DIMENSIONS NOT LINING UP WITH PART

Here is my program and the part its offset from the cad and idk how to fix it.

PART NAME  : OUTER MEMBER NEW
REV NUMBER : B
SER NUMBER : 
STATS COUNT : 1
 
STARTUP    =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES
            ALIGNMENT/END
            MODE/MANUAL
            MANRETRACT/0.05
            PREHIT/0.05
            RETRACT/0.05
            FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;MEAS,NOM,TOL,DEV,OUTTOL, , 
            TEMPCOMP/METHOD = AUTOMATIC,MATERIAL = Zerodur; Nexcera,CTE=0
              ,SET WARNING LIMIT = FALSE,MINIMUM = 10,MAXIMUM = 40
              ,PART SENSOR NUM=DEFAULT,X SCALE= 25.1189,Y SCALE= 24.5048,Z SCALE= 25.2557,PART TEMP=24.7319
            LOADPROBE/SPHERE PROBE
            TIP/T1A0B0, SHANKIJK=0, 0, 1, ANGLE=0
MAN_ALIGN  =GROUP/SHOWALLPARAMS=YES
PLN1         =FEAT/PLANE,CARTESIAN,TRIANGLE
              THEO/<-0.0102,0.0202,0.032>,<0,0,1>
              ACTL/<5.5831,3.1116,-15.1784>,<0.000016,-0.0036903,0.9999932>
              MEAS/PLANE,4
                HIT/BASIC,NORMAL,<-0.4827,0.1388,0.032>,<0,0,1>,<5.1077,3.2421,-15.1779>,USE THEO=YES
                HIT/BASIC,NORMAL,<-0.4771,-0.1359,0.032>,<0,0,1>,<5.1077,3.0025,-15.1787>,USE THEO=YES
                MOVE/POINT,NORMAL,<6.044,3.0247,-14.5728>
                HIT/BASIC,NORMAL,<0.4634,-0.0925,0.032>,<0,0,1>,<6.0585,3.0025,-15.1789>,USE THEO=YES
                HIT/BASIC,NORMAL,<0.4554,0.1702,0.032>,<0,0,1>,<6.0585,3.1992,-15.178>,USE THEO=YES
              ENDMEAS/
A1           =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
                ALIGNMENT/LEVEL,ZPLUS,PLN1
                ALIGNMENT/TRANS,ZAXIS,PLN1
              ALIGNMENT/END
CIR1         =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
              THEO/<0,0,0.016>,<0,0,1>,0.725,0
              ACTL/<5.5871,3.0538,0.016>,<0,0,1>,0.7293,0
              TARG/<0,0,0.016>,<0,0,1>
              START ANG=0,END ANG=360
              ANGLE VEC=<1,0,0>
              DIRECTION=CCW
              SHOW FEATURE PARAMETERS=YES
                VOID DETECTION=NO
                REMEASURE=NO
                SURFACE=THICKNESS_NONE,0
                MEASURE MODE=NOMINALS
                RMEAS=NONE,NONE,NONE
                AUTO WRIST=NO
                GRAPHICAL ANALYSIS=NO
                FEATURE LOCATOR=NO,NO,""
              SHOW CONTACT PARAMETERS=YES
                NUMHITS=5,DEPTH=0.03,PITCH=0
                SAMPLE METHOD=SAMPLE_HITS
                SAMPLE HITS=0,SPACER=0
                AVOIDANCE MOVE=NO
                FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
              SHOW HITS=YES
                HIT/BASIC,<0.3625,0,0.046>,<1,0,0>,<5.9516,3.0721,0.0361>
                HIT/BASIC,<0.112,0.3448,0.046>,<0.309017,0.9510565,0>,<5.8091,3.3402,0.0482>
                HIT/BASIC,<-0.2933,0.2131,0.046>,<-0.809017,0.5877853,0>,<5.2737,3.2475,0.0314>
                HIT/BASIC,<-0.2933,-0.2131,0.046>,<-0.809017,-0.5877853,0>,<5.275,2.8737,0.0328>
                HIT/BASIC,<0.112,-0.3448,0.046>,<0.309017,-0.9510565,0>,<5.6577,2.6936,0.0335>
              ENDMEAS/
A2           =ALIGNMENT/START,RECALL:A1,LIST=YES
                ALIGNMENT/TRANS,XAXIS,CIR1
                ALIGNMENT/TRANS,YAXIS,CIR1
                ALIGNMENT/TRANS,ZAXIS,CIR1
              ALIGNMENT/END
CIR2         =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
              THEO/<0.625,0,-0.016>,<0,0,1>,0.134
              ACTL/<0.6291,-0.0003,-0.016>,<0,0,1>,0.1335
              TARG/<0.625,0,-0.016>,<0,0,1>
              START ANG=0,END ANG=360
              ANGLE VEC=<1,0,0>
              DIRECTION=CCW
              SHOW FEATURE PARAMETERS=YES
                VOID DETECTION=NO
                REMEASURE=NO
                SURFACE=THICKNESS_NONE,0
                MEASURE MODE=NOMINALS
                RMEAS=NONE,NONE,NONE
                AUTO WRIST=NO
                GRAPHICAL ANALYSIS=NO
                FEATURE LOCATOR=NO,NO,""
              SHOW CONTACT PARAMETERS=YES
                NUMHITS=5,DEPTH=0.06,PITCH=0
                SAMPLE METHOD=SAMPLE_HITS
                SAMPLE HITS=0,SPACER=0
                AVOIDANCE MOVE=NO
                FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
              SHOW HITS=YES
                HIT/BASIC,<0.692,0,-0.076>,<-1,0,0>,<0.678,0.0452,-0.0784>
                HIT/BASIC,<0.6457,0.0637,-0.076>,<-0.309017,-0.9510565,0>,<0.6225,0.0659,-0.0785>
                HIT/BASIC,<0.5708,0.0394,-0.076>,<0.809017,-0.5877853,0>,<0.5627,0.0089,-0.0784>
                HIT/BASIC,<0.5708,-0.0394,-0.076>,<0.809017,0.5877853,0>,<0.5975,-0.0589,-0.0783>
                HIT/BASIC,<0.6457,-0.0637,-0.076>,<-0.309017,0.9510565,0>,<0.6814,-0.042,-0.0783>
              ENDMEAS/
A3           =ALIGNMENT/START,RECALL:A2,LIST=YES
                ALIGNMENT/ROTATE,XPLUS,TO,CIR1,ABOUT,ZPLUS
                ALIGNMENT/TRANS,XAXIS,CIR1
                ALIGNMENT/TRANS,YAXIS,CIR1
                ALIGNMENT/TRANS,ZAXIS,CIR1
              ALIGNMENT/END
A4           =ALIGNMENT/START,RECALL:A3,LIST=YES
                ALIGNMENT/LEVEL,ZPLUS,CIR2
                ALIGNMENT/ROTATE,XPLUS,TO,CIR2,ABOUT,ZPLUS
              ALIGNMENT/END
            ENDGROUP/ID=MAN_ALIGN
            MODE/DCC
DCC_ALIGN  =GROUP/SHOWALLPARAMS=YES
PLN1_DCC     =FEAT/PLANE,CARTESIAN,TRIANGLE
              THEO/<-0.0102,0.0202,-0.016>,<0,0,1>
              ACTL/<3.0772,-5.5734,15.2056>,<-0.00369,-0.0000449,0.9999932>
              MEAS/PLANE,4
                HIT/BASIC,NORMAL,<-0.4827,0.1388,-0.016>,<0,0,1>,<2.9621,-6.0468,15.2052>,USE THEO=YES
                HIT/BASIC,NORMAL,<-0.4771,-0.1359,-0.016>,<0,0,1>,<3.2368,-6.039,15.2062>,USE THEO=YES
                MOVE/POINT,NORMAL,<-5.5753,-3.8201,-14.6208>
                HIT/BASIC,NORMAL,<0.4634,-0.0925,-0.016>,<0,0,1>,<3.186,-5.0989,15.206>,USE THEO=YES
                HIT/BASIC,NORMAL,<0.4554,0.1702,-0.016>,<0,0,1>,<2.9233,-5.109,15.2051>,USE THEO=YES
              ENDMEAS/
A1_DCC       =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
                ALIGNMENT/LEVEL,ZPLUS,PLN1_DCC
                ALIGNMENT/TRANS,ZAXIS,PLN1_DCC
              ALIGNMENT/END
CIR1_DCC     =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
              THEO/<0,0,0.016>,<0,0,1>,0.725,0
              ACTL/<0,0,0.016>,<0,0,1>,0.725,0
              TARG/<0,0,0.016>,<0,0,1>
              START ANG=0,END ANG=360
              ANGLE VEC=<1,0,0>
              DIRECTION=CCW
              SHOW FEATURE PARAMETERS=YES
                VOID DETECTION=NO
                REMEASURE=NO
                SURFACE=THICKNESS_NONE,0
                MEASURE MODE=NOMINALS
                RMEAS=NONE,NONE,NONE
                AUTO WRIST=NO
                CIRCULAR MOVES=STRAIGHT
                GRAPHICAL ANALYSIS=NO
                FEATURE LOCATOR=NO,NO,""
              SHOW CONTACT PARAMETERS=YES
                NUMHITS=5,DEPTH=0.03,PITCH=0
                SAMPLE METHOD=SAMPLE_HITS
                SAMPLE HITS=0,SPACER=0
                AVOIDANCE MOVE=NO
                FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
              SHOW HITS=YES
                HIT/BASIC,<0.3625,0,0.046>,<1,0,0>,<0.3625,0,0.046>
                HIT/BASIC,<0.112,0.3448,0.046>,<0.309017,0.9510565,0>,<0.112,0.3448,0.046>
                HIT/BASIC,<-0.2933,0.2131,0.046>,<-0.809017,0.5877853,0>,<-0.2933,0.2131,0.046>
                HIT/BASIC,<-0.2933,-0.2131,0.046>,<-0.809017,-0.5877853,0>,<-0.2933,-0.2131,0.046>
                HIT/BASIC,<0.112,-0.3448,0.046>,<0.309017,-0.9510565,0>,<0.112,-0.3448,0.046>
              ENDMEAS/
A2_DCC       =ALIGNMENT/START,RECALL:A1_DCC,LIST=YES
                ALIGNMENT/TRANS,XAXIS,CIR1_DCC
                ALIGNMENT/TRANS,YAXIS,CIR1_DCC
                ALIGNMENT/TRANS,ZAXIS,CIR1_DCC
              ALIGNMENT/END
CIR2_DCC     =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
              THEO/<0.625,0,-0.016>,<0,0,1>,0.134
              ACTL/<0.625,0,-0.016>,<0,0,1>,0.134
              TARG/<0.625,0,-0.016>,<0,0,1>
              START ANG=0,END ANG=360
              ANGLE VEC=<1,0,0>
              DIRECTION=CCW
              SHOW FEATURE PARAMETERS=YES
                VOID DETECTION=NO
                REMEASURE=NO
                SURFACE=THICKNESS_NONE,0
                MEASURE MODE=NOMINALS
                RMEAS=NONE,NONE,NONE
                AUTO WRIST=NO
                CIRCULAR MOVES=STRAIGHT
                GRAPHICAL ANALYSIS=NO
                FEATURE LOCATOR=NO,NO,""
              SHOW CONTACT PARAMETERS=YES
                NUMHITS=5,DEPTH=0.06,PITCH=0
                SAMPLE METHOD=SAMPLE_HITS
                SAMPLE HITS=0,SPACER=0
                AVOIDANCE MOVE=NO
                FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
              SHOW HITS=YES
                HIT/BASIC,<0.692,0,-0.076>,<-1,0,0>,<0.692,0,-0.076>
                HIT/BASIC,<0.6457,0.0637,-0.076>,<-0.309017,-0.9510565,0>,<0.6457,0.0637,-0.076>
                HIT/BASIC,<0.5708,0.0394,-0.076>,<0.809017,-0.5877853,0>,<0.5708,0.0394,-0.076>
                HIT/BASIC,<0.5708,-0.0394,-0.076>,<0.809017,0.5877853,0>,<0.5708,-0.0394,-0.076>
                HIT/BASIC,<0.6457,-0.0637,-0.076>,<-0.309017,0.9510565,0>,<0.6457,-0.0637,-0.076>
              ENDMEAS/
A3_DCC       =ALIGNMENT/START,RECALL:A2_DCC,LIST=YES
                ALIGNMENT/ROTATE,XPLUS,TO,CIR1_DCC,ABOUT,ZPLUS
                ALIGNMENT/TRANS,XAXIS,CIR1_DCC
                ALIGNMENT/TRANS,YAXIS,CIR1_DCC
                ALIGNMENT/TRANS,ZAXIS,CIR1_DCC
              ALIGNMENT/END
A4_DCC       =ALIGNMENT/START,RECALL:A3_DCC,LIST=YES
                ALIGNMENT/LEVEL,ZPLUS,CIR2_DCC
                ALIGNMENT/ROTATE,XPLUS,TO,CIR2_DCC,ABOUT,ZPLUS
              ALIGNMENT/END
            ENDGROUP/ID=DCC_ALIGN

Parents

0 brian.freeman 5 months ago

Take a look at your alignments!! You level and origin on PLN1, then you origin at CIR1, then ROTATE to CIR1 with nothing else and origin to CIR1.

The level to CIR2 and ROTATE to CIR2 (with nothing else)

How about this:

LEVEL to PLN1

ROTATE XPLUS CIR1 to CIR2 about Z plus

Origin PLN1 (Z+), CIR1 (X + and Y+)
Cancel
Vote Up +2 Vote Down

Sign in to reply

Verify Answer

Cancel

0 sscandlon 5 months ago in reply to brian.freeman

ART NAME  : test
REV NUMBER : 
SER NUMBER : 
STATS COUNT : 1
 
STARTUP    =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES
            ALIGNMENT/END
            MODE/MANUAL
            MANRETRACT/0.02
            PREHIT/0.04
            RETRACT/0.04
            FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;MEAS,NOM,TOL,DEV,OUTTOL, , 
            TEMPCOMP/METHOD = AUTOMATIC,MATERIAL = Zerodur; Nexcera,CTE=0
              ,SET WARNING LIMIT = FALSE,MINIMUM = 10,MAXIMUM = 40
              ,PART SENSOR NUM=DEFAULT,X SCALE= 25.0177,Y SCALE= 24.4215,Z SCALE= 25.086,PART TEMP=24.6865
            LOADPROBE/SPHERE PROBE
            TIP/T1A0B0, SHANKIJK=0, 0, 1, ANGLE=0
MAN_ALIGN  =GROUP/SHOWALLPARAMS=YES
PLN1         =FEAT/PLANE,CARTESIAN,TRIANGLE
              THEO/<-0.0062,0.0224,0.032>,<0,0,1>
              ACTL/<5.5988,3.0905,-15.1779>,<-0.0002656,-0.0037079,0.9999931>
              MEAS/PLANE,4
                HIT/BASIC,NORMAL,<-0.4643,0.1774,0.032>,<0,0,1>,<5.1183,3.2049,-15.1778>,USE THEO=YES
                HIT/BASIC,NORMAL,<-0.4581,-0.1435,0.032>,<0,0,1>,<5.1182,2.9585,-15.1784>,USE THEO=YES
                MOVE/POINT,NORMAL,<6.0823,3.0337,-14.6521>
                HIT/BASIC,NORMAL,<0.4612,-0.1188,0.032>,<0,0,1>,<6.0793,2.9585,-15.1784>,USE THEO=YES
                HIT/BASIC,NORMAL,<0.4365,0.1744,0.032>,<0,0,1>,<6.0794,3.2401,-15.1771>,USE THEO=YES
              ENDMEAS/
A1           =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
                ALIGNMENT/LEVEL,ZPLUS,PLN1
                ALIGNMENT/TRANS,ZAXIS,PLN1
              ALIGNMENT/END
CIR1         =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
              THEO/<0,0,0.088>,<0,0,1>,0.725,0
              ACTL/<5.5884,3.0626,0.088>,<0,0,1>,0.7379,0
              TARG/<0,0,0.088>,<0,0,1>
              START ANG=0,END ANG=360
              ANGLE VEC=<1,0,0>
              DIRECTION=CCW
              SHOW FEATURE PARAMETERS=YES
                VOID DETECTION=NO
                REMEASURE=NO
                SURFACE=THICKNESS_NONE,0
                MEASURE MODE=NOMINALS
                RMEAS=NONE,NONE,NONE
                AUTO WRIST=NO
                GRAPHICAL ANALYSIS=NO
                FEATURE LOCATOR=NO,NO,""
              SHOW CONTACT PARAMETERS=YES
                NUMHITS=5,DEPTH=-0.05,PITCH=0
                SAMPLE METHOD=SAMPLE_HITS
