Hello, I was recently working on a part and bent the 3mm diameter probe tip on the Romer arm. I unthreaded the bent tip and threaded in the same length tip with a 2mm diameter ruby ball. How do I update or re-calibrate the romer so that it knows the tip diameter is 2mm now rather than 3mm?
I've "done" it.... with Hexagon's help. Don't remember exactly how but 1) you need a qualification sphere. 2) it involved writing the information back to the arm by changing a "bit" in the probe file.. Don't remember all the steps. Sorry.
I've "done" it.... with Hexagon's help. Don't remember exactly how but 1) you need a qualification sphere. 2) it involved writing the information back to the arm by changing a "bit" in the probe file.. Don't remember all the steps. Sorry.