Plane With One Offset Point

Good morning all. I'm actually a CNC mill programmer trying to learn our Romer arm with PC-DMIS 2016 with zero experience so hopefully someone can help me out. I did a search with no luck, so sorry if this has been asked before.
I have a part that I'm trying to do Quick Start > Create Alignment > Plane/Line/Point but I can't figure out how to have the orientation match the part. The problem is the plane has one of it's 3 points called out as -2.556" from the other two points, and the line has one of it's points called out as -.675".
If anyone can offer any help I'd appreciate it. And when I say I have zero experience I mean I just touched the program for the first time yesterday.....

Parents

bradacc over 6 years ago

Looks like it worked! Thanks a ton!! I'm not sure if I did it the way you were trying to explain to me, but I think so. I started with the same 3 points to create a plane, then used 2 of those points for a line so I could create an alignment. After that I did the real line/point to finish the alignment, then started all over with my 'real' 3/2/1 to create "A3". After that were a few point checks for sanity.

PART NAME  : 70720867-6 Brad
REV NUMBER : A
SER NUMBER :
STATS COUNT : 1

STARTUP    =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES
            ALIGNMENT/END
            MODE/MANUAL
            FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,OUTTOL, ,
            LOADPROBE/BALL_PROBE
            TIP/TIP1, SHANKIJK=0, 0, 1, ANGLE=0
PNT1       =FEAT/POINT,CARTESIAN
            THEO/<-1.769,-3.4627,0>,<-0.0000001,0,1>
            ACTL/<-11.6509,7.3988,6.0065>,<0.1304011,0.6776404,0.7237396>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-1.769,-3.4627,0>,<-0.0000001,0,1>,<-11.6509,7.3988,6.0065>,USE THEO=YES
            ENDMEAS/
PNT2       =FEAT/POINT,CARTESIAN
            THEO/<-1.7692,0.9002,0>,<-0.0000001,0,1>
            ACTL/<-15.9685,7.2267,6.0118>,<-0.4238766,0.5736142,0.7009247>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-1.7692,0.9002,0>,<-0.0000001,0,1>,<-15.9685,7.2267,6.0118>,USE THEO=YES
            ENDMEAS/
PNT3       =FEAT/POINT,CARTESIAN
            THEO/<-19.7268,-1.2728,-2.556>,<-0.0000001,0,1>
            ACTL/<-13.0474,-10.4393,2.9875>,<0.0420584,-0.9459374,0.3216108>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-19.7268,-1.2728,-2.556>,<-0.0000001,0,1>,<-13.0474,-10.4393,2.9875>,USE THEO=YES
            ENDMEAS/
PLN1       =FEAT/PLANE,CARTESIAN,TRIANGLE,NO
            THEO/<-7.755,-1.2784,0>,<-0.0000001,0,1>
            ACTL/<-13.5537,1.3732,5.8537>,<0.00226,-0.0260747,0.9996574>
            CONSTR/PLANE,OFFSET
            ID = PNT1,PNT2,PNT3,,
            OFFSET = 0,0,2.556
LIN3       =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
            THEO/<-1.769,-3.4627,0>,<-0.0000683,1,0>
            ACTL/<-11.6509,7.3988,6.0065>,<-0.999206,-0.0398225,0.0012202>
            CONSTR/LINE,BF,3D,PNT1,PNT2,,
            OUTLIER_REMOVAL/OFF,3
            FILTER/OFF,WAVELENGTH=0
A2         =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
              ALIGNMENT/LEVEL,ZPLUS,PLN1
              ALIGNMENT/TRANS,ZAXIS,PLN1