                SAMPLE HITS=0,SPACER=0
                AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
                FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
              SHOW HITS=YES
                HIT/BASIC,<0.3625,0,0.038>,<1,0,0>,<5.9471,3.068,0.0364>
                HIT/BASIC,<0.112,0.3448,0.038>,<0.309017,0.9510565,0>,<5.6339,3.445,0.0291>
                HIT/BASIC,<-0.2933,0.2131,0.038>,<-0.809017,0.5877853,0>,<5.3503,3.3275,0.0327>
                HIT/BASIC,<-0.2933,-0.2131,0.038>,<-0.809017,-0.5877853,0>,<5.285,2.8499,0.0568>
                HIT/BASIC,<0.112,-0.3448,0.038>,<0.309017,-0.9510565,0>,<5.6681,2.6968,0.0572>
              ENDMEAS/
A2           =ALIGNMENT/START,RECALL:A1,LIST=YES
                ALIGNMENT/LEVEL,ZPLUS,PLN1
                ALIGNMENT/TRANS,ZAXIS,PLN1
                ALIGNMENT/TRANS,XAXIS,CIR1
                ALIGNMENT/TRANS,YAXIS,CIR1
              ALIGNMENT/END
CIR2         =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
              THEO/<0.625,0,0>,<0,0,1>,0.134
              ACTL/<0.6228,-0.0088,0>,<0,0,1>,0.1335
              TARG/<0.625,0,0>,<0,0,1>
              START ANG=0,END ANG=360
              ANGLE VEC=<1,0,0>
              DIRECTION=CCW
              SHOW FEATURE PARAMETERS=YES
                VOID DETECTION=NO
                REMEASURE=NO
                SURFACE=THICKNESS_NONE,0
                MEASURE MODE=NOMINALS
                RMEAS=NONE,NONE,NONE
                AUTO WRIST=NO
                GRAPHICAL ANALYSIS=NO
                FEATURE LOCATOR=NO,NO,""
              SHOW CONTACT PARAMETERS=YES
                NUMHITS=5,DEPTH=0.06,PITCH=0
                SAMPLE METHOD=SAMPLE_HITS
                SAMPLE HITS=0,SPACER=0
                AVOIDANCE MOVE=NO
                FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
              SHOW HITS=YES
                HIT/BASIC,<0.692,0,-0.06>,<-1,0,0>,<0.6843,0.0174,-0.0423>
                HIT/BASIC,<0.6457,0.0637,-0.06>,<-0.309017,-0.9510565,0>,<0.6483,0.0528,-0.0423>
                HIT/BASIC,<0.5708,0.0394,-0.06>,<0.809017,-0.5877853,0>,<0.5637,0.0222,-0.0423>
                HIT/BASIC,<0.5708,-0.0394,-0.06>,<0.809017,0.5877853,0>,<0.5712,-0.0514,-0.0421>
                HIT/BASIC,<0.6457,-0.0637,-0.06>,<-0.309017,0.9510565,0>,<0.6455,-0.0714,-0.0421>
              ENDMEAS/
A3           =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
                ALIGNMENT/LEVEL,ZPLUS,PLN1
                ALIGNMENT/TRANS,ZAXIS,PLN1
                ALIGNMENT/TRANS,XAXIS,CIR1
                ALIGNMENT/TRANS,YAXIS,CIR1
                ALIGNMENT/ROTATE_CIRCLE,XPLUS,TO,CIR1,AND,CIR2,ABOUT,ZPLUS
              ALIGNMENT/END
            ENDGROUP/ID=MAN_ALIGN
DCC_ALIGN  =GROUP/SHOWALLPARAMS=NO
            ENDGROUP/ID=DCC_ALIGN

