Surface Point not updating values

STARTUP    =ALIGNMENT/START,RECALL:,LIST=YES
            ALIGNMENT/END
            MODE/MANUAL
            MOVESPEED/ 100
            FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,OUTTOL, , 
            LOADPROBE/VISIO-1X
            TIP/TIP1, SHANKIJK=0, 0, 1, ANGLE=0
PNT1       =FEAT/VISION/SURFACE POINT,CARTESIAN
            THEO/<-58.879,1.341,-224.192>,<0,0,1>
            ACTL/<-58.879,1.341,-227.292>,<0,0,1>
            TARG/<-58.879,1.341,-224.192>,<0,0,1>
            SHOW FEATURE PARAMETERS=NO
            SHOW_VISION_PARAMETERS=YES
              TYPE=AUTOMATIC HIT TARGET
              MAGNIFICATION=0.993
              HIT TARGET COLOR=YELLOW,NOMINAL COLOR=GREEN
              HIT TARGET=SA1,0.863,0.863
              FOCUS=FULL,2.5,YES,4,NONE,-1,-1,-1,NO,Top Light=<OFF,28,ON>,Bottom Light=<OFF,100,ON>,Ring Light=<OFF,95,ON>
DIM LOC1= LOCATION OF POINT PNT1  UNITS=MM ,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH  HALF ANGLE=NO
AX    NOMINAL       +TOL       -TOL       MEAS        DEV     OUTTOL
X      -58.879      0.050      0.050    -58.879      0.000      0.000 ----#----
Y        1.341      0.050      0.050      1.341      0.000      0.000 ----#----
Z     -224.192      0.050      0.050   -227.292     -3.100     -3.050 <--------
END OF DIMENSION LOC1