Creating a point

As you can see from the attached marked up print, I need to measure the outside intersection point of two cylinders. Right now, I have it programmed to offset a line from the center of the cylinder to the outside of the cylinder by .5" which is the nominal radius of the tubing. The problem I run into with that method is that the dimensions apply after the part is powder coated, so the powder coating could make the radius of the part grow up to .575". So after the program is run, I go back and edit the constructed offset line by changing the offset distance to what the radius of the tube measures after the part is powder coated.

Is there an easier way to do this using code of some sort to offset the line by 1/2 of the diameter of the cylinder instead of using an exact number? That way if the cylinder grows the code will account for that in the program.

PS I am horrible at editing code, so if that is the best way please walk me through it step by step.

Greatly appreciated!

Attached Files

Parents

counterpart5 over 10 years ago

This is literally the first time I have operated in command mode, I usually operate in summary mode. So for me looking at the above posts does not help me at all, although I truly appreciate you guys trying to help. Attached is my code, where in the code do I edit it and what do I edit it to?

CYL1       =FEAT/CYLINDER,CARTESIAN,OUT,LEAST_SQR
            THEO/<-0.7361,7.7375,8.0555>,<0,-1,0>,1,5.584
            ACTL/<-0.7361,7.7375,8.0555>,<0,-1,0>,1,5.584
            MEAS/CYLINDER,9
            HIT/BASIC,NORMAL,<-1.1811,10.524,8.2835>,<-0.8899598,0,0.456039>,<-1.1811,10.524,8.2835>,USE THEO=YES
            HIT/BASIC,NORMAL,<-0.7416,10.4937,8.5554>,<-0.011033,0,0.9999391>,<-0.7416,10.4937,8.5554>,USE THEO=YES
            HIT/BASIC,NORMAL,<-0.31,10.5295,8.3171>,<0.8521661,0,0.5232713>,<-0.31,10.5295,8.3171>,USE THEO=YES
            HIT/BASIC,NORMAL,<-1.2153,7.4413,8.1983>,<-0.9583279,0,0.2856704>,<-1.2153,7.4413,8.1983>,USE THEO=YES
            HIT/BASIC,NORMAL,<-0.8372,7.3726,8.5451>,<-0.2021788,0,0.9793486>,<-0.8372,7.3726,8.5451>,USE THEO=YES
            HIT/BASIC,NORMAL,<-0.3178,7.3569,8.3293>,<0.8366638,0,0.5477168>,<-0.3178,7.3569,8.3293>,USE THEO=YES
            HIT/BASIC,NORMAL,<-1.1739,4.9663,8.297>,<-0.8755613,0,0.4831071>,<-1.1739,4.9663,8.297>,USE THEO=YES
            HIT/BASIC,NORMAL,<-0.7084,4.9455,8.5547>,<0.0554071,0,0.9984638>,<-0.7084,4.9455,8.5547>,USE THEO=YES
            HIT/BASIC,NORMAL,<-0.3403,4.9558,8.361>,<0.7915692,0,0.6110795>,<-0.3403,4.9558,8.361>,USE THEO=YES
            ENDMEAS/
CYL2       =FEAT/CYLINDER,CARTESIAN,OUT,LEAST_SQR
            THEO/<3.5812,4.2473,8.0555>,<1,0,0>,1,6.9239
            ACTL/<3.5812,4.2473,8.0555>,<1,0,0>,1,6.9239
            MEAS/CYLINDER,9
            HIT/BASIC,NORMAL,<0.1193,3.8274,8.327>,<0,-0.8397228,0.5430154>,<0.1193,3.8274,8.327>,USE THEO=YES
            HIT/BASIC,NORMAL,<0.2176,4.3281,8.5489>,<0,0.1616868,0.9868421>,<0.2176,4.3281,8.5489>,USE THEO=YES
            HIT/BASIC,NORMAL,<0.1919,4.6483,8.3541>,<0,0.802079,0.5972179>,<0.1919,4.6483,8.3541>,USE THEO=YES
            HIT/BASIC,NORMAL,<3.6438,3.8189,8.3134>,<0,-0.8567188,0.5157838>,<3.6438,3.8189,8.3134>,USE THEO=YES
            HIT/BASIC,NORMAL,<3.6435,4.3112,8.5514>,<0,0.1278558,0.9917928>,<3.6435,4.3112,8.5514>,USE THEO=YES
            HIT/BASIC,NORMAL,<3.6194,4.6803,8.3055>,<0,0.8660251,0.5000005>,<3.6194,4.6803,8.3055>,USE THEO=YES
            HIT/BASIC,NORMAL,<6.9993,3.8531,8.3631>,<0,-0.7883187,0.6152671>,<6.9993,3.8531,8.3631>,USE THEO=YES
            HIT/BASIC,NORMAL,<7.0331,4.4295,8.5211>,<0,0.3645109,0.9311991>,<7.0331,4.4295,8.5211>,USE THEO=YES
            HIT/BASIC,NORMAL,<7.0431,4.6637,8.3322>,<0,0.8328943,0.5534321>,<7.0431,4.6637,8.3322>,USE THEO=YES
            ENDMEAS/
CYL3       =FEAT/CYLINDER,CARTESIAN,IN,LEAST_SQR
            THEO/<0,5.877,0.0111>,<0,0,-1>,0.406,0.8635
            ACTL/<0,5.877,0.0111>,<0,0,-1>,0.406,0.8635
            MEAS/CYLINDER,12
            HIT/BASIC,NORMAL,<-0.1886,5.9521,0.3776>,<0.9291144,-0.3697923,0>,<-0.1886,5.9521,0.3776>,USE THEO=YES
            HIT/BASIC,NORMAL,<-0.1767,5.7771,0.3736>,<0.8705747,0.4920362,0>,<-0.1767,5.7771,0.3736>,USE THEO=YES
            HIT/BASIC,NORMAL,<0.0464,5.6794,0.4033>,<-0.2283501,0.9735791,0>,<0.0464,5.6794,0.4033>,USE THEO=YES
            HIT/BASIC,NORMAL,<0.1897,5.8048,0.3373>,<-0.9347062,0.3554213,0>,<0.1897,5.8048,0.3373>,USE THEO=YES
            HIT/BASIC,NORMAL,<0.1546,6.0085,0.4428>,<-0.7616414,-0.6479988,0>,<0.1546,6.0085,0.4428>,USE THEO=YES
            HIT/BASIC,NORMAL,<-0.0173,6.0793,0.435>,<0.0853693,-0.9963494,0>,<-0.0173,6.0793,0.435>,USE THEO=YES
            HIT/BASIC,NORMAL,<0.0134,6.0796,-0.4204>,<-0.0658408,-0.9978301,0>,<0.0134,6.0796,-0.4204>,USE THEO=YES
            HIT/BASIC,NORMAL,<0.1639,5.9968,-0.4101>,<-0.8074171,-0.589981,0>,<0.1639,5.9968,-0.4101>,USE THEO=YES
            HIT/BASIC,NORMAL,<0.1976,5.8303,-0.3617>,<-0.9731685,0.2300936,0>,<0.1976,5.8303,-0.3617>,USE THEO=YES
            HIT/BASIC,NORMAL,<0.1196,5.713,-0.3997>,<-0.5892573,0.8079454,0>,<0.1196,5.713,-0.3997>,USE THEO=YES
            HIT/BASIC,NORMAL,<-0.0375,5.6775,-0.4206>,<0.1845342,0.9828261,0>,<-0.0375,5.6775,-0.4206>,USE THEO=YES
            HIT/BASIC,NORMAL,<-0.1828,5.7888,-0.3428>,<0.9006852,0.4344724,0>,<-0.1828,5.7888,-0.3428>,USE THEO=YES
            ENDMEAS/
LIN1       =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
            THEO/<0.8554,0,0>,<1,0,0>
            ACTL/<0.8554,0,0>,<1,0,0>
            CONSTR/LINE,CAST,CYL2,6.9239,DEPENDENT
LIN2       =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
            THEO/<9.6619,0.626,0>,<0.7071068,0.7071068,0>
            ACTL/<9.6619,0.626,0>,<0.7071068,0.7071068,0>
            CONSTR/LINE,CAST,CYL4,16.1386,DEPENDENT
PNT1       =FEAT/POINT,CARTESIAN,NO
            THEO/<0,0,0>,<0,-1,0>
            ACTL/<0,0,0>,<0,-1,0>
            CONSTR/POINT,INT,CYL1,CYL2
PNT2       =FEAT/POINT,CARTESIAN,NO
            THEO/<9.0359,0,0>,<1,0,0>
            ACTL/<9.0359,0,0>,<1,0,0>
            CONSTR/POINT,INT,CYL2,CYL4
            COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO,
            Measure diameter of tube and enter the radius for LIN4 & LIN5, and then update the line and update dimensions G.
PNT3       =FEAT/POINT,CARTESIAN,YES
            THEO/<21.9759,12.94,0>,<0.7071068,0.7071068,0>
            ACTL/<21.9759,12.94,0>,<0.7071068,0.7071068,0>
            CONSTR/POINT,PIERCE,CYL4,PLN3
LIN5       =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
            THEO/<0,-0.5,0>,<1,0,0>
            ACTL/<0,-0.5,0>,<1,0,0>
            CONSTR/LINE,OFFSET
            SURFACE NORMAL = <0,0,1>,MULTI POINT
            ID = PNT1,PNT2,,
            OFFSET = -0.5,-0.5
A3         =ALIGNMENT/START,RECALL:A2,LIST=YES
            ALIGNMENT/LEVEL,XPLUS,CYL4
            ALIGNMENT/ROTATE,YMINUS,TO,CYL2,ABOUT,XPLUS
            ALIGNMENT/TRANS,XAXIS,PNT2
            ALIGNMENT/TRANS,YAXIS,PNT2
            ALIGNMENT/TRANS,ZAXIS,PNT2
            ALIGNMENT/END
LIN4       =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
            THEO/<18.2999,-0.5,0>,<-1,0,0>
            ACTL/<18.2999,-0.5,0>,<-1,0,0>
            CONSTR/LINE,OFFSET
            SURFACE NORMAL = <0,0,1>,MULTI POINT
            ID = PNT3,PNT2,,
            OFFSET = 0.5,0.5
            RECALL/ALIGNMENT,INTERNAL,A2
PNT4       =FEAT/POINT,CARTESIAN,YES
            THEO/<9.243,-0.5,0>,<-0.7071068,-0.7071068,0>
            ACTL/<9.243,-0.5,0>,<-0.7071068,-0.7071068,0>
            CONSTR/POINT,INT,LIN4,LIN5
PNT5       =FEAT/POINT,CARTESIAN,NO
            THEO/<22.683,12.94,0>,<-0.7071068,-0.7071068,0>
            ACTL/<22.683,12.94,0>,<-0.7071068,-0.7071068,0>
            CONSTR/POINT,PIERCE,PLN3,LIN4
CIR1       =FEAT/CIRCLE,CARTESIAN,IN,LEAST_SQR
            THEO/<0,-0.4152,0>,<0,1,0>,0.406
            ACTL/<0,-0.4152,0>,<0,1,0>,0.406
            MEAS/CIRCLE,4,YPLUS
            HIT/BASIC,NORMAL,D=0,<-0.0554,-0.3784,0.1953>,<0.2728286,0,-0.9620627>,<-0.0554,-0.3784,0.1953>,USE THEO=YES
            HIT/BASIC,NORMAL,D=0,<0.1297,-0.4028,0.1561>,<-0.6390642,0,-0.7691534>,<0.1297,-0.4028,0.1561>,USE THEO=YES
            HIT/BASIC,NORMAL,D=0,<0.1566,-0.4366,-0.1291>,<-0.771526,0,0.6361978>,<0.1566,-0.4366,-0.1291>,USE THEO=YES
            HIT/BASIC,NORMAL,D=0,<-0.2017,-0.443,-0.023>,<0.9935587,0,0.1133187>,<-0.2017,-0.443,-0.023>,USE THEO=YES
            ENDMEAS/
CYL5       =FEAT/CYLINDER,CARTESIAN,IN,LEAST_SQR
            THEO/<25.275,13.0625,0>,<0,1,0>,0.34,0.1999
            ACTL/<25.275,13.0625,0>,<0,1,0>,0.34,0.1999
            MEAS/CYLINDER,8
            HIT/BASIC,NORMAL,<25.2294,12.9899,-0.1638>,<0.2682381,0,0.9633526>,<25.2294,12.9899,-0.1638>,USE THEO=YES
            HIT/BASIC,NORMAL,<25.4443,13.0114,-0.0155>,<-0.9958558,0,0.0909458>,<25.4443,13.0114,-0.0155>,USE THEO=YES
            HIT/BASIC,NORMAL,<25.4021,12.9939,0.1129>,<-0.7476551,0,-0.6640872>,<25.4021,12.9939,0.1129>,USE THEO=YES
            HIT/BASIC,NORMAL,<25.1118,12.9626,0.0475>,<0.9600935,0,-0.2796791>,<25.1118,12.9626,0.0475>,USE THEO=YES
            HIT/BASIC,NORMAL,<25.2391,13.1536,-0.1662>,<0.2114272,0,0.9773937>,<25.2391,13.1536,-0.1662>,USE THEO=YES
            HIT/BASIC,NORMAL,<25.438,13.1568,0.0483>,<-0.9587467,0,-0.2842619>,<25.438,13.1568,0.0483>,USE THEO=YES
            HIT/BASIC,NORMAL,<25.3361,13.1543,0.1586>,<-0.3592813,0,-0.9332293>,<25.3361,13.1543,0.1586>,USE THEO=YES
            HIT/BASIC,NORMAL,<25.1107,13.1625,0.0438>,<0.9662524,0,-0.2575973>,<25.1107,13.1625,0.0438>,USE THEO=YES
            ENDMEAS/

Reply

counterpart5 over 10 years ago

CYL1       =FEAT/CYLINDER,CARTESIAN,OUT,LEAST_SQR
            THEO/<-0.7361,7.7375,8.0555>,<0,-1,0>,1,5.584
            ACTL/<-0.7361,7.7375,8.0555>,<0,-1,0>,1,5.584
            MEAS/CYLINDER,9
            HIT/BASIC,NORMAL,<-1.1811,10.524,8.2835>,<-0.8899598,0,0.456039>,<-1.1811,10.524,8.2835>,USE THEO=YES
            HIT/BASIC,NORMAL,<-0.7416,10.4937,8.5554>,<-0.011033,0,0.9999391>,<-0.7416,10.4937,8.5554>,USE THEO=YES
            HIT/BASIC,NORMAL,<-0.31,10.5295,8.3171>,<0.8521661,0,0.5232713>,<-0.31,10.5295,8.3171>,USE THEO=YES
            HIT/BASIC,NORMAL,<-1.2153,7.4413,8.1983>,<-0.9583279,0,0.2856704>,<-1.2153,7.4413,8.1983>,USE THEO=YES
            HIT/BASIC,NORMAL,<-0.8372,7.3726,8.5451>,<-0.2021788,0,0.9793486>,<-0.8372,7.3726,8.5451>,USE THEO=YES
            HIT/BASIC,NORMAL,<-0.3178,7.3569,8.3293>,<0.8366638,0,0.5477168>,<-0.3178,7.3569,8.3293>,USE THEO=YES
            HIT/BASIC,NORMAL,<-1.1739,4.9663,8.297>,<-0.8755613,0,0.4831071>,<-1.1739,4.9663,8.297>,USE THEO=YES
            HIT/BASIC,NORMAL,<-0.7084,4.9455,8.5547>,<0.0554071,0,0.9984638>,<-0.7084,4.9455,8.5547>,USE THEO=YES
            HIT/BASIC,NORMAL,<-0.3403,4.9558,8.361>,<0.7915692,0,0.6110795>,<-0.3403,4.9558,8.361>,USE THEO=YES
            ENDMEAS/
CYL2       =FEAT/CYLINDER,CARTESIAN,OUT,LEAST_SQR
            THEO/<3.5812,4.2473,8.0555>,<1,0,0>,1,6.9239
            ACTL/<3.5812,4.2473,8.0555>,<1,0,0>,1,6.9239
            MEAS/CYLINDER,9
            HIT/BASIC,NORMAL,<0.1193,3.8274,8.327>,<0,-0.8397228,0.5430154>,<0.1193,3.8274,8.327>,USE THEO=YES
            HIT/BASIC,NORMAL,<0.2176,4.3281,8.5489>,<0,0.1616868,0.9868421>,<0.2176,4.3281,8.5489>,USE THEO=YES
            HIT/BASIC,NORMAL,<0.1919,4.6483,8.3541>,<0,0.802079,0.5972179>,<0.1919,4.6483,8.3541>,USE THEO=YES
            HIT/BASIC,NORMAL,<3.6438,3.8189,8.3134>,<0,-0.8567188,0.5157838>,<3.6438,3.8189,8.3134>,USE THEO=YES
            HIT/BASIC,NORMAL,<3.6435,4.3112,8.5514>,<0,0.1278558,0.9917928>,<3.6435,4.3112,8.5514>,USE THEO=YES
            HIT/BASIC,NORMAL,<3.6194,4.6803,8.3055>,<0,0.8660251,0.5000005>,<3.6194,4.6803,8.3055>,USE THEO=YES
            HIT/BASIC,NORMAL,<6.9993,3.8531,8.3631>,<0,-0.7883187,0.6152671>,<6.9993,3.8531,8.3631>,USE THEO=YES
            HIT/BASIC,NORMAL,<7.0331,4.4295,8.5211>,<0,0.3645109,0.9311991>,<7.0331,4.4295,8.5211>,USE THEO=YES
            HIT/BASIC,NORMAL,<7.0431,4.6637,8.3322>,<0,0.8328943,0.5534321>,<7.0431,4.6637,8.3322>,USE THEO=YES
            ENDMEAS/
CYL3       =FEAT/CYLINDER,CARTESIAN,IN,LEAST_SQR
            THEO/<0,5.877,0.0111>,<0,0,-1>,0.406,0.8635
            ACTL/<0,5.877,0.0111>,<0,0,-1>,0.406,0.8635
            MEAS/CYLINDER,12
            HIT/BASIC,NORMAL,<-0.1886,5.9521,0.3776>,<0.9291144,-0.3697923,0>,<-0.1886,5.9521,0.3776>,USE THEO=YES
            HIT/BASIC,NORMAL,<-0.1767,5.7771,0.3736>,<0.8705747,0.4920362,0>,<-0.1767,5.7771,0.3736>,USE THEO=YES
            HIT/BASIC,NORMAL,<0.0464,5.6794,0.4033>,<-0.2283501,0.9735791,0>,<0.0464,5.6794,0.4033>,USE THEO=YES
            HIT/BASIC,NORMAL,<0.1897,5.8048,0.3373>,<-0.9347062,0.3554213,0>,<0.1897,5.8048,0.3373>,USE THEO=YES
            HIT/BASIC,NORMAL,<0.1546,6.0085,0.4428>,<-0.7616414,-0.6479988,0>,<0.1546,6.0085,0.4428>,USE THEO=YES
            HIT/BASIC,NORMAL,<-0.0173,6.0793,0.435>,<0.0853693,-0.9963494,0>,<-0.0173,6.0793,0.435>,USE THEO=YES
            HIT/BASIC,NORMAL,<0.0134,6.0796,-0.4204>,<-0.0658408,-0.9978301,0>,<0.0134,6.0796,-0.4204>,USE THEO=YES
            HIT/BASIC,NORMAL,<0.1639,5.9968,-0.4101>,<-0.8074171,-0.589981,0>,<0.1639,5.9968,-0.4101>,USE THEO=YES
            HIT/BASIC,NORMAL,<0.1976,5.8303,-0.3617>,<-0.9731685,0.2300936,0>,<0.1976,5.8303,-0.3617>,USE THEO=YES
            HIT/BASIC,NORMAL,<0.1196,5.713,-0.3997>,<-0.5892573,0.8079454,0>,<0.1196,5.713,-0.3997>,USE THEO=YES
            HIT/BASIC,NORMAL,<-0.0375,5.6775,-0.4206>,<0.1845342,0.9828261,0>,<-0.0375,5.6775,-0.4206>,USE THEO=YES
            HIT/BASIC,NORMAL,<-0.1828,5.7888,-0.3428>,<0.9006852,0.4344724,0>,<-0.1828,5.7888,-0.3428>,USE THEO=YES
            ENDMEAS/
LIN1       =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
            THEO/<0.8554,0,0>,<1,0,0>
            ACTL/<0.8554,0,0>,<1,0,0>
            CONSTR/LINE,CAST,CYL2,6.9239,DEPENDENT
LIN2       =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
            THEO/<9.6619,0.626,0>,<0.7071068,0.7071068,0>
            ACTL/<9.6619,0.626,0>,<0.7071068,0.7071068,0>
            CONSTR/LINE,CAST,CYL4,16.1386,DEPENDENT
PNT1       =FEAT/POINT,CARTESIAN,NO
            THEO/<0,0,0>,<0,-1,0>
            ACTL/<0,0,0>,<0,-1,0>
            CONSTR/POINT,INT,CYL1,CYL2
PNT2       =FEAT/POINT,CARTESIAN,NO
            THEO/<9.0359,0,0>,<1,0,0>
            ACTL/<9.0359,0,0>,<1,0,0>
            CONSTR/POINT,INT,CYL2,CYL4
            COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO,
            Measure diameter of tube and enter the radius for LIN4 & LIN5, and then update the line and update dimensions G.
PNT3       =FEAT/POINT,CARTESIAN,YES
            THEO/<21.9759,12.94,0>,<0.7071068,0.7071068,0>
            ACTL/<21.9759,12.94,0>,<0.7071068,0.7071068,0>
            CONSTR/POINT,PIERCE,CYL4,PLN3
LIN5       =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
            THEO/<0,-0.5,0>,<1,0,0>
            ACTL/<0,-0.5,0>,<1,0,0>
            CONSTR/LINE,OFFSET
            SURFACE NORMAL = <0,0,1>,MULTI POINT
            ID = PNT1,PNT2,,
            OFFSET = -0.5,-0.5
A3         =ALIGNMENT/START,RECALL:A2,LIST=YES
            ALIGNMENT/LEVEL,XPLUS,CYL4
            ALIGNMENT/ROTATE,YMINUS,TO,CYL2,ABOUT,XPLUS
            ALIGNMENT/TRANS,XAXIS,PNT2
            ALIGNMENT/TRANS,YAXIS,PNT2
            ALIGNMENT/TRANS,ZAXIS,PNT2
            ALIGNMENT/END
LIN4       =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
            THEO/<18.2999,-0.5,0>,<-1,0,0>
            ACTL/<18.2999,-0.5,0>,<-1,0,0>
            CONSTR/LINE,OFFSET
            SURFACE NORMAL = <0,0,1>,MULTI POINT
            ID = PNT3,PNT2,,
            OFFSET = 0.5,0.5
            RECALL/ALIGNMENT,INTERNAL,A2
PNT4       =FEAT/POINT,CARTESIAN,YES
            THEO/<9.243,-0.5,0>,<-0.7071068,-0.7071068,0>
            ACTL/<9.243,-0.5,0>,<-0.7071068,-0.7071068,0>
            CONSTR/POINT,INT,LIN4,LIN5
PNT5       =FEAT/POINT,CARTESIAN,NO
            THEO/<22.683,12.94,0>,<-0.7071068,-0.7071068,0>
            ACTL/<22.683,12.94,0>,<-0.7071068,-0.7071068,0>
            CONSTR/POINT,PIERCE,PLN3,LIN4
CIR1       =FEAT/CIRCLE,CARTESIAN,IN,LEAST_SQR
            THEO/<0,-0.4152,0>,<0,1,0>,0.406
            ACTL/<0,-0.4152,0>,<0,1,0>,0.406
            MEAS/CIRCLE,4,YPLUS
            HIT/BASIC,NORMAL,D=0,<-0.0554,-0.3784,0.1953>,<0.2728286,0,-0.9620627>,<-0.0554,-0.3784,0.1953>,USE THEO=YES
            HIT/BASIC,NORMAL,D=0,<0.1297,-0.4028,0.1561>,<-0.6390642,0,-0.7691534>,<0.1297,-0.4028,0.1561>,USE THEO=YES
            HIT/BASIC,NORMAL,D=0,<0.1566,-0.4366,-0.1291>,<-0.771526,0,0.6361978>,<0.1566,-0.4366,-0.1291>,USE THEO=YES
            HIT/BASIC,NORMAL,D=0,<-0.2017,-0.443,-0.023>,<0.9935587,0,0.1133187>,<-0.2017,-0.443,-0.023>,USE THEO=YES
            ENDMEAS/
CYL5       =FEAT/CYLINDER,CARTESIAN,IN,LEAST_SQR
            THEO/<25.275,13.0625,0>,<0,1,0>,0.34,0.1999
            ACTL/<25.275,13.0625,0>,<0,1,0>,0.34,0.1999
            MEAS/CYLINDER,8
            HIT/BASIC,NORMAL,<25.2294,12.9899,-0.1638>,<0.2682381,0,0.9633526>,<25.2294,12.9899,-0.1638>,USE THEO=YES
            HIT/BASIC,NORMAL,<25.4443,13.0114,-0.0155>,<-0.9958558,0,0.0909458>,<25.4443,13.0114,-0.0155>,USE THEO=YES
            HIT/BASIC,NORMAL,<25.4021,12.9939,0.1129>,<-0.7476551,0,-0.6640872>,<25.4021,12.9939,0.1129>,USE THEO=YES
            HIT/BASIC,NORMAL,<25.1118,12.9626,0.0475>,<0.9600935,0,-0.2796791>,<25.1118,12.9626,0.0475>,USE THEO=YES
            HIT/BASIC,NORMAL,<25.2391,13.1536,-0.1662>,<0.2114272,0,0.9773937>,<25.2391,13.1536,-0.1662>,USE THEO=YES
            HIT/BASIC,NORMAL,<25.438,13.1568,0.0483>,<-0.9587467,0,-0.2842619>,<25.438,13.1568,0.0483>,USE THEO=YES
            HIT/BASIC,NORMAL,<25.3361,13.1543,0.1586>,<-0.3592813,0,-0.9332293>,<25.3361,13.1543,0.1586>,USE THEO=YES
            HIT/BASIC,NORMAL,<25.1107,13.1625,0.0438>,<0.9662524,0,-0.2575973>,<25.1107,13.1625,0.0438>,USE THEO=YES
            ENDMEAS/

Children

No Data