PC DMIS Crash all the time?

We just purchased a Romer Arm 7525 and I've been feeling my way in the dark for the past couple of days. I haven't had the training yet, next class is full and won't be another until December?!?... Anyhow, that's a different issue.

I've had success pulling in CAD's, running alignments(starting to wrap my head around it, but I think a lot has been luck), but the real problem I'm running into is PC DMIS crashing several times a day. Can it sense I don't know what I'm doing? This thing may be smarter than I thought...

Situations where it crashes: manual alignment to part without CAD (3 times in a row, measured plane, taking hits on circle, on third hit it crashed)
Many other times, don't know enough about what I did to lead to the crash...

Anybody experience this? Suggestions?

Parents

Matthew D. Hoedeman over 12 years ago

Most likely, you're putting corrupt code in the program, and it's choking on it.

Suggestion...go to class. I know that classes are held weekly, throughout the US. If your company is willing to pay for a plane/hotel, you could be in class tomorrow!

If he needs the Romer/Reshaper class, it is ONLY held in NC and one facility. We are looking at the 7525 here as well and that is what we've been told for training. ONE location and one only.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

Matthew D. Hoedeman over 12 years ago

Most likely, you're putting corrupt code in the program, and it's choking on it.

Suggestion...go to class. I know that classes are held weekly, throughout the US. If your company is willing to pay for a plane/hotel, you could be in class tomorrow!

If he needs the Romer/Reshaper class, it is ONLY held in NC and one facility. We are looking at the 7525 here as well and that is what we've been told for training. ONE location and one only.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

No Data