true position of holes not working right.... help?

I'm doing something wrong here and not sure what it is. Wondered if you guys might be able to help me out.

STARTUP =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES
ALIGNMENT/END
MODE/MANUAL
FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS,SD;NOM,TOL,MEAS,DEV,OUTTOL, ,
LOADPROBE/4MM_BALL_615L_4D
TIP/TIP1, SHANKIJK=0, 0, 1, ANGLE=0
PLN1 =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,NONE,LEAST_SQR
THEO/&lt;311.1999,-134.8891,125.885&gt;,&lt;0,0,1&gt;
ACTL/&lt;-10.6231,-25.3068,14.678&gt;,&lt;-0.0012376,0.0041415,0.9999907&gt;
TARG/&lt;311.1999,-134.8891,125.885&gt;,&lt;0,0,1&gt;
ANGLE VEC=&lt;1,0,0&gt;,SQUARE
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
NUMHITS=2,NUMROWS=2
SPACER=0
SHOW HITS=NO
PLN2 =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,NONE,LEAST_SQR
THEO/&lt;311.705,-135.0023,124.6302&gt;,&lt;0,-1,0&gt;
ACTL/&lt;-9.4192,-25.9663,12.3943&gt;,&lt;0.9289078,-0.3702947,0.0034893&gt;
TARG/&lt;311.705,-135.0023,124.6302&gt;,&lt;0,-1,0&gt;
ANGLE VEC=&lt;1,0,0&gt;,SQUARE
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
NUMHITS=2,NUMROWS=2
SPACER=0
SHOW HITS=NO
CYL1 =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,FIXED_RAD
THEO/&lt;310.1247,-134.1023,122.235&gt;,&lt;0,0,1&gt;,1.0 025,0.65
ACTL/&lt;-10.2402,-25.6106,14.4098&gt;,&lt;-0.0650979,-0.0054909,0.9978638&gt;,1.0025,0.65
TARG/&lt;310.1247,-134.1023,122.235&gt;,&lt;0,0,1&gt;
START ANG=0,END ANG=360
ANGLE VEC=&lt;1,0,0&gt;
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
NUMHITS=3,NUMLEVELS=2,DEPTH=0,END OFFSET=0,PITCH=0
SAMPLE METHOD=SAMPLE_FEATURE
SAMPLE FEATURE=PLN1
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO
LIN1 =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
THEO/&lt;311.4525,-135.0023,125.885&gt;,&lt;1,0,0&gt;
ACTL/&lt;-9.3943,-25.8822,14.6819&gt;,&lt;0.3703058,0.928903 7,-0.0033888&gt;
CONSTR/LINE,INTOF,PLN1,PLN2
CIR1 =FEAT/CIRCLE,CARTESIAN,OUT,NO
THEO/&lt;310.1247,-134.1023,125.885&gt;,&lt;0,0,1&gt;,1.0 025
ACTL/&lt;-10.2578,-25.6121,14.6797&gt;,&lt;-0.0650979,-0.0054909,0.9978638&gt;,1.0025
CONSTR/CIRCLE,INTOF,CYL1,PLN1
A1 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
ALIGNMENT/LEVEL,ZPLUS,PLN1
ALIGNMENT/ROTATE,XPLUS,TO,LIN1,ABOUT,ZPLUS
ALIGNMENT/TRANS,YAXIS,CIR1
ALIGNMENT/TRANS,XAXIS,CIR1
ALIGNMENT/TRANS,ZAXIS,PLN1
ALIGNMENT/END
PLN3 =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,NONE,LEAST_SQR
THEO/&lt;-1.5917,0.9,-1.5111&gt;,&lt;0,1,0&gt;
ACTL/&lt;-0.0318,0.8998,-2.2604&gt;,&lt;0.0000361,0.9999997,-0.0008271&gt;
TARG/&lt;-1.5917,0.9,-1.5111&gt;,&lt;0,1,0&gt;
ANGLE VEC=&lt;-1,0,0&gt;,SQUARE
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
NUMHITS=2,NUMROWS=2
SPACER=0
SHOW HITS=NO
PLN4 =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,NONE,LEAST_SQR
THEO/&lt;-1.8917,-0.1576,-0.0709&gt;,&lt;-0.1736482,0,0.9848078&gt;
ACTL/&lt;-1.7992,-0.2975,-0.0538&gt;,&lt;-0.1721993,0.0010791,0.9850615&gt;
TARG/&lt;-1.8917,-0.1576,-0.0709&gt;,&lt;-0.1736482,0,0.9848078&gt;
ANGLE VEC=&lt;0.9848078,0,0.1736482&gt;,SQUARE
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
NUMHITS=2,NUMROWS=2
SPACER=0
SHOW HITS=NO
PLN5 =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,NONE,LEAST_SQR
THEO/&lt;1.865,-0.1932,-0.0662&gt;,&lt;0.1736482,0,0.9848078&g t;
ACTL/&lt;1.7915,0.083,-0.0524&gt;,&lt;0.1744341,0.0008077,0.98466 85&gt;
TARG/&lt;1.865,-0.1932,-0.0662&gt;,&lt;0.1736482,0,0.9848078&g t;
ANGLE VEC=&lt;0.9848078,0,-0.1736482&gt;,SQUARE
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
NUMHITS=2,NUMROWS=2
SPACER=0
SHOW HITS=NO

[COLOR=#FF0000]CYL2 =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,FIXED_RAD
THEO/&lt;2,-0.9,-0.75&gt;,&lt;0,-1,0&gt;,0.5015,1.8
ACTL/&lt;1.9985,-0.9,-0.7478&gt;,&lt;-0.0001875,-0.999827,0.018598&gt;,0.5015,1.8
TARG/&lt;2,-0.9,-0.75&gt;,&lt;0,-1,0&gt;
START ANG=0,END ANG=360
ANGLE VEC=&lt;1,0,0&gt;
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
NUMHITS=3,NUMLEVELS=2,DEPTH=0,END OFFSET=0,PITCH=0
SAMPLE METHOD=SAMPLE_FEATURE
SAMPLE FEATURE=NONE
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO
CYL3 =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,FIXED_RAD
THEO/&lt;1.5,-0.9,-3.65&gt;,&lt;0,-1,0&gt;,0.5015,1.8
ACTL/&lt;1.4977,-0.8999,-3.648&gt;,&lt;-0.0002088,-0.99965,0.0264531&gt;,0.5015,1.8
TARG/&lt;1.5,-0.9,-3.65&gt;,&lt;0,-1,0&gt;
START ANG=0,END ANG=360
ANGLE VEC=&lt;1,0,0&gt;
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
NUMHITS=3,NUMLEVELS=2,DEPTH=0,END OFFSET=0,PITCH=0
SAMPLE METHOD=SAMPLE_FEATURE
SAMPLE FEATURE=NONE
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO
CYL4 =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,FIXED_RAD
THEO/&lt;-1.5,-0.9,-3.65&gt;,&lt;0,-1,0&gt;,0.5015,1.8
ACTL/&lt;-1.5039,-0.9,-3.6485&gt;,&lt;0.0009411,-0.9999496,0.0099942&gt;,0.5015,1.8
TARG/&lt;-1.5,-0.9,-3.65&gt;,&lt;0,-1,0&gt;
START ANG=0,END ANG=360
ANGLE VEC=&lt;1,0,0&gt;
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
NUMHITS=3,NUMLEVELS=2,DEPTH=0,END OFFSET=0,PITCH=0
SAMPLE METHOD=SAMPLE_FEATURE
SAMPLE FEATURE=NONE
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO
CYL5 =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,FIXED_RAD
THEO/&lt;-2,-0.9,-0.75&gt;,&lt;0,-1,0&gt;,0.5015,1.8
ACTL/&lt;-2.0036,-0.9028,-0.7531&gt;,&lt;0.0014633,-0.999998,0.0013621&gt;,0.5015,1.8
TARG/&lt;-2,-0.9,-0.75&gt;,&lt;0,-1,0&gt;
START ANG=0,END ANG=360
ANGLE VEC=&lt;1,0,0&gt;
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
NUMHITS=3,NUMLEVELS=2,DEPTH=0,END OFFSET=0,PITCH=0
SAMPLE METHOD=SAMPLE_FEATURE
SAMPLE FEATURE=PLN2
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO[/COLOR]

The results are coming in way out of tolerance and I know that they should not be. Mic'd the cylinders and they are in tolerance. The distance dimensions could be off slightly but nowhere near as far as the results are saying.

Attached Files

Parents

jasonsfunderburk over 7 years ago

startup    =alignment/start,recall:use_part_setup,list=yes
            alignment/end
            mode/manual
            format/text,options, ,headings,symbols,sd;nom,tol,meas,dev,outtol, ,
            loadprobe/4mm_ball_615l_4d
            tip/tip1, shankijk=0, 0, 1, angle=0
pln1       =feat/contact/plane/default,cartesian,none,least_sqr
            theo/<311.1999,-134.8891,125.885>,<0,0,1>
            actl/<-10.6231,-25.3068,14.678>,<-0.0012376,0.0041415,0.9999907>
            targ/<311.1999,-134.8891,125.885>,<0,0,1>
            angle vec=<1,0,0>,square
            show feature parameters=no
            show contact parameters=yes
              numhits=2,numrows=2
              spacer=0
            show hits=no
pln2       =feat/contact/plane/default,cartesian,none,least_sqr
            theo/<311.705,-135.0023,124.6302>,<0,-1,0>
            actl/<-9.4192,-25.9663,12.3943>,<0.9289078,-0.3702947,0.0034893>
            targ/<311.705,-135.0023,124.6302>,<0,-1,0>
            angle vec=<1,0,0>,square
            show feature parameters=no
            show contact parameters=yes
              numhits=2,numrows=2
              spacer=0
            show hits=no
cyl1       =feat/contact/cylinder/default,cartesian,in,fixed_rad
            theo/<310.1247,-134.1023,122.235>,<0,0,1>,1.0025,0.65
            actl/<-10.2402,-25.6106,14.4098>,<-0.0650979,-0.0054909,0.9978638>,1.0025,0.65
            targ/<310.1247,-134.1023,122.235>,<0,0,1>
            start ang=0,end ang=360
            angle vec=<1,0,0>
            direction=ccw
            show feature parameters=no
            show contact parameters=yes
              numhits=3,numlevels=2,depth=0,end offset=0,pitch=0
              sample method=sample_feature
              sample feature=pln1
              find hole=disabled,onerror=no,read pos=no
            show hits=no
lin1       =feat/line,cartesian,unbounded,no
            theo/<311.4525,-135.0023,125.885>,<1,0,0>
            actl/<-9.3943,-25.8822,14.6819>,<0.3703058,0.9289037,-0.0033888>
            constr/line,intof,pln1,pln2
cir1       =feat/circle,cartesian,out,no
            theo/<310.1247,-134.1023,125.885>,<0,0,1>,1.0025
            actl/<-10.2578,-25.6121,14.6797>,<-0.0650979,-0.0054909,0.9978638>,1.0025
            constr/circle,intof,cyl1,pln1
a1         =alignment/start,recall:startup,list=yes
              alignment/level,zplus,pln1
              alignment/rotate,xplus,to,lin1,about,zplus
              alignment/trans,yaxis,cir1
              alignment/trans,xaxis,cir1
              alignment/trans,zaxis,pln1
            alignment/end
pln3       =feat/contact/plane/default,cartesian,none,least_sqr
            theo/<-1.5917,0.9,-1.5111>,<0,1,0>
            actl/<-0.0318,0.8998,-2.2604>,<0.0000361,0.9999997,-0.0008271>
            targ/<-1.5917,0.9,-1.5111>,<0,1,0>
            angle vec=<-1,0,0>,square
            show feature parameters=no
            show contact parameters=yes
              numhits=2,numrows=2
              spacer=0
            show hits=no
pln4       =feat/contact/plane/default,cartesian,none,least_sqr
            theo/<-1.8917,-0.1576,-0.0709>,<-0.1736482,0,0.9848078>
            actl/<-1.7992,-0.2975,-0.0538>,<-0.1721993,0.0010791,0.9850615>
            targ/<-1.8917,-0.1576,-0.0709>,<-0.1736482,0,0.9848078>
            angle vec=<0.9848078,0,0.1736482>,square
            show feature parameters=no
            show contact parameters=yes
              numhits=2,numrows=2
              spacer=0
            show hits=no
pln5       =feat/contact/plane/default,cartesian,none,least_sqr
            theo/<1.865,-0.1932,-0.0662>,<0.1736482,0,0.9848078>
            actl/<1.7915,0.083,-0.0524>,<0.1744341,0.0008077,0.9846685>
            targ/<1.865,-0.1932,-0.0662>,<0.1736482,0,0.9848078>
            angle vec=<0.9848078,0,-0.1736482>,square
            show feature parameters=no
            show contact parameters=yes
              numhits=2,numrows=2
              spacer=0
            show hits=no
pln6       =feat/contact/plane/default,cartesian,none,least_sqr
            theo/<2.592,0.0573,-0.8479>,<0.9848078,0,-0.1736482>
            actl/<2.5939,-0.0526,-0.832>,<0.9849842,0.0000557,-0.1726447>
            targ/<2.592,0.0573,-0.8479>,<0.9848078,0,-0.1736482>
            angle vec=<-0.1736482,0,-0.9848078>,square
            show feature parameters=no
            show contact parameters=yes
              numhits=2,numrows=2
              spacer=0
            show hits=no
pln7       =feat/contact/plane/default,cartesian,none,least_sqr
            theo/<-2.5892,0.098,-0.864>,<-0.9848078,0,-0.1736482>
            actl/<-2.6006,0.064,-0.8224>,<-0.984526,0.0000856,-0.1752383>
            targ/<-2.5892,0.098,-0.864>,<-0.9848078,0,-0.1736482>
            angle vec=<-0.1736482,0,0.9848078>,square
            show feature parameters=no
            show contact parameters=yes
              numhits=2,numrows=2
              spacer=0
            show hits=no
pln8       =feat/contact/plane/default,cartesian,none,least_sqr
            theo/<-0.8195,-1.0968,-1.072>,<-0.488195,-0.8628818,-0.130769>
            actl/<-0.7031,-1.0801,-1.6347>,<-0.4898241,-0.8620372,-0.130247>
            targ/<-0.8195,-1.0968,-1.072>,<-0.488195,-0.8628818,-0.130769>
            angle vec=<-0.2587407,0,0.9659468>,square
            show feature parameters=no
            show contact parameters=yes
              numhits=2,numrows=2
              spacer=0
            show hits=no
pln9       =feat/contact/plane/default,cartesian,none,least_sqr
            theo/<-0.1375,-1.2872,-1.2678>,<0,-0.9928123,-0.1196815>
            actl/<-0.0008,-1.2259,-1.8071>,<0.001001,-0.9928883,-0.1190458>
            targ/<-0.1375,-1.2872,-1.2678>,<0,-0.9928123,-0.1196815>
            angle vec=<1,0,0>,square
            show feature parameters=no
            show contact parameters=yes
              numhits=2,numrows=2
              spacer=0
            show hits=no
pln10      =feat/contact/plane/default,cartesian,none,least_sqr
            theo/<0.7507,-1.0996,-1.3106>,<0.488195,-0.8628818,-0.130769>
            actl/<0.7845,-1.0956,-1.2099>,<0.4892875,-0.8624097,-0.1297971>
            targ/<0.7507,-1.0996,-1.3106>,<0.488195,-0.8628818,-0.130769>
            angle vec=<-0.2587407,0,-0.9659468>,square
            show feature parameters=no
            show contact parameters=yes
              numhits=2,numrows=2
              spacer=0
            show hits=no

Reply

jasonsfunderburk over 7 years ago

startup    =alignment/start,recall:use_part_setup,list=yes
            alignment/end
            mode/manual
            format/text,options, ,headings,symbols,sd;nom,tol,meas,dev,outtol, ,
            loadprobe/4mm_ball_615l_4d
            tip/tip1, shankijk=0, 0, 1, angle=0
pln1       =feat/contact/plane/default,cartesian,none,least_sqr
            theo/<311.1999,-134.8891,125.885>,<0,0,1>
            actl/<-10.6231,-25.3068,14.678>,<-0.0012376,0.0041415,0.9999907>
            targ/<311.1999,-134.8891,125.885>,<0,0,1>
            angle vec=<1,0,0>,square
            show feature parameters=no
            show contact parameters=yes
              numhits=2,numrows=2
              spacer=0
            show hits=no
pln2       =feat/contact/plane/default,cartesian,none,least_sqr
            theo/<311.705,-135.0023,124.6302>,<0,-1,0>
            actl/<-9.4192,-25.9663,12.3943>,<0.9289078,-0.3702947,0.0034893>
            targ/<311.705,-135.0023,124.6302>,<0,-1,0>
            angle vec=<1,0,0>,square
            show feature parameters=no
            show contact parameters=yes
              numhits=2,numrows=2
              spacer=0
            show hits=no
cyl1       =feat/contact/cylinder/default,cartesian,in,fixed_rad
            theo/<310.1247,-134.1023,122.235>,<0,0,1>,1.0025,0.65
            actl/<-10.2402,-25.6106,14.4098>,<-0.0650979,-0.0054909,0.9978638>,1.0025,0.65
            targ/<310.1247,-134.1023,122.235>,<0,0,1>
            start ang=0,end ang=360
            angle vec=<1,0,0>
            direction=ccw
            show feature parameters=no
            show contact parameters=yes
              numhits=3,numlevels=2,depth=0,end offset=0,pitch=0
              sample method=sample_feature
              sample feature=pln1
              find hole=disabled,onerror=no,read pos=no
            show hits=no
lin1       =feat/line,cartesian,unbounded,no
            theo/<311.4525,-135.0023,125.885>,<1,0,0>
            actl/<-9.3943,-25.8822,14.6819>,<0.3703058,0.9289037,-0.0033888>
            constr/line,intof,pln1,pln2
cir1       =feat/circle,cartesian,out,no
            theo/<310.1247,-134.1023,125.885>,<0,0,1>,1.0025
            actl/<-10.2578,-25.6121,14.6797>,<-0.0650979,-0.0054909,0.9978638>,1.0025
            constr/circle,intof,cyl1,pln1
a1         =alignment/start,recall:startup,list=yes
              alignment/level,zplus,pln1
              alignment/rotate,xplus,to,lin1,about,zplus
              alignment/trans,yaxis,cir1
              alignment/trans,xaxis,cir1
              alignment/trans,zaxis,pln1
            alignment/end
pln3       =feat/contact/plane/default,cartesian,none,least_sqr
            theo/<-1.5917,0.9,-1.5111>,<0,1,0>
            actl/<-0.0318,0.8998,-2.2604>,<0.0000361,0.9999997,-0.0008271>
            targ/<-1.5917,0.9,-1.5111>,<0,1,0>
            angle vec=<-1,0,0>,square
            show feature parameters=no
            show contact parameters=yes
              numhits=2,numrows=2
              spacer=0
            show hits=no
pln4       =feat/contact/plane/default,cartesian,none,least_sqr
            theo/<-1.8917,-0.1576,-0.0709>,<-0.1736482,0,0.9848078>
            actl/<-1.7992,-0.2975,-0.0538>,<-0.1721993,0.0010791,0.9850615>
            targ/<-1.8917,-0.1576,-0.0709>,<-0.1736482,0,0.9848078>
            angle vec=<0.9848078,0,0.1736482>,square
            show feature parameters=no
            show contact parameters=yes
              numhits=2,numrows=2
              spacer=0
            show hits=no
pln5       =feat/contact/plane/default,cartesian,none,least_sqr
            theo/<1.865,-0.1932,-0.0662>,<0.1736482,0,0.9848078>
            actl/<1.7915,0.083,-0.0524>,<0.1744341,0.0008077,0.9846685>
            targ/<1.865,-0.1932,-0.0662>,<0.1736482,0,0.9848078>
            angle vec=<0.9848078,0,-0.1736482>,square
            show feature parameters=no
            show contact parameters=yes
              numhits=2,numrows=2
              spacer=0
            show hits=no
pln6       =feat/contact/plane/default,cartesian,none,least_sqr
            theo/<2.592,0.0573,-0.8479>,<0.9848078,0,-0.1736482>
            actl/<2.5939,-0.0526,-0.832>,<0.9849842,0.0000557,-0.1726447>
            targ/<2.592,0.0573,-0.8479>,<0.9848078,0,-0.1736482>
            angle vec=<-0.1736482,0,-0.9848078>,square
            show feature parameters=no
            show contact parameters=yes
              numhits=2,numrows=2
              spacer=0
            show hits=no
pln7       =feat/contact/plane/default,cartesian,none,least_sqr
            theo/<-2.5892,0.098,-0.864>,<-0.9848078,0,-0.1736482>
            actl/<-2.6006,0.064,-0.8224>,<-0.984526,0.0000856,-0.1752383>
            targ/<-2.5892,0.098,-0.864>,<-0.9848078,0,-0.1736482>
            angle vec=<-0.1736482,0,0.9848078>,square
            show feature parameters=no
            show contact parameters=yes
              numhits=2,numrows=2
              spacer=0
            show hits=no
pln8       =feat/contact/plane/default,cartesian,none,least_sqr
            theo/<-0.8195,-1.0968,-1.072>,<-0.488195,-0.8628818,-0.130769>
            actl/<-0.7031,-1.0801,-1.6347>,<-0.4898241,-0.8620372,-0.130247>
            targ/<-0.8195,-1.0968,-1.072>,<-0.488195,-0.8628818,-0.130769>
            angle vec=<-0.2587407,0,0.9659468>,square
            show feature parameters=no
            show contact parameters=yes
              numhits=2,numrows=2
              spacer=0
            show hits=no
pln9       =feat/contact/plane/default,cartesian,none,least_sqr
            theo/<-0.1375,-1.2872,-1.2678>,<0,-0.9928123,-0.1196815>
            actl/<-0.0008,-1.2259,-1.8071>,<0.001001,-0.9928883,-0.1190458>
            targ/<-0.1375,-1.2872,-1.2678>,<0,-0.9928123,-0.1196815>
            angle vec=<1,0,0>,square
            show feature parameters=no
            show contact parameters=yes
              numhits=2,numrows=2
              spacer=0
            show hits=no
pln10      =feat/contact/plane/default,cartesian,none,least_sqr
            theo/<0.7507,-1.0996,-1.3106>,<0.488195,-0.8628818,-0.130769>
            actl/<0.7845,-1.0956,-1.2099>,<0.4892875,-0.8624097,-0.1297971>
            targ/<0.7507,-1.0996,-1.3106>,<0.488195,-0.8628818,-0.130769>
            angle vec=<-0.2587407,0,-0.9659468>,square
            show feature parameters=no
            show contact parameters=yes
              numhits=2,numrows=2
              spacer=0
            show hits=no

Children

No Data