This will stop the operators from running parts too hot or too cold.

COMMENT/OPER,NO,PLACE PART TEMPERATURE SENSOR ON THE PART

TEMPCOMP/ORIGIN=0,0,0,Material Coeff=0.000015,Reference Temp=20
,Hi Threshold=35,Lo Threshold=15,Sensor num=4
,X Axis Temp=,Y Axis Temp=,Z Axis Temp=,Part Temp=21.295
ASSIGN/WWW1 = GETCOMMAND(62,"Up",1)
ASSIGN/PARTTEMP1 = LEFT(GETTEXT(532,0,WWW1),5)
IF_GOTO/PARTTEMP1<18.88,GOTO = THE_END
IF_GOTO/PARTTEMP1>22.25,GOTO = THE_END

THE_END =LABEL/

Parents

tking over 12 years ago

COMMENT/OPER,NO,PLACE PART TEMPERATURE SENSOR ON THE PART

TEMPCOMP/ORIGIN=0,0,0,Material Coeff=0.000015,Reference Temp=20
,Hi Threshold=35,Lo Threshold=15,Sensor num=4
,X Axis Temp=,Y Axis Temp=,Z Axis Temp=,Part Temp=21.295
ASSIGN/WWW1 = GETCOMMAND(62,"Up",1)
ASSIGN/PARTTEMP1 = LEFT(GETTEXT(532,0,WWW1),5)
IF_GOTO/PARTTEMP1<18.88,GOTO = THE_END
IF_GOTO/PARTTEMP1>22.25,GOTO = THE_END



THE_END =LABEL/

Trying the code tags.................hey it works!

Reply

tking over 12 years ago

COMMENT/OPER,NO,PLACE PART TEMPERATURE SENSOR ON THE PART

TEMPCOMP/ORIGIN=0,0,0,Material Coeff=0.000015,Reference Temp=20
,Hi Threshold=35,Lo Threshold=15,Sensor num=4
,X Axis Temp=,Y Axis Temp=,Z Axis Temp=,Part Temp=21.295
ASSIGN/WWW1 = GETCOMMAND(62,"Up",1)
ASSIGN/PARTTEMP1 = LEFT(GETTEXT(532,0,WWW1),5)
IF_GOTO/PARTTEMP1<18.88,GOTO = THE_END
IF_GOTO/PARTTEMP1>22.25,GOTO = THE_END



THE_END =LABEL/

Trying the code tags.................hey it works!

Children

No Data