ASKING QUESTIION FOR ANOTHER PROGRAMMER. WE HAVE A HEXAGON 7.10.7 SF WITH SCAN HEXAGON SCAN MODUAL. THEY HAVE CHANGED SCAN SPEED IN PROGRAM TO SCAN SURFACE TO VARIOUS DIFFERENT SPEED TO SCAN FASTER. BOTH OF THESE CMMS ON THE FLOOR WILL NAT CHANGE. MEANING SCAN SPEED TO 50 MMS OR 100MMS MACHINE SCANS SAME SPEED. WILL NOT CHANGE. THERE ARE DEFAULT SCAN SPPEDS IN F5, IS THERE ANOTHER SPOT TO LOOK FOR DEFAULT SETTING THAT COULD AFFECT THIS?
THANKS
