DRF 'AE' OK FOR ONE SET OF FEATURES BUT NOT ANOTHER

check the length on the "AB" cylinders. this happened to me a few days ago. PCdms chose to start the Z minus of the cylinder vs the Z plus. I went back and redid them and it worked. 

example AB1 length is -10 and AA1 is +10

Gotcha. Ill try that. Will let you know

AA1 and AB1 are both .25

Tried creating position callout for AA holes again this morning and I get same error. smh

its longshot but try turning off circular moves and void detection. (I have seen void detection mess up variables in the past)

Neil actually just said today that void detection can make PC-DMIS ignore variables in this thread, so you are 100% right there. I just hate void detection in general, it will never be on 

https://nexus.hexagon.com/community/public/pc-dmis/f/pc-dmis-for-cmms/139071/how-to-add-variable-hole-size

Neil actually just said today that void detection can make PC-DMIS ignore variables in this thread, so you are 100% right there. I just hate void detection in general, it will never be on 

https://nexus.hexagon.com/community/public/pc-dmis/f/pc-dmis-for-cmms/139071/how-to-add-variable-hole-size

i love when my pc-dmis issues are validated!
thank you WilliamL  for the link.

Still getting the error.