Are these two Autojoints interchangeable? PAA1 Autojoint

Are these two autojoints interchangeable? One is from 2018 and the other is definitely 10+ years old. The one from 2018 I know is a PAA1 and I assume the older one is too? The newer one has less of the gold female connectors/prongs so I wasn't sure if I could use it on an older extension that has more male connectors/prongs that match the older autojoint.

0 Matthew D. Hoedeman 7 months ago

try it and find out....

If all you are using are TP20 (or Tp2) on that thing, it only used 2 of those connectors anyway. If it fits, it sits, and should work. The older one has those extra connectors for the old OLD legacy Renishaw attachments, like the OTP6M laser probe. www.renishaw.com/.../otp6m-legacy-probe--32918
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 WilliamL 7 months ago in reply to Matthew D. Hoedeman

Matt, do you happen to have experience using the Analog Scanning head HP-S-X1H or similar heads? I don't know what to look up to find this answer, but we have an HP-L-10.10 Laser Scanner, and it has these connectors. The HP-S-X1H does too. But when we touch with the analog scanner, it doesn't register the touches. Do you know if that is license or hardware issue, or both?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Matthew D. Hoedeman 7 months ago in reply to WilliamL

I'm 100% Renishaw here.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Evan Fink 7 months ago in reply to Matthew D. Hoedeman

Thanks Matthew! I didn't know about the legacy attachments. It fits and sits no problem.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel