inserting multiple comments at once...

Question

Afternoon, 
 
 I was wondering if you could insert multiple COMMENT/REPT at a time? 
 for example: 
 
 COMMENT/REPT, 1 G-7 Hole Dia. .120 +/- 0.005 COMMENT/REPT, 1 H-6 Location .470 BASIC COMMENT/REPT, 1 A-6 Location 1.469 BASIC COMMENT/REPT, 1 G-7 |POS|Dia. .014(M)|A|B|C| Noted COMMENT/REPT, 1 G-7 Depth 2.245 +/- 0.015 COMMENT/REPT, 1 G-7 Counterbore Dia. .159 +/- 0.002 COMMENT/REPT, 1 A-3 |POS|Dia. .006(M)|Dia. .120| Noted 
 
 After they are inserted I go back and add the actual dimensions in between. 
 I can fill them out 1 at a time, but that is slow and very tedious... 
 
 thank you much!

louisd · Answer

Ok i get it, so you are producing a note, explaining what each dimensional feature is, which you then insert the dimension between each comment, after the fact. 
 With your current reporting strategy, no matter what path you take, you will be stuck typing in the print's specific zone and dimensional control. There's just no avoiding that. 
 Respectfully, it seems a bit redundant to type all that in. 
 Can't you just "ballon" a drawing with each feature being represented by a bubble containing a numerical value... Then use the dimension ID's as numerical identifiers, let the actual dimension's controls dictate nominal +/-tol's etc. That is kind-of industry standard practice (AS9100 etc) for FAIR reporting.