Apparently you have a list of points that someone wants checked?? If this is the case, you can either type them in or you can enter them into an XYZIJK text file format and load that in. Either way someone is going to type them.
thanks for your help. Do you have to make the CAD model a solid or wireframe to select features. And yes, I do need additional training (something that I am working on). Are there any good instructional books that you would reccomend??
AA has one relating to twelve steps. I recommend drinking HEAVY if you're going to become involved with PC-Dmis.
Wireframe will allow you to pick wire objects. Surface mode will allow you to pick surfaces. I usually get a combination of wire and surface because thats the way I get them from design.
I expect to see endpoint information when I click and what I get is a point on the line. Is there someway to select the line and always get the start and or end points of the line. And yes, drinking is an option. Thanks
In measurement you rarely want the start/end points of the line, since measuring near edges is dangerous to accuracy. What PC-DMIS will do is allow you to pick the start and end point of your line, and then measure in between. Just select close the the ends.
