Autosave reports

 RE: Save reports in PDF automatically and use date and time as name here is where i pulled the create.bas and redraw.bas code from

Looking at that create.bas file, not sure if PC-DMIS Syntax has changed, but I have seen this a few times. What error does it give?

Change FOLDERPATH to this

"C:\USERS\ADMINISTRATOR\DOCUMENTS\TEST\\"

I do not know what (REPORT_NAME) is supposed to be. Seems to be missing something

Remove those \ from the beginning of your "FOLDERNAME" in both of your assign statements. If there is any \ outside of quotes at the end, we need to fix that one.

I can't see entire line of assign statements, but I can troubleshoot this for you.

Here is my code updated and the create.bas and the redraw.bas 

how would you have this activate only if there is no out of tolerance?

Something like this. Not able to access PC-DMIS right now, but this is from memory. You can use GETPROGRAMINFO() string function for checking if NUMOOT is greater than 0, then don't print report. If there is no out of tolerance dimensions then print the report. Using IF_GOTO Flow control and LABEL commands.

See here under the "GETPROGRAMINFO" section for more parameters.

https://docs.hexagonmi.com/pcdmis/2023.2/en/helpcenter/mergedProjects/core/26_expression_topics/String_Functions.htm

ASSIGN/V1 = GETPROGRAMINFO("NUMOOT")
            IF_GOTO/V1 == 0,GOTO = PRINTRPT
            IF_GOTO/V1 > 0,GOTO = NOPRINT
PRINTRPT       =LABEL/
            
            IF NUMOOT IS 0 PRINT THE REPORT
            INSERT ALL REQUIRED PRINTING INFORMATION AND VARIABLES IN THIS BLOCK BEFORE THE NEXT LABEL
            
NOPRINT     =LABEL/
            
            IF NUMOOT IS GREATER THAN 0, SKIP PRINTING BY GOING TO THE LABEL NOPRINT

Doublecheck your FOLDERNAME variable, it seems the construction/concatenation of FOLDERPATH and FOLDERNAME is a little funky.
For example, try with hardcoded path and filename without variables just to see that that works.

I keep getting a error when i run the create.bas do you see a issue with my code.

I tested the create.bas yesterday and I had some issues but I fixed them. Are you getting the same error as above? If you are getting something like object not defined, you need to execute the assign statement lines so that they get values. I always forget this step myself.

ASSIGN/FOLDERNAME="C:\CMM\Program Folder\Reports"

Image below of created folder.