pcdmis 2021.2 ++
Selecting the cad surfaces I need for a Linear Closed Scan, generate the path and the path is not creating points on every selected CAD surface.
Any ideas? 
This happens if using LINEAR OPEN/CLOSED SCAN
Also increasing/decreasing point density doesn't have an impact.
Could be the vectors maybe? I noticed your cut plane vector is off...
I'm assuming it should be 0,0,1 since your start and direction points are both at the same Z depth.
Could be the vectors maybe? I noticed your cut plane vector is off...
I'm assuming it should be 0,0,1 since your start and direction points are both at the same Z depth.
