Your Products have been synced, click here to refresh
Ok I forgot the code for this and what I looked up in the search has not worked thus far.
V3.7 MR3
9-12-9 Xcel
Shapre 32 Controller
I tried a couple different combinations but I could not get my input comment to pass to my tracefield.
Here is what I have tried
C1 = COMMENT/INPUT,YES,'ROUTE #'
TRACEFILED/NO_DISPLAY,LIMIT=15; : C1.INPUT
C1 = COMMENT/INPUT,YES,'ROUTE #'
TRACEFILED/NO_DISPLAY,LIMIT=15; : +C1.INPUT
I also tried passing the input comment to a variable then to the tracefiled.
C1 = COMMENT/INPUT,YES,'ROUTE #'
ASSIGN/V1, C1.INPUT
TRACEFILED/NO_DISPLAY,LIMIT=15; : V1
C1 = COMMENT/INPUT,YES,'ROUTE #'
ASSIGN/V1, C1.INPUT
TRACEFILED/NO_DISPLAY,LIMIT=15; : +V1
TIA
Ok I forgot the code for this and what I looked up in the search has not worked thus far.
V3.7 MR3
9-12-9 Xcel
Shapre 32 Controller
I tried a couple different combinations but I could not get my input comment to pass to my tracefield.
Here is what I have tried
C1 = COMMENT/INPUT,YES,'ROUTE #'
TRACEFILED/NO_DISPLAY,LIMIT=15; : C1.INPUT
C1 = COMMENT/INPUT,YES,'ROUTE #'
TRACEFILED/NO_DISPLAY,LIMIT=15; : +C1.INPUT
I also tried passing the input comment to a variable then to the tracefiled.
C1 = COMMENT/INPUT,YES,'ROUTE #'
ASSIGN/V1, C1.INPUT
TRACEFILED/NO_DISPLAY,LIMIT=15; : V1
C1 = COMMENT/INPUT,YES,'ROUTE #'
ASSIGN/V1, C1.INPUT
TRACEFILED/NO_DISPLAY,LIMIT=15; : +V1
TIA
© 2024 Hexagon AB and/or its subsidiaries. | Privacy Policy | Cloud Services Agreement |