How to get data Min/Max diameter of circle

Hi. I have problems, I need out put data min and max diameter (or radius) and graphic after measure circle.

Please give me some advises.

Parents

RandomJerk over 6 years ago

Turning on MAX/MIN will output the max and min diameters, but it won't evaluate them.

DIM DIM_1= LOCATION OF CIRCLE CIR1  UNITS=IN ,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH  HALF ANGLE=NO
AX    NOMINAL       +TOL       -TOL       MEAS        DEV     OUTTOL        MAX        MIN
D       2.0000     0.0050     0.0050     2.0008     0.0008     0.0000     2.0100     2.0000 -----#---
END OF DIMENSION DIM_1

If you want to evaluate them, you need to recompute them and report them separately.

CIR2       =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
            THEO/<1,0,0>,<0,0,1>,6
            ACTL/<1,0,0>,<0,0,1>,6
            TARG/<1,0,0>,<0,0,1>
            START ANG=0,END ANG=360
            ANGLE VEC=<0.7071068,0,0.7071068>
            DIRECTION=CCW
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              NUMHITS=36,DEPTH=0,PITCH=0
              SAMPLE METHOD=SAMPLE_HITS
              SAMPLE HITS=0,SPACER=0.25
              AVOIDANCE MOVE=NO,DISTANCE=0.5
              FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
            SHOW HITS=NO
SCN1       =FEAT/SET,CARTESIAN
            THEO/<1,0,0>,<0,0,1>
            ACTL/<1,0,0>,<0,0,1>
            CONSTR/SET,BASIC,CIR2.HIT[1..CIR2.NUMHITS],,
CIR3       =FEAT/CIRCLE,CARTESIAN,IN,MAX_INSC,NO
            THEO/<1,0,0>,<0,0,1>,6
            ACTL/<1,0,0>,<0,0,1>,6
            CONSTR/CIRCLE,BF,2D,SCN1,,
            OUTLIER_REMOVAL/OFF,3
            FILTER/OFF,UPR=0
CIR4       =FEAT/CIRCLE,CARTESIAN,IN,MIN_CIRCSC,NO
            THEO/<1,0,0>,<0,0,1>,6
            ACTL/<1,0,0>,<0,0,1>,6
            CONSTR/CIRCLE,BF,2D,SCN1,,
            OUTLIER_REMOVAL/OFF,3
            FILTER/OFF,UPR=0
DIM DIM_2= LOCATION OF CIRCLE CIR3  UNITS=IN ,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH  HALF ANGLE=NO
AX    NOMINAL       +TOL       -TOL       MEAS        DEV     OUTTOL
D       2.0000     0.0050     0.0050     2.0000     0.0000     0.0000 ----#----
END OF DIMENSION DIM_2
DIM DIM_3= LOCATION OF CIRCLE CIR4  UNITS=IN ,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH  HALF ANGLE=NO
AX    NOMINAL       +TOL       -TOL       MEAS        DEV     OUTTOL
D       2.0000     0.0050     0.0050     2.0100     0.0100     0.0050 -------->
END OF DIMENSION DIM_3

Reply

RandomJerk over 6 years ago

Turning on MAX/MIN will output the max and min diameters, but it won't evaluate them.

DIM DIM_1= LOCATION OF CIRCLE CIR1  UNITS=IN ,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH  HALF ANGLE=NO
AX    NOMINAL       +TOL       -TOL       MEAS        DEV     OUTTOL        MAX        MIN
D       2.0000     0.0050     0.0050     2.0008     0.0008     0.0000     2.0100     2.0000 -----#---
END OF DIMENSION DIM_1

If you want to evaluate them, you need to recompute them and report them separately.

CIR2       =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
            THEO/<1,0,0>,<0,0,1>,6
            ACTL/<1,0,0>,<0,0,1>,6
            TARG/<1,0,0>,<0,0,1>
            START ANG=0,END ANG=360
            ANGLE VEC=<0.7071068,0,0.7071068>
            DIRECTION=CCW
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              NUMHITS=36,DEPTH=0,PITCH=0
              SAMPLE METHOD=SAMPLE_HITS
              SAMPLE HITS=0,SPACER=0.25
              AVOIDANCE MOVE=NO,DISTANCE=0.5
              FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
            SHOW HITS=NO
SCN1       =FEAT/SET,CARTESIAN
            THEO/<1,0,0>,<0,0,1>
            ACTL/<1,0,0>,<0,0,1>
            CONSTR/SET,BASIC,CIR2.HIT[1..CIR2.NUMHITS],,
CIR3       =FEAT/CIRCLE,CARTESIAN,IN,MAX_INSC,NO
            THEO/<1,0,0>,<0,0,1>,6
            ACTL/<1,0,0>,<0,0,1>,6
            CONSTR/CIRCLE,BF,2D,SCN1,,
            OUTLIER_REMOVAL/OFF,3
            FILTER/OFF,UPR=0
CIR4       =FEAT/CIRCLE,CARTESIAN,IN,MIN_CIRCSC,NO
            THEO/<1,0,0>,<0,0,1>,6
            ACTL/<1,0,0>,<0,0,1>,6
            CONSTR/CIRCLE,BF,2D,SCN1,,
            OUTLIER_REMOVAL/OFF,3
            FILTER/OFF,UPR=0
DIM DIM_2= LOCATION OF CIRCLE CIR3  UNITS=IN ,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH  HALF ANGLE=NO
AX    NOMINAL       +TOL       -TOL       MEAS        DEV     OUTTOL
D       2.0000     0.0050     0.0050     2.0000     0.0000     0.0000 ----#----
END OF DIMENSION DIM_2
DIM DIM_3= LOCATION OF CIRCLE CIR4  UNITS=IN ,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH  HALF ANGLE=NO
AX    NOMINAL       +TOL       -TOL       MEAS        DEV     OUTTOL
D       2.0000     0.0050     0.0050     2.0100     0.0100     0.0050 -------->
END OF DIMENSION DIM_3

Children

No Data