              ALIGNMENT/ROTATE,YPLUS,TO,LIN3,ABOUT,ZPLUS
              ALIGNMENT/TRANS,XAXIS,LIN3
            ALIGNMENT/END
PNT4       =FEAT/POINT,CARTESIAN
            THEO/<-17.9739,-0.6736,-2.1777>,<0.0000683,1,0>
            ACTL/<-17.887,14.0913,-2.2411>,<0.0000683,1,0>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-17.9739,-0.6736,-2.1777>,<0.0000683,1,0>,<-17.887,14.0913,-2.2411>,USE THEO=YES
            ENDMEAS/
PNT5       =FEAT/POINT,CARTESIAN
            THEO/<1.0233,0.0001,0.296>,<0.0000683,1,0>
            ACTL/<1.1426,14.8317,0.2861>,<0.0000683,1,0>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<1.0233,0.0001,0.296>,<0.0000683,1,0>,<1.1426,14.8317,0.2861>,USE THEO=YES
            ENDMEAS/
LIN1       =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
            THEO/<-17.9739,0.0014,-0.9409>,<1,-0.0000683,0>
            ACTL/<-17.8894,14.7663,-0.9775>,<0.9999941,0.0034384,0>
            CONSTR/LINE,OFFSET
            SURFACE NORMAL = <0,0,1>,MULTI POINT
            ID = PNT4,PNT5,,
            OFFSET = 0.675,0
PNT6       =FEAT/POINT,CARTESIAN
            THEO/<1.7692,0.5054,-0.2154>,<1,-0.0000683,0>
            ACTL/<1.8461,15.3085,-0.2135>,<1,-0.0000683,0>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<1.7692,0.5054,-0.2154>,<1,-0.0000683,0>,<1.8461,15.3085,-0.2135>,USE THEO=YES
            ENDMEAS/
A1         =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
              ALIGNMENT/LEVEL,ZPLUS,PLN1
              ALIGNMENT/TRANS,ZAXIS,PLN1
              ALIGNMENT/ROTATE,XPLUS,TO,LIN1,ABOUT,ZPLUS
              ALIGNMENT/TRANS,YAXIS,LIN1
              ALIGNMENT/TRANS,XAXIS,PNT6
            ALIGNMENT/END
PNT7       =FEAT/POINT,CARTESIAN
            THEO/<-1.7558,-3.5387,0>,<0,0,1>
            ACTL/<-1.7819,-3.4866,-0.0347>,<0,0,1>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-1.7558,-3.5387,0>,<0,0,1>,<-1.7819,-3.4866,-0.0347>,USE THEO=YES
            ENDMEAS/
PNT8       =FEAT/POINT,CARTESIAN
            THEO/<-1.8002,0.9309,0>,<0,0,1>
            ACTL/<-1.7635,0.8772,-0.0389>,<0,0,1>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-1.8002,0.9309,0>,<0,0,1>,<-1.7635,0.8772,-0.0389>,USE THEO=YES
            ENDMEAS/
PNT9       =FEAT/POINT,CARTESIAN
            THEO/<-19.7401,-1.2527,-2.556>,<0,0,1>
            ACTL/<-19.7652,-1.3238,-2.6328>,<0,0,1>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-19.7401,-1.2527,-2.556>,<0,0,1>,<-19.7652,-1.3238,-2.6328>,USE THEO=YES
            ENDMEAS/
PLN2       =FEAT/PLANE,CARTESIAN,TRIANGLE,NO
            THEO/<-7.7654,-1.2868,0>,<0,0,1>
            ACTL/<-7.7721,-1.3102,-0.0501>,<-0.0022268,0.0009731,0.999997>
            CONSTR/PLANE,OFFSET
            ID = PNT7,PNT8,PNT9,,
            OFFSET = 0,0,2.556
PNT10      =FEAT/POINT,CARTESIAN
            THEO/<-19.7119,-0.675,-2.1523>,<0,1,0>
            ACTL/<-19.715,-0.6758,-2.2441>,<0,1,0>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-19.7119,-0.675,-2.1523>,<0,1,0>,<-19.715,-0.6758,-2.2441>,USE THEO=YES
            ENDMEAS/
PNT11      =FEAT/POINT,CARTESIAN
            THEO/<-0.6974,0,0.2969>,<0,1,0>
            ACTL/<-0.7501,0.0025,0.2754>,<0,1,0>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-0.6974,0,0.2969>,<0,1,0>,<-0.7501,0.0025,0.2754>,USE THEO=YES
            ENDMEAS/
LIN2       =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
            THEO/<-19.7119,0,-0.9277>,<1,0,0>
            ACTL/<-19.7151,-0.0008,-0.9844>,<1,0.0001741,0>
            CONSTR/LINE,OFFSET
            SURFACE NORMAL = <0,0,1>,MULTI POINT
            ID = PNT10,PNT11,,
            OFFSET = 0.675,0
PNT12      =FEAT/POINT,CARTESIAN
            THEO/<0,0.523,-0.1891>,<1,0,0>
            ACTL/<0.0029,0.5414,-0.2506>,<1,0,0>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<0,0.523,-0.1891>,<1,0,0>,<0.0029,0.5414,-0.2506>,USE THEO=YES
            ENDMEAS/
A3         =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
              ALIGNMENT/LEVEL,ZPLUS,PLN2
              ALIGNMENT/TRANS,ZAXIS,PLN2
              ALIGNMENT/ROTATE,XPLUS,TO,LIN2,ABOUT,ZPLUS
              ALIGNMENT/TRANS,YAXIS,LIN2
              ALIGNMENT/TRANS,XAXIS,PNT12
            ALIGNMENT/END
PNT13      =FEAT/POINT,CARTESIAN
            THEO/<-1.8287,0.9742,0>,<0,0,1>
            ACTL/<-1.7832,0.8976,0.0013>,<0,0,1>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-1.8287,0.9742,0>,<0,0,1>,<-1.7832,0.8976,0.0013>,USE THEO=YES
            ENDMEAS/
DIM LOC1= LOCATION OF POINT PNT13  UNITS=IN ,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH  HALF ANGLE=NO
AX    NOMINAL       +TOL       -TOL       MEAS        DEV     OUTTOL
Z       0.0000     0.0100     0.0100     0.0013     0.0013     0.0000 -----#---
END OF DIMENSION LOC1
PNT14      =FEAT/POINT,CARTESIAN
            THEO/<-1.8028,-3.5702,0>,<0,0,1>
            ACTL/<-1.7979,-3.4944,0.0001>,<0,0,1>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-1.8028,-3.5702,0>,<0,0,1>,<-1.7979,-3.4944,0.0001>,USE THEO=YES
            ENDMEAS/
DIM LOC2= LOCATION OF POINT PNT14  UNITS=IN ,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH  HALF ANGLE=NO
AX    NOMINAL       +TOL       -TOL       MEAS        DEV     OUTTOL
Z       0.0000     0.0100     0.0100     0.0001     0.0001     0.0000 ----#----
END OF DIMENSION LOC2
PNT15      =FEAT/POINT,CARTESIAN
            THEO/<-19.731,-1.2431,-2.556>,<0,0,1>
            ACTL/<-19.8195,-1.3072,-2.5569>,<0,0,1>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-19.731,-1.2431,-2.556>,<0,0,1>,<-19.8195,-1.3072,-2.5569>,USE THEO=YES
            ENDMEAS/
DIM LOC3= LOCATION OF POINT PNT15  UNITS=IN ,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH  HALF ANGLE=NO
AX    NOMINAL       +TOL       -TOL       MEAS        DEV     OUTTOL
Z      -2.5560     0.0100     0.0100    -2.5569    -0.0009     0.0000 ----#----
END OF DIMENSION LOC3
PNT16      =FEAT/POINT,CARTESIAN
            THEO/<-19.6631,-0.675,-2.1478>,<0,1,0>
            ACTL/<-19.7229,-0.673,-2.1683>,<0,1,0>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-19.6631,-0.675,-2.1478>,<0,1,0>,<-19.7229,-0.673,-2.1683>,USE THEO=YES
            ENDMEAS/
DIM LOC4= LOCATION OF POINT PNT16  UNITS=IN ,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH  HALF ANGLE=NO
AX    NOMINAL       +TOL       -TOL       MEAS        DEV     OUTTOL
Y      -0.6750     0.0020     0.0020    -0.6730     0.0020     0.0000 -------->
END OF DIMENSION LOC4

Reply

bradacc over 6 years ago

PART NAME  : 70720867-6 Brad
REV NUMBER : A
SER NUMBER :
STATS COUNT : 1

STARTUP    =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES
            ALIGNMENT/END
            MODE/MANUAL
            FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,OUTTOL, ,
            LOADPROBE/BALL_PROBE
            TIP/TIP1, SHANKIJK=0, 0, 1, ANGLE=0
PNT1       =FEAT/POINT,CARTESIAN
            THEO/<-1.769,-3.4627,0>,<-0.0000001,0,1>
            ACTL/<-11.6509,7.3988,6.0065>,<0.1304011,0.6776404,0.7237396>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-1.769,-3.4627,0>,<-0.0000001,0,1>,<-11.6509,7.3988,6.0065>,USE THEO=YES
            ENDMEAS/
PNT2       =FEAT/POINT,CARTESIAN
            THEO/<-1.7692,0.9002,0>,<-0.0000001,0,1>
            ACTL/<-15.9685,7.2267,6.0118>,<-0.4238766,0.5736142,0.7009247>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-1.7692,0.9002,0>,<-0.0000001,0,1>,<-15.9685,7.2267,6.0118>,USE THEO=YES
            ENDMEAS/
PNT3       =FEAT/POINT,CARTESIAN
            THEO/<-19.7268,-1.2728,-2.556>,<-0.0000001,0,1>
            ACTL/<-13.0474,-10.4393,2.9875>,<0.0420584,-0.9459374,0.3216108>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-19.7268,-1.2728,-2.556>,<-0.0000001,0,1>,<-13.0474,-10.4393,2.9875>,USE THEO=YES
            ENDMEAS/
PLN1       =FEAT/PLANE,CARTESIAN,TRIANGLE,NO
            THEO/<-7.755,-1.2784,0>,<-0.0000001,0,1>
            ACTL/<-13.5537,1.3732,5.8537>,<0.00226,-0.0260747,0.9996574>
            CONSTR/PLANE,OFFSET
            ID = PNT1,PNT2,PNT3,,
            OFFSET = 0,0,2.556
LIN3       =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
            THEO/<-1.769,-3.4627,0>,<-0.0000683,1,0>
            ACTL/<-11.6509,7.3988,6.0065>,<-0.999206,-0.0398225,0.0012202>
            CONSTR/LINE,BF,3D,PNT1,PNT2,,
            OUTLIER_REMOVAL/OFF,3
            FILTER/OFF,WAVELENGTH=0
A2         =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
              ALIGNMENT/LEVEL,ZPLUS,PLN1
              ALIGNMENT/TRANS,ZAXIS,PLN1
              ALIGNMENT/ROTATE,YPLUS,TO,LIN3,ABOUT,ZPLUS
              ALIGNMENT/TRANS,XAXIS,LIN3
            ALIGNMENT/END
PNT4       =FEAT/POINT,CARTESIAN
            THEO/<-17.9739,-0.6736,-2.1777>,<0.0000683,1,0>
            ACTL/<-17.887,14.0913,-2.2411>,<0.0000683,1,0>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-17.9739,-0.6736,-2.1777>,<0.0000683,1,0>,<-17.887,14.0913,-2.2411>,USE THEO=YES
            ENDMEAS/
PNT5       =FEAT/POINT,CARTESIAN
            THEO/<1.0233,0.0001,0.296>,<0.0000683,1,0>
            ACTL/<1.1426,14.8317,0.2861>,<0.0000683,1,0>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<1.0233,0.0001,0.296>,<0.0000683,1,0>,<1.1426,14.8317,0.2861>,USE THEO=YES
            ENDMEAS/
LIN1       =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
            THEO/<-17.9739,0.0014,-0.9409>,<1,-0.0000683,0>
            ACTL/<-17.8894,14.7663,-0.9775>,<0.9999941,0.0034384,0>
            CONSTR/LINE,OFFSET
            SURFACE NORMAL = <0,0,1>,MULTI POINT
            ID = PNT4,PNT5,,
            OFFSET = 0.675,0
PNT6       =FEAT/POINT,CARTESIAN
            THEO/<1.7692,0.5054,-0.2154>,<1,-0.0000683,0>
            ACTL/<1.8461,15.3085,-0.2135>,<1,-0.0000683,0>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<1.7692,0.5054,-0.2154>,<1,-0.0000683,0>,<1.8461,15.3085,-0.2135>,USE THEO=YES
            ENDMEAS/
A1         =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
              ALIGNMENT/LEVEL,ZPLUS,PLN1
              ALIGNMENT/TRANS,ZAXIS,PLN1
              ALIGNMENT/ROTATE,XPLUS,TO,LIN1,ABOUT,ZPLUS
              ALIGNMENT/TRANS,YAXIS,LIN1
              ALIGNMENT/TRANS,XAXIS,PNT6
            ALIGNMENT/END
PNT7       =FEAT/POINT,CARTESIAN
            THEO/<-1.7558,-3.5387,0>,<0,0,1>
            ACTL/<-1.7819,-3.4866,-0.0347>,<0,0,1>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-1.7558,-3.5387,0>,<0,0,1>,<-1.7819,-3.4866,-0.0347>,USE THEO=YES
            ENDMEAS/
PNT8       =FEAT/POINT,CARTESIAN
            THEO/<-1.8002,0.9309,0>,<0,0,1>
            ACTL/<-1.7635,0.8772,-0.0389>,<0,0,1>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-1.8002,0.9309,0>,<0,0,1>,<-1.7635,0.8772,-0.0389>,USE THEO=YES
            ENDMEAS/
PNT9       =FEAT/POINT,CARTESIAN
            THEO/<-19.7401,-1.2527,-2.556>,<0,0,1>
            ACTL/<-19.7652,-1.3238,-2.6328>,<0,0,1>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-19.7401,-1.2527,-2.556>,<0,0,1>,<-19.7652,-1.3238,-2.6328>,USE THEO=YES
            ENDMEAS/
PLN2       =FEAT/PLANE,CARTESIAN,TRIANGLE,NO
            THEO/<-7.7654,-1.2868,0>,<0,0,1>
            ACTL/<-7.7721,-1.3102,-0.0501>,<-0.0022268,0.0009731,0.999997>
            CONSTR/PLANE,OFFSET
            ID = PNT7,PNT8,PNT9,,
            OFFSET = 0,0,2.556
PNT10      =FEAT/POINT,CARTESIAN
            THEO/<-19.7119,-0.675,-2.1523>,<0,1,0>
            ACTL/<-19.715,-0.6758,-2.2441>,<0,1,0>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-19.7119,-0.675,-2.1523>,<0,1,0>,<-19.715,-0.6758,-2.2441>,USE THEO=YES
            ENDMEAS/
PNT11      =FEAT/POINT,CARTESIAN
            THEO/<-0.6974,0,0.2969>,<0,1,0>
            ACTL/<-0.7501,0.0025,0.2754>,<0,1,0>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-0.6974,0,0.2969>,<0,1,0>,<-0.7501,0.0025,0.2754>,USE THEO=YES
            ENDMEAS/
LIN2       =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
            THEO/<-19.7119,0,-0.9277>,<1,0,0>
            ACTL/<-19.7151,-0.0008,-0.9844>,<1,0.0001741,0>
            CONSTR/LINE,OFFSET
            SURFACE NORMAL = <0,0,1>,MULTI POINT
            ID = PNT10,PNT11,,
            OFFSET = 0.675,0
PNT12      =FEAT/POINT,CARTESIAN
            THEO/<0,0.523,-0.1891>,<1,0,0>
            ACTL/<0.0029,0.5414,-0.2506>,<1,0,0>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<0,0.523,-0.1891>,<1,0,0>,<0.0029,0.5414,-0.2506>,USE THEO=YES
            ENDMEAS/
A3         =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
              ALIGNMENT/LEVEL,ZPLUS,PLN2
              ALIGNMENT/TRANS,ZAXIS,PLN2
              ALIGNMENT/ROTATE,XPLUS,TO,LIN2,ABOUT,ZPLUS
              ALIGNMENT/TRANS,YAXIS,LIN2
              ALIGNMENT/TRANS,XAXIS,PNT12
            ALIGNMENT/END
PNT13      =FEAT/POINT,CARTESIAN
            THEO/<-1.8287,0.9742,0>,<0,0,1>
            ACTL/<-1.7832,0.8976,0.0013>,<0,0,1>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-1.8287,0.9742,0>,<0,0,1>,<-1.7832,0.8976,0.0013>,USE THEO=YES
            ENDMEAS/
DIM LOC1= LOCATION OF POINT PNT13  UNITS=IN ,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH  HALF ANGLE=NO
AX    NOMINAL       +TOL       -TOL       MEAS        DEV     OUTTOL
Z       0.0000     0.0100     0.0100     0.0013     0.0013     0.0000 -----#---
END OF DIMENSION LOC1
PNT14      =FEAT/POINT,CARTESIAN
            THEO/<-1.8028,-3.5702,0>,<0,0,1>
            ACTL/<-1.7979,-3.4944,0.0001>,<0,0,1>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-1.8028,-3.5702,0>,<0,0,1>,<-1.7979,-3.4944,0.0001>,USE THEO=YES
            ENDMEAS/
DIM LOC2= LOCATION OF POINT PNT14  UNITS=IN ,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH  HALF ANGLE=NO
AX    NOMINAL       +TOL       -TOL       MEAS        DEV     OUTTOL
Z       0.0000     0.0100     0.0100     0.0001     0.0001     0.0000 ----#----
END OF DIMENSION LOC2
PNT15      =FEAT/POINT,CARTESIAN
            THEO/<-19.731,-1.2431,-2.556>,<0,0,1>
            ACTL/<-19.8195,-1.3072,-2.5569>,<0,0,1>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-19.731,-1.2431,-2.556>,<0,0,1>,<-19.8195,-1.3072,-2.5569>,USE THEO=YES
            ENDMEAS/
DIM LOC3= LOCATION OF POINT PNT15  UNITS=IN ,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH  HALF ANGLE=NO
AX    NOMINAL       +TOL       -TOL       MEAS        DEV     OUTTOL
Z      -2.5560     0.0100     0.0100    -2.5569    -0.0009     0.0000 ----#----
END OF DIMENSION LOC3
PNT16      =FEAT/POINT,CARTESIAN
            THEO/<-19.6631,-0.675,-2.1478>,<0,1,0>
            ACTL/<-19.7229,-0.673,-2.1683>,<0,1,0>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-19.6631,-0.675,-2.1478>,<0,1,0>,<-19.7229,-0.673,-2.1683>,USE THEO=YES
            ENDMEAS/
DIM LOC4= LOCATION OF POINT PNT16  UNITS=IN ,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH  HALF ANGLE=NO
AX    NOMINAL       +TOL       -TOL       MEAS        DEV     OUTTOL
Y      -0.6750     0.0020     0.0020    -0.6730     0.0020     0.0000 -------->
END OF DIMENSION LOC4

Children

No Data