Understanding command format

Hello everyone:

I am using pcdmis pro 2010mr3 with a romer multigage mg380. Lately i have noticed there is a d=.0002 in my hit data

hit/basic,normal,d=0.0002,<10.7796 etc.

I have searched through the help files and cannot find its description, i cant even see it in summary view.

If i had to guess i would say it is form error from poor calibration.

Any help would be appreciated

Can you paste a copy of the code of your program for this section?

here is a small example
PART NAME : 400 Oil Head
REV NUMBER :
SER NUMBER :
STATS COUNT : 1

STARTUP =ALIGNMENT/START,RECALL:,LIST=YES
ALIGNMENT/END
MODE/MANUAL
LOADPROBE/6MM
TIP/TIP1, SHANKIJK=0, 0, 1, ANGLE=0
PLN1 =FEAT/PLANE,CARTESIAN,TRIANGLE
THEO/<-1.4044,16.8249,-5.8047>,<-0.000977,0.0002898,0.9999995>
ACTL/<-1.4044,16.8249,-5.8047>,<-0.000977,0.0002898,0.9999995>
MEAS/PLANE,4
HIT/BASIC,NORMAL,D=-0.0001,<0.6005,17.6704,-5.8031>,<-0.000977,0.0002898,0.9999995>,<0.6005,17.6704,-5.8031>,USE THEO=YES
HIT/BASIC,NORMAL,D=0.0001,<-2.6856,18.6407,-5.8064>,<-0.000977,0.0002898,0.9999995>,<-2.6856,18.6407,-5.8064>,USE THEO=YES
HIT/BASIC,NORMAL,D=-0.0001,<-3.4451,15.9387,-5.8066>,<-0.000977,0.0002898,0.9999995>,<-3.4451,15.9387,-5.8066>,USE THEO=YES
HIT/BASIC,NORMAL,D=0.0001,<-0.0874,15.0496,-5.8028>,<-0.000977,0.0002898,0.9999995>,<-0.0874,15.0496,-5.8028>,USE THEO=YES
ENDMEAS/
A1 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
ALIGNMENT/LEVEL,ZPLUS,PLN1
ALIGNMENT/END
CIR1 =FEAT/CIRCLE,CARTESIAN,IN,LEAST_SQR
THEO/<0.2488,14.4089,-5.7985>,<0,0,1>,1.2418
ACTL/<0.2488,14.4089,-5.7985>,<0,0,1>,1.2418
MEAS/CIRCLE,4,FEATURE=PLN1
HIT/BASIC,NORMAL,D=0.0001,<0.05,13.8575,-6.4635>,<0.3253371,0.9455981,0>,<0.0459,13.822,-6.3798>,USE THEO=YES
HIT/BASIC,NORMAL,D=-0.0001,<0.7946,14.3196,-6.4593>,<-0.9934334,0.114412,0>,<0.8614,14.3088,-6.3525>,USE THEO=YES
HIT/BASIC,NORMAL,D=0.0001,<0.3096,14.9483,-6.6661>,<-0.137861,-0.9904516,0>,<0.3081,15.027,-6.5554>,USE THEO=YES
HIT/BASIC,NORMAL,D=-0.0001,<-0.3257,14.3267,-6.5871>,<0.9946151,0.1036376,0>,<-0.3679,14.3372,-6.4982>,USE THEO=YES
ENDMEAS/