Your Products have been synced, click here to refresh
I have been trying to do this without success for quite some time. Mind you, this has been with my current version 3.7mr3.
What I have been doing for a while now is to measure my part, then when its done, do the following;
i) go to Insert / Report Command / Dimension Info, then select the features I wish to report and rotate the view as required.
ii) I then use some method to do a screen capture (we have a program called "Snagit") and resize / trim the screen capture.
iii) Last, I copy and paste into an excel sheet.
iv) I have multiple views with all of my pertinent information.
For us, this is actually the way one of our customers wants to see their reports. A little tedious but it works.
Hope this helps you somewhat.
I have been trying to do this without success for quite some time. Mind you, this has been with my current version 3.7mr3.
What I have been doing for a while now is to measure my part, then when its done, do the following;
i) go to Insert / Report Command / Dimension Info, then select the features I wish to report and rotate the view as required.
ii) I then use some method to do a screen capture (we have a program called "Snagit") and resize / trim the screen capture.
iii) Last, I copy and paste into an excel sheet.
iv) I have multiple views with all of my pertinent information.
For us, this is actually the way one of our customers wants to see their reports. A little tedious but it works.
Hope this helps you somewhat.
© 2024 Hexagon AB and/or its subsidiaries. | Privacy Policy | Cloud Services Agreement |