I keep getting an error that says "pc-dmis has encountered and error and must close" when I start PC-DMIS with the Roemer. I have tried restarting the computer (multiple times), and reloading pc dmis. I can start it and home the unit out but as soon as I create a program or try to open an existing one it boots me out. We have only had the unit for two weeks. I had this problem before and tech support told me to reload the software which worked for about 1 day and now I'm back to this. I've been using pc-dmis on the cmm for years so this one has me scratching my noggin!!
Louie "The Switchman"
"I'm gettin' heartburn here Tony, do somethin' terrible."
It sounds like your getting an interface error. When PC-Dmis loses communication with the machine controller it kicks out like that. I have a Romer Infinite arm that when the battery in it gets lower then 75% it starts getting errors in PC-Dmis. I suspect it has a marginal comm board that is causing the problem.
It sounds like your getting an interface error. When PC-Dmis loses communication with the machine controller it kicks out like that. I have a Romer Infinite arm that when the battery in it gets lower then 75% it starts getting errors in PC-Dmis. I suspect it has a marginal comm board that is causing the problem.