V2011 : Add angles doesn't update values

I modified the calibration of star stylus that is used for calibrate CMM-V angles. I calibrate this new set parameters. When I "add angles" in the CMM-V probe window, the calibration date doesn't change.
I tried to delete star stylus results, and reccreate one, but nothing happens...

JEFMAN over 11 years ago

This problem is still present in 2012MR1... For updating values, you have to delete all angles, calibrate A0B0, then add angles...
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
JEFMAN over 10 years ago

Also in 2013 MR1...
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
JEFMAN over 10 years ago

2013 MR1 SP3... Delete angles is not enough, you just have to kill the cmm_ve.prb, then recreate it, calibrate optics, focus, and offsets, and it works...
Just an afternoon lost...
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
NeilRyan over 10 years ago

Hi,

If I have understood your problem correctly, I have been unable to replicate this issue in 2013 Mr1 or 2014. When I Add Angles to the CMMVE probe file and select the star probe file, all angles are added correctly.

If i then modify the star probe file & recalibrate and Add Angles to CMMVE probe file, it updates correctly. I tested this by making a note of the tip XYZ offsets before and after Adding angles
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
JEFMAN over 10 years ago

Ok, I can understand that you're unable to re create my problem... but the problem still exists !!! What about the date of calibration at the end of the line of each angle in your case ? And which is the parameter that makes it works for you and not for me ?????
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
NeilRyan over 10 years ago

Hi,

As for difference's between your setup and mine, are you using the default probe directory?. Please contact me directly @ neil.ryan@hexagonmetrology.com and hopefully we can track this issue down
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel