hexagon logo
Register Sign in
  • Replies 13 replies
  • Subscribers 15 subscribers
  • Views 189 views
  • Users 0 members are here
Options
Related

How hard is it to make tranistion for CMM to vision

BKulpa
I've been working with PC-Dmis CMM for about 15 years.
I also have experience with an OGP vision system (which I hate the software) for about the same amount of time.

Can someone give me their experiences on the transition that I'm going to have going from CMM to an Optiv classic with a TP20 tactile probe and vision capabilities?
Parents
  • It's going quite well.
    I was able to get a 2 day 1 on 1 with Wagner Lee at Hexagon RI. Thank you Wangner!

    I'm up and programing with one little hickup with the tactile probe unloading, tech support is working on the problem now.

    Create an UNLOAD probe, this will be a fake probe. It does not need to be used in calibration.

    Hit Ctrl+Alt+P, and click Setup... and at the bottom of the page, there is a drop down to specify which probe should be used for unloading...select that probe.

    That should solve your problem. And when you want to switch from probe to vision, LOADPROBE/UNLOAD and then select LOADPROBE/VISION.
Reply
  • It's going quite well.
    I was able to get a 2 day 1 on 1 with Wagner Lee at Hexagon RI. Thank you Wangner!

    I'm up and programing with one little hickup with the tactile probe unloading, tech support is working on the problem now.

    Create an UNLOAD probe, this will be a fake probe. It does not need to be used in calibration.

    Hit Ctrl+Alt+P, and click Setup... and at the bottom of the page, there is a drop down to specify which probe should be used for unloading...select that probe.

    That should solve your problem. And when you want to switch from probe to vision, LOADPROBE/UNLOAD and then select LOADPROBE/VISION.
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement