hexagon logo
Register Sign in
  • Replies 12 replies
  • Subscribers 227 subscribers
  • Views 1591 views
  • Users 0 members are here
Options
Related

PC-Dmis Crashes when using "to point" with auto features

Ncogneto

We just "upgraded" to 2024.1 SP4 built # 269. When we use the auto feature for circle or cylinder then select "to points" and try to modify any of the points PC-Dmis crashes. Is anyone else seeing this? example of code to follow. we use this a lot for our "unless otherwise stated general profiles" 

Parents

  •  

    If we "F9" edit any point to add an avoidance move PC Dmis will crash. with or without a CAD model.
    if we delete the constructed feature either a circle or cylinder then try to edit a point PC-Dmis will crash.

    PNT1 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
    THEO/<0,0,0>,<0,1,0>
    ACTL/<0,0,0>,<0,1,0>
    TARG/<0,0,0>,<0,1,0>
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=10,DISTANCE AFTER=10,DIRECTION=ALONG FEATURE VECTOR
    SHOW HITS=NO
    A1 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
    ALIGNMENT/TRANS,XAXIS,PNT1
    ALIGNMENT/TRANS,YAXIS,PNT1
    ALIGNMENT/TRANS,ZAXIS,PNT1
    ALIGNMENT/END
    MODE/DCC
    PNT2 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
    THEO/<-5,-3,0>,<1,0,0>
    ACTL/<-5,-3,0>,<1,0,0>
    TARG/<-5,-3,0>,<1,0,0>
    SNAP=NO
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    AVOIDANCE MOVE=NO
    SHOW HITS=NO
    PNT3 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
    THEO/<0,-3,5>,<0,0,-1>
    ACTL/<0,-3,5>,<0,0,-1>
    TARG/<0,-3,5>,<0,0,-1>
    SNAP=NO
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    AVOIDANCE MOVE=NO
    SHOW HITS=NO
    PNT4 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
    THEO/<5,-3,0>,<-1,0,0>
    ACTL/<5,-3,0>,<-1,0,0>
    TARG/<5,-3,0>,<-1,0,0>
    SNAP=NO
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    AVOIDANCE MOVE=NO
    SHOW HITS=NO
    PNT5 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
    THEO/<0,-3,-5>,<0,0,1>
    ACTL/<0,-3,-5>,<0,0,1>
    TARG/<0,-3,-5>,<0,0,1>
    SNAP=NO
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    AVOIDANCE MOVE=NO
    SHOW HITS=NO
    PNT6 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
    THEO/<0,-2.5,-5>,<0,0,1>
    ACTL/<0,-2.5,-5>,<0,0,1>
    TARG/<0,-2.5,-5>,<0,0,1>
    SNAP=NO
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    AVOIDANCE MOVE=NO
    SHOW HITS=NO
    PNT7 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
    THEO/<5,-2.5,0>,<-1,0,0>
    ACTL/<5,-2.5,0>,<-1,0,0>
    TARG/<5,-2.5,0>,<-1,0,0>
    SNAP=NO
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    AVOIDANCE MOVE=NO
    SHOW HITS=NO
    PNT8 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
    THEO/<0,-2.5,5>,<0,0,-1>
    ACTL/<0,-2.5,5>,<0,0,-1>
    TARG/<0,-2.5,5>,<0,0,-1>
    SNAP=NO
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    AVOIDANCE MOVE=NO
    SHOW HITS=NO
    PNT9 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
    THEO/<-5,-2.5,0>,<1,0,0>
    ACTL/<-5,-2.5,0>,<1,0,0>
    TARG/<-5,-2.5,0>,<1,0,0>
    SNAP=NO
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    AVOIDANCE MOVE=NO
    SHOW HITS=NO
    PNT10 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
    THEO/<-5,-2,0>,<1,0,0>
    ACTL/<-5,-2,0>,<1,0,0>
    TARG/<-5,-2,0>,<1,0,0>
    SNAP=NO
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    AVOIDANCE MOVE=NO
    SHOW HITS=NO
    PNT11 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
    THEO/<0,-2,5>,<0,0,-1>
    ACTL/<0,-2,5>,<0,0,-1>
    TARG/<0,-2,5>,<0,0,-1>
    SNAP=NO
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    AVOIDANCE MOVE=NO
    SHOW HITS=NO
    PNT12 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
    THEO/<5,-2,0>,<-1,0,0>
    ACTL/<5,-2,0>,<-1,0,0>
    TARG/<5,-2,0>,<-1,0,0>
    SNAP=NO
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    AVOIDANCE MOVE=NO
    SHOW HITS=NO
    PNT13 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
    THEO/<0,-2,-5>,<0,0,1>
    ACTL/<0,-2,-5>,<0,0,1>
    TARG/<0,-2,-5>,<0,0,1>
    SNAP=NO
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    AVOIDANCE MOVE=NO
    SHOW HITS=NO
    CYL1 =FEAT/CYLINDER,CARTESIAN,IN,LEAST_SQR,NO
    THEO/<0,-2.5,0>,<0,1,0>,10,1
    ACTL/<0,-2.5,0>,<0,1,0>,10,1
    CONSTR/CYLINDER,BFRE,PNT2,PNT3,PNT4,PNT5,PNT6,PNT7,PNT8,PNT9,PNT10,PNT11,PNT12,PNT13,,

  • in reply to Ncogneto

    This is a bug that was recently fixed (PCD-263190).  The fix will be available in the following builds:

    • PC-DMIS 2023.2 SP12
    • PC-DMIS 2024.1 SP5
    • PC-DMIS 2024.2 SP1
  • in reply to Ncogneto

    None of the service packs I mentioned are available yet, but we're working on it.  I believe 2024.2 SP1 is the next one due for release - hopefully later this week.

  • in reply to Neil Challinor

    Neil is correct, we expect to have 2024.2 SP1 out this week including this fix

Reply Children
© 2025 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement