Running 2023.1
I've got a program that has 2 slots 5.30mm L x 2.20mm W and there is no option in GeoTol for size for slots. When I open the size tolerancing my slots do not show up in the feature list.
Your Products have been synced, click here to refresh
Running 2023.1
I've got a program that has 2 slots 5.30mm L x 2.20mm W and there is no option in GeoTol for size for slots. When I open the size tolerancing my slots do not show up in the feature list.
This is what I ended up doing. What a little PITA to get done but it was simple enough to meets the customer's wants and needs.
TOP_SLOT1 =FEAT/CONTACT/SQUARE SLOT/DEFAULT,CARTESIAN,IN
THEO/<-2,2,9.425>,<0,-1,0>,<0,0,-1>,2.2,5.3
ACTL/<-2,2,9.425>,<0,-1,0>,<0,0,-1>,2.2,5.3
TARG/<-2,2,9.425>,<0,-1,0>,<0,0,-1>
MEAS WIDTH=YES,RADIUS=1.25
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
TOP_SLOT2 =FEAT/CONTACT/SQUARE SLOT/DEFAULT,CARTESIAN,IN
THEO/<-2,6,9.425>,<0,-1,0>,<0,0,-1>,2.2,5.3
ACTL/<-2,6,9.425>,<0,-1,0>,<0,0,-1>,2.2,5.3
TARG/<-2,6,9.425>,<0,-1,0>,<0,0,-1>
MEAS WIDTH=YES,RADIUS=1.25
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
3D_LIN1 =FEAT/LINE,CARTESIAN,UNBOUNDED,YES
THEO/<-2+0,2+0,9.425+0>,<0,1,0>
ACTL/<-2,2,9.425>,<0,1,0>
CONSTR/LINE,BF,3D,TOP_SLOT1,TOP_SLOT2,,
OUTLIER_REMOVAL/OFF,3
FILTER/OFF,WAVELENGTH=0
TOP5_30 =GENERIC/CYLINDER,DEPENDENT,CARTESIAN,IN,$
NOM/XYZ,<-2+0,2+0,9.425+0>,$
MEAS/XYZ,<3D_LIN1.X,3D_LIN1.Y,3D_LIN1.Z>,$
NOM/IJK,<3D_LIN1.I,3D_LIN1.J,3D_LIN1.K>,$
MEAS/IJK,<3D_LIN1.I,3D_LIN1.J,3D_LIN1.K>,$
DIAMETER/5.3,TOP_SLOT1.LENGTH,$
DISTANCE/6,6
TOP2_20 =GENERIC/CYLINDER,DEPENDENT,CARTESIAN,IN,$
NOM/XYZ,<-2+0,2+0,9.425+0>,$
MEAS/XYZ,<3D_LIN1.X,3D_LIN1.Y,3D_LIN1.Z>,$
NOM/IJK,<3D_LIN1.I,3D_LIN1.J,3D_LIN1.K>,$
MEAS/IJK,<3D_LIN1.I,3D_LIN1.J,3D_LIN1.K>,$
DIAMETER/2.2,TOP_SLOT1.DIA,$
DISTANCE/6,6
DIM REF7= LOCATION OF SLOT TOP_SLOT1 UNITS=MM ,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=NONE HALF ANGLE=NO
AX NOMINAL +TOL -TOL MEAS OUTTOL DEV
D 2.200 0.120 0.120 2.200 0.000 0.000 ----#----
L 5.300 0.120 0.120 5.300 0.000 0.000 ----#----
END OF DIMENSION REF7
DIM REF8= LOCATION OF CYLINDER TOP5_30 UNITS=MM ,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=NONE HALF ANGLE=NO
AX NOMINAL +TOL -TOL MEAS OUTTOL DEV
D 5.300 0.120 0.120 5.300 0.000 0.000 ----#----
END OF DIMENSION REF8
DIM REF9= LOCATION OF CYLINDER TOP2_20 UNITS=MM ,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=NONE HALF ANGLE=NO
