hexagon logo
Register Sign in
  • Replies 7 replies
  • Subscribers 31 subscribers
  • Views 154 views
  • Users 0 members are here
Options
Related

GD&T interpretation

asif_inayath_ai
​Hi Folks,

I am trying to understand the highlighted callout on the drawing attached. Does it mean that there is a requirement for the Positional Verification of the clip and the profile check on the inner edge if the clip. If that is the case then the profile check (+/-0.25 which is half of 0.5) would have the bonus form the positional check (2) ? so that the total profile check would be for 2.5 (+/-1.25). Your opinions are highly appreciated.

​
Attached Files
Parents
  • Profile requirement in this case checks form only not location. That is what T.P callout aims for. My suggestion take one point on one side of clip & another on its other side get mid point & check its location to the datum scheme. For profile take a bunch of points or scan around its contour & establish a scan set & then check its form. But to be sure discuss this with engineering like the other commenter had said. Let them sign off anything they decide.
    ​
Reply
  • Profile requirement in this case checks form only not location. That is what T.P callout aims for. My suggestion take one point on one side of clip & another on its other side get mid point & check its location to the datum scheme. For profile take a bunch of points or scan around its contour & establish a scan set & then check its form. But to be sure discuss this with engineering like the other commenter had said. Let them sign off anything they decide.
    ​
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement