PCDMIS 2016 SP10... Using a free form alignment on some contoured parts that we've been making/inspecting for years. The tolerance is set at +/- .010" ..I'm taking a set of points, and making a constructed feature set. I then profile dimension the constructed set. The outputted profile shows a min of -.007" and a max of .006" (within the +/- .010"). It shows a Deviation of .013" (out of .020) ... however, the output is listed in red, and despite the numbers showing in tolerance, lists the output in red and shows an out of tolerance of .018"
just for shits, I opened the tolerance band to +/-.100" ...It still showed out, but now with an out of tolerance of .118" ??? The min/max and dev still all show within the +/- .010, but somehow the profile is still reporting out of tolerance.
These are parts we've done thousands of, and this report I've done hundreds of times with nothing being change recently. Not sure what's up and I need to get this report printed for the customer... any ideas?
