hexagon logo
Register Sign in
  • Replies 10 replies
  • Subscribers 31 subscribers
  • Views 122 views
  • Users 0 members are here
Options
Related

Dimension round slot from ends, not centers.

Wolfram
Edit: I realized I was asking the wrong question and the drawing snippet I attached doesn't actually show the dimension I'm looking for. Read on for updated info.

I need to find the distance from an end of the round slot to the origin. I've got to imagine I'm missing something pretty obvious...

I've got a part with 18 round slot "pockets" (.270" wide, .150" dp, various lengths) circling the OD of a cylinder. Their positions in Z are dimensioned from one end of the slots to the origin. Can I create planes tangent to the end of each slot and perpendicular to Z?

While I'm here, how do I dimension the depth of the slot from the highest point on the OD?

Don't cringe, been using 2011 Mr1 and now 2012 Mr1 lightly for about two years, still very much a newb. I'm comfortable in Summary mode, starting to claw my way through Command mode. Had a couple days on-site training from Colin and besides that, been figuring it out as I go(I've asked the bosses for more training). That being said, I'm stuck on these slot locations. Any help is much appreciated.

Thanks
Attached Files
Parents
  • How are you measuring the slots? Are you measuring the slots with circles and planes?

    Depending on the dimension controls on the OD, it may be as simple as doing a distance dimension by selecting the plane on your slot depth and your OD then ask use "add radius". I'm not on my normal computer so going from memory.

    In the same way, depending on how you measured the slots, you can ask for a similar dimension for your slot lengths or locations.

    First I'm measuring the flat at the bottom of the slots as a plane and then the Round Slots in reference to that plane.

    Just sat down, so I'll give your suggestions a shot and report back. Thanks for the help.

    Wayne: Thanks for the tip on the Auto Features. I was looking for an Auto Round slot yesterday, but didn't see it. I'll try that too. To be perfectly honest, I need some more experience with the Auto features anyway.
Reply
  • How are you measuring the slots? Are you measuring the slots with circles and planes?

    Depending on the dimension controls on the OD, it may be as simple as doing a distance dimension by selecting the plane on your slot depth and your OD then ask use "add radius". I'm not on my normal computer so going from memory.

    In the same way, depending on how you measured the slots, you can ask for a similar dimension for your slot lengths or locations.

    First I'm measuring the flat at the bottom of the slots as a plane and then the Round Slots in reference to that plane.

    Just sat down, so I'll give your suggestions a shot and report back. Thanks for the help.

    Wayne: Thanks for the tip on the Auto Features. I was looking for an Auto Round slot yesterday, but didn't see it. I'll try that too. To be perfectly honest, I need some more experience with the Auto features anyway.
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement