Your Products have been synced, click here to refresh
How is an external alignment made and what is it used for? I have never used them but I keep hearing about how useful they are. I use read points but only at the start of my programs for "Read Point Alignment".
I have heard that the external alignment is great when you have a lot of odd tip angles that while the program is running is at risk of knocking the probe off; so the external alignment well take the probe to have save place to rotate to the tip angle and then designate to the next feature to be measured. Is this an accurate statement and if so I do I make external alignments? I work in Aerospace and we have a need for a routine like that.
Thanks,
CMMGUY13
How is an external alignment made and what is it used for? I have never used them but I keep hearing about how useful they are. I use read points but only at the start of my programs for "Read Point Alignment".
I have heard that the external alignment is great when you have a lot of odd tip angles that while the program is running is at risk of knocking the probe off; so the external alignment well take the probe to have save place to rotate to the tip angle and then designate to the next feature to be measured. Is this an accurate statement and if so I do I make external alignments? I work in Aerospace and we have a need for a routine like that.
Thanks,
CMMGUY13
© 2024 Hexagon AB and/or its subsidiaries. | Privacy Policy | Cloud Services Agreement |