0 sscandlon 5 months ago in reply to sscandlon

changed it its still not doing the DCC check
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 brian.freeman 5 months ago in reply to sscandlon

Do the same thing with the DCC alignments.

But before you do that ensure your theos are correct

They seem to get jumbled up when you change the alignments around.

A bit of advise (LEVEL, ROTATE, then ORIGIN)
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

0 sscandlon 5 months ago in reply to sscandlon

PART NAME  : test
REV NUMBER : 
SER NUMBER : 
STATS COUNT : 1
 
STARTUP    =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES
            ALIGNMENT/END
            MODE/MANUAL
            MANRETRACT/0.02
            PREHIT/0.04
            RETRACT/0.04
            FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;MEAS,NOM,TOL,DEV,OUTTOL, , 
            TEMPCOMP/METHOD = AUTOMATIC,MATERIAL = Zerodur; Nexcera,CTE=0
              ,SET WARNING LIMIT = FALSE,MINIMUM = 10,MAXIMUM = 40
              ,PART SENSOR NUM=DEFAULT,X SCALE= 24.9595,Y SCALE= 24.3689,Z SCALE= 25.0227,PART TEMP=24.6008
            LOADPROBE/SPHERE PROBE
            TIP/T1A0B0, SHANKIJK=0, 0, 1, ANGLE=0
MAN_ALIGN  =GROUP/SHOWALLPARAMS=YES
PLN1         =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,NONE,LEAST_SQR
              THEO/<-0.4562,0.0488,0.032>,<0,0,1>
              ACTL/<5.5777,3.1188,-15.178>,<0.0000529,-0.0050461,0.9999873>
              TARG/<-0.4562,0.0488,0.032>,<0,0,1>
              ANGLE VEC=<1,0,0>,SQUARE
              SHOW FEATURE PARAMETERS=YES
                VOID DETECTION=NO
                SURFACE=THICKNESS_NONE,0
                MEASURE MODE=MASTER
                RMEAS=NONE,NONE,NONE
                AUTO WRIST=NO
                GRAPHICAL ANALYSIS=NO
                FEATURE LOCATOR=NO,NO,""
              SHOW CONTACT PARAMETERS=YES
                NUMHITS=2,NUMROWS=2
                SPACER=0
                AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
              SHOW HITS=YES
                HIT/BASIC,<-0.4778,0.1541,0.032>,<0,0,1>,<5.1093,3.1976,-15.1778>
                HIT/BASIC,<-0.486,-0.174,0.032>,<0,0,1>,<5.1093,2.9996,-15.1784>
                MOVE/POINT,NORMAL<5.9367,3.1011,-14.334>
                HIT/BASIC,<0.4689,-0.1505,0.032>,<0,0,1>,<6.046,3.0004,-15.1788>
                HIT/BASIC,<0.4733,0.1405,0.032>,<0,0,1>,<6.0461,3.2776,-15.1771>
              ENDMEAS/
A1           =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
                ALIGNMENT/LEVEL,ZPLUS,PLN1
                ALIGNMENT/TRANS,ZAXIS,PLN1
              ALIGNMENT/END
CIR1         =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
              THEO/<0,0,0.088>,<0,0,1>,0.725,0
              ACTL/<5.5906,3.0302,0.088>,<0,0,1>,0.7249,0
              TARG/<0,0,0.088>,<0,0,1>
              START ANG=0,END ANG=360
              ANGLE VEC=<1,0,0>
              DIRECTION=CCW
              SHOW FEATURE PARAMETERS=YES
                VOID DETECTION=NO
                REMEASURE=NO
                SURFACE=THICKNESS_NONE,0
                MEASURE MODE=NOMINALS
                RMEAS=NONE,NONE,NONE
                AUTO WRIST=NO
                GRAPHICAL ANALYSIS=NO
                FEATURE LOCATOR=NO,NO,""
              SHOW CONTACT PARAMETERS=YES
                NUMHITS=5,DEPTH=-0.05,PITCH=0
                SAMPLE METHOD=SAMPLE_HITS
                SAMPLE HITS=0,SPACER=0
                AVOIDANCE MOVE=NO
                FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
              SHOW HITS=YES
                HIT/BASIC,<0.3625,0,0.038>,<1,0,0>,<5.9519,3.048,0.0505>
                HIT/BASIC,<0.112,0.3448,0.038>,<0.309017,0.9510565,0>,<5.8047,3.3233,0.049>
                HIT/BASIC,<-0.2933,0.2131,0.038>,<-0.809017,0.5877853,0>,<5.2854,3.2255,0.0463>
                HIT/BASIC,<-0.2933,-0.2131,0.038>,<-0.809017,-0.5877853,0>,<5.3932,2.7265,0.0491>
                HIT/BASIC,<0.112,-0.3448,0.038>,<0.309017,-0.9510565,0>,<5.7469,2.7026,0.0493>
              ENDMEAS/
A2           =ALIGNMENT/START,RECALL:A1,LIST=YES
                ALIGNMENT/LEVEL,ZPLUS,PLN1
                ALIGNMENT/TRANS,ZAXIS,PLN1
                ALIGNMENT/TRANS,XAXIS,CIR1
                ALIGNMENT/TRANS,YAXIS,CIR1
              ALIGNMENT/END
CIR2         =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
              THEO/<0.625,0,0>,<0,0,1>,0.134
              ACTL/<0.6257,0.0028,0>,<0,0,1>,0.1336
              TARG/<0.625,0,0>,<0,0,1>
              START ANG=0,END ANG=360
              ANGLE VEC=<1,0,0>
              DIRECTION=CCW
              SHOW FEATURE PARAMETERS=YES
                VOID DETECTION=NO
                REMEASURE=NO
                SURFACE=THICKNESS_NONE,0
                MEASURE MODE=NOMINALS
                RMEAS=NONE,NONE,NONE
                AUTO WRIST=NO
                GRAPHICAL ANALYSIS=NO
                FEATURE LOCATOR=NO,NO,""
              SHOW CONTACT PARAMETERS=YES
                NUMHITS=4,DEPTH=0.06,PITCH=0
                SAMPLE METHOD=SAMPLE_HITS
                SAMPLE HITS=0,SPACER=0
                AVOIDANCE MOVE=NO
                FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
              SHOW HITS=YES
                HIT/BASIC,<0.692,0,-0.06>,<-1,0,0>,<0.6796,0.0426,-0.0713>
                HIT/BASIC,<0.625,0.067,-0.06>,<0,-1,0>,<0.6436,0.0671,-0.0713>
                HIT/BASIC,<0.558,0,-0.06>,<1,0,0>,<0.5651,0.031,-0.0712>
                HIT/BASIC,<0.625,-0.067,-0.06>,<0,1,0>,<0.6014,-0.0593,-0.071>
              ENDMEAS/
A3           =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
                ALIGNMENT/LEVEL,ZPLUS,PLN1
                ALIGNMENT/TRANS,ZAXIS,PLN1
                ALIGNMENT/TRANS,XAXIS,CIR1
                ALIGNMENT/TRANS,YAXIS,CIR1
                ALIGNMENT/ROTATE_CIRCLE,XPLUS,TO,CIR1,AND,CIR2,ABOUT,ZPLUS
              ALIGNMENT/END
            ENDGROUP/ID=MAN_ALIGN
DCC_ALIGN  =GROUP/SHOWALLPARAMS=YES
              COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO,OVC=NO,
              Changing to DCC mode! Do not continue unless avoidance moves have been added.
              MODE/DCC
PLN1_DCC     =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,NONE,LEAST_SQR
              THEO/<-0.4562,0.0488,0>,<0,0,1>
              ACTL/<-0.4562,0.0488,0>,<0,0,1>
              TARG/<-0.4562,0.0488,0>,<0,0,1>
              ANGLE VEC=<1,0,0>,SQUARE
              SHOW FEATURE PARAMETERS=YES
                VOID DETECTION=NO
                SURFACE=THICKNESS_NONE,0
                MEASURE MODE=MASTER
                RMEAS=NONE,NONE,NONE
                AUTO WRIST=NO
                CIRCULAR MOVES=STRAIGHT
                GRAPHICAL ANALYSIS=NO
                FEATURE LOCATOR=NO,NO,""
              SHOW CONTACT PARAMETERS=YES
                NUMHITS=2,NUMROWS=2
                SPACER=0
                AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
              SHOW HITS=YES
                HIT/BASIC,<-0.4448,0.1645,0>,<0,0,1>,<-0.4448,0.1645,0>
                HIT/BASIC,<-0.4507,-0.1829,0>,<0,0,1>,<-0.4507,-0.1829,0>
                MOVE/POINT,NORMAL<5.9367,3.1011,-14.334>
                HIT/BASIC,<0.4807,-0.1716,0>,<0,0,1>,<0.4807,-0.1716,0>
                HIT/BASIC,<0.4846,0.1402,0>,<0,0,1>,<0.4846,0.1402,0>
              ENDMEAS/
A3_DCC1      =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
                ALIGNMENT/LEVEL,ZPLUS,PLN1_DCC
                ALIGNMENT/TRANS,ZAXIS,PLN1_DCC
                ALIGNMENT/TRANS,XAXIS,CIR1
                ALIGNMENT/TRANS,YAXIS,CIR1
                ALIGNMENT/ROTATE_CIRCLE,XPLUS,TO,CIR1,AND,CIR2,ABOUT,ZPLUS
              ALIGNMENT/END
CIR1_DCC     =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
              THEO/<0,0,0.088>,<0,0,1>,0.725,0
              ACTL/<-5.6043,-3.0041,15.3133>,<-0.0000299,0.0050463,0.9999873>,0.725,0
              TARG/<0,0,0.088>,<0,0,1>
              START ANG=0,END ANG=360
              ANGLE VEC=<1,0,0>
              DIRECTION=CCW
              SHOW FEATURE PARAMETERS=YES
                VOID DETECTION=NO
                REMEASURE=NO
                SURFACE=THICKNESS_NONE,0
                MEASURE MODE=NOMINALS
                RMEAS=NONE,NONE,NONE
                AUTO WRIST=NO
                CIRCULAR MOVES=STRAIGHT
                GRAPHICAL ANALYSIS=NO
                FEATURE LOCATOR=NO,NO,""
              SHOW CONTACT PARAMETERS=YES
                NUMHITS=5,DEPTH=-0.05,PITCH=0
                SAMPLE METHOD=SAMPLE_HITS
                SAMPLE HITS=0,SPACER=0
                AVOIDANCE MOVE=NO
                FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
              SHOW HITS=YES
                HIT/BASIC,<0.3625,0,0.038>,<1,0,0>,<-5.2418,-3.006,15.2633>
                HIT/BASIC,<0.112,0.3448,0.038>,<0.309017,0.9510565,0>,<-5.4907,-2.6601,15.2615>
                HIT/BASIC,<-0.2933,0.2131,0.038>,<-0.809017,0.5877853,0>,<-5.8966,-2.79,15.2622>
                HIT/BASIC,<-0.2933,-0.2131,0.038>,<-0.809017,-0.5877853,0>,<-5.8986,-3.2161,15.2643>
                HIT/BASIC,<0.112,-0.3448,0.038>,<0.309017,-0.9510565,0>,<-5.4939,-3.3496,15.265>
              ENDMEAS/
A3_DCC2      =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
                ALIGNMENT/LEVEL,ZPLUS,PLN1_DCC
                ALIGNMENT/TRANS,ZAXIS,PLN1_DCC
                ALIGNMENT/TRANS,XAXIS,CIR1_DCC
                ALIGNMENT/TRANS,YAXIS,CIR1_DCC
                ALIGNMENT/ROTATE_CIRCLE,XPLUS,TO,CIR1_DCC,AND,CIR2,ABOUT,ZPLUS
              ALIGNMENT/END
CIR2_DCC     =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
              THEO/<0.625,0,0>,<0,0,1>,0.134
              ACTL/<0.5615,-0.2744,15.2253>,<0.0021648,0.0045584,0.9999873>,0.134
              TARG/<0.625,0,0>,<0,0,1>
              START ANG=0,END ANG=360
              ANGLE VEC=<1,0,0>
              DIRECTION=CCW
              SHOW FEATURE PARAMETERS=YES
                VOID DETECTION=NO
                REMEASURE=NO
                SURFACE=THICKNESS_NONE,0
                MEASURE MODE=NOMINALS
                RMEAS=NONE,NONE,NONE
                AUTO WRIST=NO
                CIRCULAR MOVES=STRAIGHT
                GRAPHICAL ANALYSIS=NO
                FEATURE LOCATOR=NO,NO,""
              SHOW CONTACT PARAMETERS=YES
                NUMHITS=4,DEPTH=0.06,PITCH=0
                SAMPLE METHOD=SAMPLE_HITS
                SAMPLE HITS=0,SPACER=0
                AVOIDANCE MOVE=NO
                FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
              SHOW HITS=YES
                HIT/BASIC,<0.692,0,-0.06>,<-1,0,0>,<0.6216,-0.3041,15.1653>
                HIT/BASIC,<0.625,0.067,-0.06>,<0,-1,0>,<0.5908,-0.2145,15.165>
                HIT/BASIC,<0.558,0,-0.06>,<1,0,0>,<0.5012,-0.2453,15.1653>
                HIT/BASIC,<0.625,-0.067,-0.06>,<0,1,0>,<0.532,-0.3349,15.1656>
              ENDMEAS/
A3_DCC3      =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
                ALIGNMENT/LEVEL,ZPLUS,PLN1_DCC
                ALIGNMENT/TRANS,ZAXIS,PLN1_DCC
                ALIGNMENT/TRANS,XAXIS,CIR1_DCC
                ALIGNMENT/TRANS,YAXIS,CIR1_DCC
                ALIGNMENT/ROTATE_CIRCLE,XPLUS,TO,CIR1_DCC,AND,CIR2_DCC,ABOUT,ZPLUS
              ALIGNMENT/END
            ENDGROUP/ID=DCC_ALIGN

0 sscandlon 5 months ago in reply to sscandlon

New program but still having the same issue
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 brian.freeman 5 months ago in reply to sscandlon

Something else is going on.

Your numbers are way off from where they should be.

Have you qualified the tips?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 sscandlon 5 months ago in reply to brian.freeman

Yes I have tried everything but just keep getting stuck
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 sscandlon 5 months ago in reply to brian.freeman

I also just updated my sma license me and then my windows did an automatic update
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 sscandlon 5 months ago in reply to brian.freeman

I also just updated my sma license me and then my windows did an automatic update
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

0 brian.freeman 5 months ago in reply to sscandlon

Something is amiss here:

The measured data for (measured) PLN1 is showing a move point of 5.936, 3.1011, -14.334: By previous alignments and measured data; this can't be correct.

It will not measure (in DCC) unless the move point is removed or changed. (Is it stopping at the DCC?)
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel