Is there a true 64 bit pc-dmis version as opposed to a 32 bit version running on a 64 bit machine. I currenty has pc-dmis 2011 installed on a 64-bit lap-top.
If you have a current SMA, you can download and install v2013 MR1 64 bit.
If you are stuck in v2011, they had not developed separate 32/64 bit releases back then.
Be careful loading the new 64 bit version.
Make sure you read the notice that comes with it as there are some things it doesn't do yet.
(From the release notes)
The following items are only supported in the 32-bit (x86) version of the software; they are not available in the 64-bit version.
• CAD (3D ACIS data embedded inside of DXF Files) • Translators (Avail, Datalog, MeasureMax, MMIV, XMLStats, and Tutor) • NC product line • Vision (MEI, Metronics, QVI, ROI, TESAI++, and TESAVISIO) • CMM (B & S Backtalk, Embedded Board, Manmiti, Manmora, Metrocom, Mitutoyo GPIB, Zeiss Manual, GeoCom, GOM, LK, ManualCMM, Numerex, Omniman, Tech80, and anything using the parallel port driver) • Portable (FaroArmUSB and Axila)
