Is there a way to show the thermal compensation ON on the CMM report? Please advise how it is achieved if so. One of our customers is requiring it in their standards.
Close PC-DMIS before doing this :
Open start menu, start typing Settings Editor. Make sure it is the correct version if you have multiple PC-DMIS versions installed.
Press Connect, and wait until it loads. Then in the Search Field type "TempComp" and then change the "Current Value" from a 2 to a 1. Per use above Probe_101
Close PC-DMIS before doing this :
Open start menu, start typing Settings Editor. Make sure it is the correct version if you have multiple PC-DMIS versions installed.
Press Connect, and wait until it loads. Then in the Search Field type "TempComp" and then change the "Current Value" from a 2 to a 1. Per use above Probe_101
