hexagon logo
Register Sign in
  • Replies 5 replies
  • Subscribers 33 subscribers
  • Views 129 views
  • Users 0 members are here
Options
Related

New Cmm/pc-dmis Guinea Pig

THE ROOKIE
HELLO ALL , I AM CALLED THE ROOKIE FOR OBVIOUS REASONS, I NEVER RAN A CMM/ PC-DMIS OR POSTED ON A FORUM BEFORE BUT I HAVE READ ALOT OF THE THREADS ON THIS SITE. I WILL BE IN DESPARATE NEED FROM THE PORTABLE PC-DMIS GURU'S. I,M THE ONE MY COMPANY CHOSE TO BE THE ROMER/CMM "EXPERT" SO EITHER THEY LIKE ME OR I'LL BE LOOKING FOR WORK SOON! LMAO! HAVING NO EXPERIENCE AT ALL I WILL PROBABLY HAVE SOME REALLY ENTERTAINING QUESTIONS. SO HOLD ONTO YUR BEERS HERE COMES DUMB ? #1 WHERE IS THE BEST PLACE TO GET THE BASICS ONLINE (FREE)?
YOUR SACRIFICE TO THE PC-DMIS GODS. Astonished
  • Get the latest version of PC-DMIS installed (version 4.2 MR1) . With that version, there is a supplied PORTABLE TUTORIAL which is a very nice guide for arms using PC-DMIS. If the tutorials are not there, contact your Romer/PC-DMIS rep, as this should be programmed in every romer portlock.

    Stu
  • Getting Up To Speed

    Thanks ,
    I Do Have That Version Of Pc-dmis 4.2 Mr1. I Will Look For That Tutorial. I Have One Day Of Training Coming Up On The 15th From The Vendor So I Want To Be As Informed As I Can. From All The Threads I Have Seen This Does Seem To Be One Of The Better Versions.:d
  • Thanks ,
    I Do Have That Version Of Pc-dmis 4.2 Mr1. I Will Look For That Tutorial. I Have One Day Of Training Coming Up On The 15th From The Vendor So I Want To Be As Informed As I Can. From All The Threads I Have Seen This Does Seem To Be One Of The Better Versions.:d

    Well the CMM Gods are hereSunglasses Make sure what ever training you get is on one of your own parts with CAD and one that is typical of what you will doing. If you do not understand something, do not let him blow you off. Do not let him leave until you can Start, create and Dimenion a Report. None of this We Well get back to that. If he does say that write it down and do not let him leave until you covered all the " Get Back To's"
  • Thanks Stu And Paul ,
    I'm Reading The Tutorials Now (very Helpful) And The Reason Our Company Bought The Romer Is For Checking Close Tolerance Flatness On Steam Turbine Flanges In The Field And In The Shop (usually They Are Pretty Large From 12" Dia/square To 100" Dia/square Gasket Surfaces. But Since They Gave Me The Run Of The Equipment I Want To Be Able To Use All The Capabilities We Now Have.
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement