Measurment Routine Template

Question

So I was doing some reading in the PC-DMI Help file and found something about Measurement Routine Templates. 
 https://docs.hexagonmi.com/pcdmis/2022.2/en/helpcenter/index.htm#t=mergedProjects%2Fcore%2F03_user_topics%2FUsing_Measurement_Routine_Templates.htm&rhsearch=Routine%20Template&rhhlterm=Routine%20Template&rhsyns=%20 
 
 Reading this help article I feel like im missing something. 
 I dont see either of those things in PC-DMIS vvvvvvvvvvv

From the Home page, from that measurement routine 's tile, access the ... menu option.

Choose Add Template to show the Add Template dialog box.

I just need a little bit of guidance on this. Either I'm missing a step or things have changed since that help article has been written 
 
 Thanks agin

WilliamL · Accepted Answer

That program then becomes a template that can be used for making new programs with. To control what part of the program becomes the template you need to use these start and end commands.

#TEMPLATE_COMMAND_START_POINT#
#TEMPLATE COMMAND_END_POINT#

$$ NO,
            #TEMPLATE_COMMAND_START_POINT#
CR1        =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
            THEO/<0,0,0>,<0,-1,0>,0.88,0
            ACTL/<0,0,0>,<0,-1,0>,0.88,0
            TARG/<0,0,0>,<0,-1,0>
            START ANG=0,END ANG=360
            ANGLE VEC=<1,0,0>
            DIRECTION=CCW
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
$$ NO,
            #TEMPLATE_COMMAND_END_POINT#

What PC-DMIS actually does is just open that original program the template is created from and copy + pastes it into your newly created program with that template.

I personally haven't used it as I do not know if that it is useful for me. If there's any special reporting formats we use, I can just paste the information in myself.