AX NOMINAL +TOL -TOL MEAS OUTTOL DEV
D 2.200 0.120 0.120 2.200 0.000 0.000 ----#----
END OF DIMENSION REF9
DIM_12A =GEOMETRIC_TOLERANCE/STANDARD=ASME Y14.5,SHOWEXPANDED=YES,
DESCRIPTION=OFF,,
DATUM_MATH=DEFAULT,DISPLAY_COORDS=DRF,
UNITS=MM,OUTPUT=BOTH,ARROWDENSITY=100,
SIZE/NOMINAL=2.2,UPPER TOLERANCE=0.12,LOWER TOLERANCE=0.12,
TOP_SLOT1:
UAME SIZE:2.200,
SEGMENT_1,POSITION,PLANAR,0.125,WIDTH,MMC,A,B,MMB,<size>,__,E,__,
TEXT=OFF,CADGRAPH=OFF,REPORTGRAPH=OFF,MULT=10,
MEASURED:
TOP_SLOT1:0.000,
ADD
DATUMS/REPORTDATUMSIZE=OFF,
B(CYL_B):NOM=8.05,+Tol=0.05,-Tol=0.05,
FEATURES/TOP_SLOT1,,
DIM_12B =GEOMETRIC_TOLERANCE/STANDARD=ASME Y14.5,SHOWEXPANDED=YES,
DESCRIPTION=OFF,,
DATUM_MATH=DEFAULT,DISPLAY_COORDS=DRF,
UNITS=MM,OUTPUT=BOTH,ARROWDENSITY=100,
SIZE/NOMINAL=2.2,UPPER TOLERANCE=0.12,LOWER TOLERANCE=0.12,
BTM_SLOT1:
UAME SIZE:2.200,
SEGMENT_1,POSITION,PLANAR,0.125,WIDTH,MMC,A,B,MMB,<size>,__,E,__,
TEXT=OFF,CADGRAPH=OFF,REPORTGRAPH=OFF,MULT=10,
MEASURED:
BTM_SLOT1:0.000,
ADD
DATUMS/REPORTDATUMSIZE=OFF,
B(CYL_B):NOM=8.05,+Tol=0.05,-Tol=0.05,
FEATURES/BTM_SLOT1,,
DIM_12C =GEOMETRIC_TOLERANCE/STANDARD=ASME Y14.5,SHOWEXPANDED=YES,
DESCRIPTION=OFF,,
DATUM_MATH=DEFAULT,DISPLAY_COORDS=DRF,
UNITS=MM,OUTPUT=BOTH,ARROWDENSITY=100,
SIZE/NOMINAL=2.2,UPPER TOLERANCE=0.12,LOWER TOLERANCE=0.12,
TOP2_20:
UAME SIZE:2.200,
SEGMENT_1,POSITION,DIAMETER,0,MMC,__,E,<dat>,<dat>,
TEXT=OFF,CADGRAPH=OFF,REPORTGRAPH=OFF,MULT=10,
MEASURED:
TOP2_20:0.000,
ADD
FEATURES/TOP2_20,,
DIM_12D =GEOMETRIC_TOLERANCE/STANDARD=ASME Y14.5,SHOWEXPANDED=YES,
DESCRIPTION=OFF,,
DATUM_MATH=DEFAULT,DISPLAY_COORDS=DRF,
UNITS=MM,OUTPUT=BOTH,ARROWDENSITY=100,
SIZE/NOMINAL=2.2,UPPER TOLERANCE=0.12,LOWER TOLERANCE=0.12,
BTM2_20:
UAME SIZE:2.200,
SEGMENT_1,POSITION,DIAMETER,0,MMC,__,E,<dat>,<dat>,
TEXT=OFF,CADGRAPH=OFF,REPORTGRAPH=OFF,MULT=10,
MEASURED:
BTM2_20:0.000,
ADD
FEATURES/BTM2_20,,
$$ NO,
====================================================================
COMMENT/REPT,
Zone J9 - sht2 2X
DIM_12E =GEOMETRIC_TOLERANCE/STANDARD=ASME Y14.5,SHOWEXPANDED=YES,
DESCRIPTION=OFF,,
DATUM_MATH=DEFAULT,DISPLAY_COORDS=DRF,
UNITS=MM,OUTPUT=BOTH,ARROWDENSITY=100,
SIZE/NOMINAL=5.3,UPPER TOLERANCE=0.12,LOWER TOLERANCE=0.12,
TOP_SLOT1:
UAME SIZE:5.300,
SEGMENT_1,POSITION,PLANAR,0.125,LENGTH,MMC,A,B,MMB,<size>,__,E,__,
TEXT=OFF,CADGRAPH=OFF,REPORTGRAPH=OFF,MULT=10,
MEASURED:
TOP_SLOT1:0.000,
ADD
DATUMS/REPORTDATUMSIZE=OFF,
B(CYL_B):NOM=8.05,+Tol=0.05,-Tol=0.05,
FEATURES/TOP_SLOT1,,
DIM_12F =GEOMETRIC_TOLERANCE/STANDARD=ASME Y14.5,SHOWEXPANDED=YES,
DESCRIPTION=OFF,,
DATUM_MATH=DEFAULT,DISPLAY_COORDS=DRF,
UNITS=MM,OUTPUT=BOTH,ARROWDENSITY=100,
SIZE/NOMINAL=5.3,UPPER TOLERANCE=0.12,LOWER TOLERANCE=0.12,
BTM_SLOT1:
UAME SIZE:5.300,
SEGMENT_1,POSITION,PLANAR,0.125,LENGTH,MMC,A,B,MMB,<size>,__,E,__,
TEXT=OFF,CADGRAPH=OFF,REPORTGRAPH=OFF,MULT=10,
MEASURED:
BTM_SLOT1:0.000,
ADD
DATUMS/REPORTDATUMSIZE=OFF,
B(CYL_B):NOM=8.05,+Tol=0.05,-Tol=0.05,
FEATURES/BTM_SLOT1,,
DIM_12G =GEOMETRIC_TOLERANCE/STANDARD=ASME Y14.5,SHOWEXPANDED=YES,
DESCRIPTION=OFF,,
DATUM_MATH=DEFAULT,DISPLAY_COORDS=DRF,
UNITS=MM,OUTPUT=BOTH,ARROWDENSITY=100,
SIZE/NOMINAL=5.3,UPPER TOLERANCE=0.12,LOWER TOLERANCE=0.12,
TOP5_30:
UAME SIZE:5.300,
SEGMENT_1,POSITION,DIAMETER,0,MMC,__,E,<dat>,<dat>,
TEXT=OFF,CADGRAPH=OFF,REPORTGRAPH=OFF,MULT=10,
MEASURED:
TOP5_30:0.000,
ADD
FEATURES/TOP5_30,,
DIM_12H =GEOMETRIC_TOLERANCE/STANDARD=ASME Y14.5,SHOWEXPANDED=YES,
DESCRIPTION=OFF,,
DATUM_MATH=DEFAULT,DISPLAY_COORDS=DRF,
UNITS=MM,OUTPUT=BOTH,ARROWDENSITY=100,
SIZE/NOMINAL=5.3,UPPER TOLERANCE=0.12,LOWER TOLERANCE=0.12,
BTM5_30:
UAME SIZE:5.300,
SEGMENT_1,POSITION,DIAMETER,0,MMC,__,E,<dat>,<dat>,
TEXT=OFF,CADGRAPH=OFF,REPORTGRAPH=OFF,MULT=10,
MEASURED:
BTM5_30:0.000,
ADD
FEATURES/BTM5_30,,This is what I ended up doing. What a little PITA to get done but it was simple enough to meets the customer's wants and needs.
TOP_SLOT1 =FEAT/CONTACT/SQUARE SLOT/DEFAULT,CARTESIAN,IN
THEO/<-2,2,9.425>,<0,-1,0>,<0,0,-1>,2.2,5.3
ACTL/<-2,2,9.425>,<0,-1,0>,<0,0,-1>,2.2,5.3
TARG/<-2,2,9.425>,<0,-1,0>,<0,0,-1>
MEAS WIDTH=YES,RADIUS=1.25
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
TOP_SLOT2 =FEAT/CONTACT/SQUARE SLOT/DEFAULT,CARTESIAN,IN
THEO/<-2,6,9.425>,<0,-1,0>,<0,0,-1>,2.2,5.3
ACTL/<-2,6,9.425>,<0,-1,0>,<0,0,-1>,2.2,5.3
TARG/<-2,6,9.425>,<0,-1,0>,<0,0,-1>
MEAS WIDTH=YES,RADIUS=1.25
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
3D_LIN1 =FEAT/LINE,CARTESIAN,UNBOUNDED,YES
THEO/<-2+0,2+0,9.425+0>,<0,1,0>
ACTL/<-2,2,9.425>,<0,1,0>
CONSTR/LINE,BF,3D,TOP_SLOT1,TOP_SLOT2,,
OUTLIER_REMOVAL/OFF,3
FILTER/OFF,WAVELENGTH=0
TOP5_30 =GENERIC/CYLINDER,DEPENDENT,CARTESIAN,IN,$
NOM/XYZ,<-2+0,2+0,9.425+0>,$
MEAS/XYZ,<3D_LIN1.X,3D_LIN1.Y,3D_LIN1.Z>,$
NOM/IJK,<3D_LIN1.I,3D_LIN1.J,3D_LIN1.K>,$
