Controller Lost Home Position

Pc-Dmis 2023.2 crashed while using Global 07.10.07 resulting in 200mm shift in the Home position!! machine is now inoperable as it stands. Is there a way to reset this home position or will I need to get Support to look into it??

Parents

0 Wakkadder 10 months ago

I can Only Move in X Minus about 50mm from the new Home Pos, but I can try moving as far as I can in that direction and shutting the controller down.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 Wakkadder 10 months ago

I can Only Move in X Minus about 50mm from the new Home Pos, but I can try moving as far as I can in that direction and shutting the controller down.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

0 Neil Challinor 10 months ago in reply to Wakkadder

If you hit the E-Stop so that the motors are disengaged, can you manually push the bridge closer to the original home position? Only try to push the driven leg.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel