Probe Profile

You can find and edit your probe file to create the one you are looking for, then paste it into your usrprobes.dat file.

(just an example)
ITEM:TIP1.0BY35.5MMSHNK M2
HxPartNumber 03969278
HxPartName M2-SPHERICAL CYLINDER STYLUS (TC/TC-1-L35.5)
begintip
ribcount 10
color 142 142 142
cylinder 0 0 0 0 0 -2.5 3
cone 0 0 -2.5 3 0 0 -7.5 1
color 255 0 0
cylinder 0 0 -7.5 0 0 -35.5 1  <--- this line should the "end" of the shank
sphere 0 0 -35.5 1
hotspot 0 0 -35.5 0 0 1 1 15 shank
endtip

You would just need to change the -35.5 to be the correct number you need, -15 in your case. 

You can find and edit your probe file to create the one you are looking for, then paste it into your usrprobes.dat file.

(just an example)
ITEM:TIP1.0BY35.5MMSHNK M2
HxPartNumber 03969278
HxPartName M2-SPHERICAL CYLINDER STYLUS (TC/TC-1-L35.5)
begintip
ribcount 10
color 142 142 142
cylinder 0 0 0 0 0 -2.5 3
cone 0 0 -2.5 3 0 0 -7.5 1
color 255 0 0
cylinder 0 0 -7.5 0 0 -35.5 1  <--- this line should the "end" of the shank
sphere 0 0 -35.5 1
hotspot 0 0 -35.5 0 0 1 1 15 shank
endtip

You would just need to change the -35.5 to be the correct number you need, -15 in your case. 

It worked. I did change the name of item as well so other operators will not get confused. Bundle of Thanks.

C:\Program Files\Hexagon\PC-DMIS 2020 R1 64-bit\PROBE.DAT

Sweet! Glad it worked out.  

Also.. Noticed there are spaces in your probe names, the Demon does not like spaces!

Under_scores are where you want to be at! 

Thanks. I will double check.