MEAS/IJK,<3D_LIN1.I,3D_LIN1.J,3D_LIN1.K>,$
DIAMETER/5.3,TOP_SLOT1.LENGTH,$
DISTANCE/6,6
TOP2_20 =GENERIC/CYLINDER,DEPENDENT,CARTESIAN,IN,$
NOM/XYZ,<-2+0,2+0,9.425+0>,$
MEAS/XYZ,<3D_LIN1.X,3D_LIN1.Y,3D_LIN1.Z>,$
NOM/IJK,<3D_LIN1.I,3D_LIN1.J,3D_LIN1.K>,$
MEAS/IJK,<3D_LIN1.I,3D_LIN1.J,3D_LIN1.K>,$
DIAMETER/2.2,TOP_SLOT1.DIA,$
DISTANCE/6,6
DIM REF7= LOCATION OF SLOT TOP_SLOT1 UNITS=MM ,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=NONE HALF ANGLE=NO
AX NOMINAL +TOL -TOL MEAS OUTTOL DEV
D 2.200 0.120 0.120 2.200 0.000 0.000 ----#----
L 5.300 0.120 0.120 5.300 0.000 0.000 ----#----
END OF DIMENSION REF7
DIM REF8= LOCATION OF CYLINDER TOP5_30 UNITS=MM ,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=NONE HALF ANGLE=NO
AX NOMINAL +TOL -TOL MEAS OUTTOL DEV
D 5.300 0.120 0.120 5.300 0.000 0.000 ----#----
END OF DIMENSION REF8
DIM REF9= LOCATION OF CYLINDER TOP2_20 UNITS=MM ,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=NONE HALF ANGLE=NO
AX NOMINAL +TOL -TOL MEAS OUTTOL DEV
D 2.200 0.120 0.120 2.200 0.000 0.000 ----#----
END OF DIMENSION REF9
DIM_12A =GEOMETRIC_TOLERANCE/STANDARD=ASME Y14.5,SHOWEXPANDED=YES,
DESCRIPTION=OFF,,
DATUM_MATH=DEFAULT,DISPLAY_COORDS=DRF,
UNITS=MM,OUTPUT=BOTH,ARROWDENSITY=100,
SIZE/NOMINAL=2.2,UPPER TOLERANCE=0.12,LOWER TOLERANCE=0.12,
TOP_SLOT1:
UAME SIZE:2.200,
SEGMENT_1,POSITION,PLANAR,0.125,WIDTH,MMC,A,B,MMB,<size>,__,E,__,
TEXT=OFF,CADGRAPH=OFF,REPORTGRAPH=OFF,MULT=10,
MEASURED:
TOP_SLOT1:0.000,
ADD
DATUMS/REPORTDATUMSIZE=OFF,
B(CYL_B):NOM=8.05,+Tol=0.05,-Tol=0.05,
FEATURES/TOP_SLOT1,,
DIM_12B =GEOMETRIC_TOLERANCE/STANDARD=ASME Y14.5,SHOWEXPANDED=YES,
DESCRIPTION=OFF,,
DATUM_MATH=DEFAULT,DISPLAY_COORDS=DRF,
UNITS=MM,OUTPUT=BOTH,ARROWDENSITY=100,
SIZE/NOMINAL=2.2,UPPER TOLERANCE=0.12,LOWER TOLERANCE=0.12,
BTM_SLOT1:
UAME SIZE:2.200,
SEGMENT_1,POSITION,PLANAR,0.125,WIDTH,MMC,A,B,MMB,<size>,__,E,__,
TEXT=OFF,CADGRAPH=OFF,REPORTGRAPH=OFF,MULT=10,
MEASURED:
BTM_SLOT1:0.000,
ADD
DATUMS/REPORTDATUMSIZE=OFF,
B(CYL_B):NOM=8.05,+Tol=0.05,-Tol=0.05,
FEATURES/BTM_SLOT1,,
DIM_12C =GEOMETRIC_TOLERANCE/STANDARD=ASME Y14.5,SHOWEXPANDED=YES,
DESCRIPTION=OFF,,
DATUM_MATH=DEFAULT,DISPLAY_COORDS=DRF,
UNITS=MM,OUTPUT=BOTH,ARROWDENSITY=100,
SIZE/NOMINAL=2.2,UPPER TOLERANCE=0.12,LOWER TOLERANCE=0.12,
TOP2_20:
UAME SIZE:2.200,
SEGMENT_1,POSITION,DIAMETER,0,MMC,__,E,<dat>,<dat>,
TEXT=OFF,CADGRAPH=OFF,REPORTGRAPH=OFF,MULT=10,
MEASURED:
TOP2_20:0.000,
ADD
FEATURES/TOP2_20,,
DIM_12D =GEOMETRIC_TOLERANCE/STANDARD=ASME Y14.5,SHOWEXPANDED=YES,
DESCRIPTION=OFF,,
DATUM_MATH=DEFAULT,DISPLAY_COORDS=DRF,
UNITS=MM,OUTPUT=BOTH,ARROWDENSITY=100,
SIZE/NOMINAL=2.2,UPPER TOLERANCE=0.12,LOWER TOLERANCE=0.12,
BTM2_20:
UAME SIZE:2.200,
SEGMENT_1,POSITION,DIAMETER,0,MMC,__,E,<dat>,<dat>,
TEXT=OFF,CADGRAPH=OFF,REPORTGRAPH=OFF,MULT=10,
MEASURED:
BTM2_20:0.000,
ADD
FEATURES/BTM2_20,,
$$ NO,
====================================================================
COMMENT/REPT,
Zone J9 - sht2 2X
DIM_12E =GEOMETRIC_TOLERANCE/STANDARD=ASME Y14.5,SHOWEXPANDED=YES,
DESCRIPTION=OFF,,
DATUM_MATH=DEFAULT,DISPLAY_COORDS=DRF,
UNITS=MM,OUTPUT=BOTH,ARROWDENSITY=100,
SIZE/NOMINAL=5.3,UPPER TOLERANCE=0.12,LOWER TOLERANCE=0.12,
TOP_SLOT1:
UAME SIZE:5.300,
SEGMENT_1,POSITION,PLANAR,0.125,LENGTH,MMC,A,B,MMB,<size>,__,E,__,
TEXT=OFF,CADGRAPH=OFF,REPORTGRAPH=OFF,MULT=10,
MEASURED:
TOP_SLOT1:0.000,
ADD
DATUMS/REPORTDATUMSIZE=OFF,
B(CYL_B):NOM=8.05,+Tol=0.05,-Tol=0.05,
FEATURES/TOP_SLOT1,,
DIM_12F =GEOMETRIC_TOLERANCE/STANDARD=ASME Y14.5,SHOWEXPANDED=YES,
DESCRIPTION=OFF,,
DATUM_MATH=DEFAULT,DISPLAY_COORDS=DRF,
UNITS=MM,OUTPUT=BOTH,ARROWDENSITY=100,
SIZE/NOMINAL=5.3,UPPER TOLERANCE=0.12,LOWER TOLERANCE=0.12,
BTM_SLOT1:
UAME SIZE:5.300,
SEGMENT_1,POSITION,PLANAR,0.125,LENGTH,MMC,A,B,MMB,<size>,__,E,__,
TEXT=OFF,CADGRAPH=OFF,REPORTGRAPH=OFF,MULT=10,
MEASURED:
BTM_SLOT1:0.000,
ADD
DATUMS/REPORTDATUMSIZE=OFF,
B(CYL_B):NOM=8.05,+Tol=0.05,-Tol=0.05,
FEATURES/BTM_SLOT1,,
DIM_12G =GEOMETRIC_TOLERANCE/STANDARD=ASME Y14.5,SHOWEXPANDED=YES,
DESCRIPTION=OFF,,
DATUM_MATH=DEFAULT,DISPLAY_COORDS=DRF,
UNITS=MM,OUTPUT=BOTH,ARROWDENSITY=100,
SIZE/NOMINAL=5.3,UPPER TOLERANCE=0.12,LOWER TOLERANCE=0.12,
TOP5_30:
UAME SIZE:5.300,
SEGMENT_1,POSITION,DIAMETER,0,MMC,__,E,<dat>,<dat>,
TEXT=OFF,CADGRAPH=OFF,REPORTGRAPH=OFF,MULT=10,
MEASURED:
TOP5_30:0.000,
ADD
FEATURES/TOP5_30,,
DIM_12H =GEOMETRIC_TOLERANCE/STANDARD=ASME Y14.5,SHOWEXPANDED=YES,
DESCRIPTION=OFF,,
DATUM_MATH=DEFAULT,DISPLAY_COORDS=DRF,
UNITS=MM,OUTPUT=BOTH,ARROWDENSITY=100,
SIZE/NOMINAL=5.3,UPPER TOLERANCE=0.12,LOWER TOLERANCE=0.12,
BTM5_30:
UAME SIZE:5.300,
SEGMENT_1,POSITION,DIAMETER,0,MMC,__,E,<dat>,<dat>,
TEXT=OFF,CADGRAPH=OFF,REPORTGRAPH=OFF,MULT=10,
MEASURED:
BTM5_30:0.000,
ADD
FEATURES/BTM5_30,,| © 2025 Hexagon AB and/or its subsidiaries. | Privacy Policy | Cloud Services Agreement |