I am running PC-DMIS CADD++, 2010MR3 on a Infinite 2.0 Romer. When I run a program with dimensions in it I get the following error. If I delete the dimensions it will run and not get the error and then I would have to redo the dimensions. Does anyone know why? I never had this problem before. Could there be a setting which got change that causes this? Thanks for the help!
It is possible the report template you are using was modified in some way that created a problem.
It is possible the program you are using has corrupted internal report template data. Select 'File - Reporting - Clear template associated data' and see if this helps.
If you have more than one version of PC-DMIS installed you may need to re-register the OCX controls that are included in PC-DMIS (look in the installation folder of PC-DMIS and you will see a number of files with an OCX extension).
- Start - Run - cmd.exe (this will open a command prompt window)
- Enter the following commands (ignore comments in braces):
C: (this will make sure you are on 'C' drive. The command prompt may be defaulted to some other drive)
CD C:\Program files\wai\pc-dmis 2010 (this will change the current directory to the location where PC-DMIS is installed. Adjust the path as needed)
REGSVR32 <name of file with ocx extension> (example: REGSVR32 PCDMISREPORTINGCONTROLS.OCX)
- Repeat the 'REGSVR32' command for all of the OCX files in the PC-DMIS directory.
If the command prompt is not your thing you can download a batch file to do this for you from here:
ftp://ftp.wilcoxassoc.com/Utilities/register_ocx.zip You may need to edit the file to suit the version of PC-DMIS you are using (maybe there are more OCX files then it was written for).
It is possible the report template you are using was modified in some way that created a problem.
It is possible the program you are using has corrupted internal report template data. Select 'File - Reporting - Clear template associated data' and see if this helps.
If you have more than one version of PC-DMIS installed you may need to re-register the OCX controls that are included in PC-DMIS (look in the installation folder of PC-DMIS and you will see a number of files with an OCX extension).
- Start - Run - cmd.exe (this will open a command prompt window)
- Enter the following commands (ignore comments in braces):
C: (this will make sure you are on 'C' drive. The command prompt may be defaulted to some other drive)
CD C:\Program files\wai\pc-dmis 2010 (this will change the current directory to the location where PC-DMIS is installed. Adjust the path as needed)
REGSVR32 <name of file with ocx extension> (example: REGSVR32 PCDMISREPORTINGCONTROLS.OCX)
- Repeat the 'REGSVR32' command for all of the OCX files in the PC-DMIS directory.
If the command prompt is not your thing you can download a batch file to do this for you from here:
ftp://ftp.wilcoxassoc.com/Utilities/register_ocx.zip You may need to edit the file to suit the version of PC-DMIS you are using (maybe there are more OCX files then it was written for).