hexagon logo
Register Sign in
  • Replies 36 replies
  • Subscribers 22 subscribers
  • Views 654 views
  • Users 0 members are here
Options
Related

Scripting

KIRBSTER269
Alright folks, I'm getting there but not quite. So I have a very small area, and a callout of a position and this area is a Radius. Now I took 4 Polar Radius hits, and Created Assignment Shown below 


ASSIGN/V1=(PNT46.PR+PNT47.PR+PNT1.PR+PNT48.PR)/4
F1         =GENERIC/CIRCLE,DEPENDENT,CARTESIAN,OUT,$
            NOM/XYZ,<0,0,0>,$
            MEAS/XYZ,<0,0,0>,$
            NOM/IJK,<0,0,1>,$
            MEAS/IJK,<0,0,1>,$
            RADIUS/6,V1

Now my nominal is fine 0,0,0 center of the part. Can't create a constructed circle. Really crappy numbers. But I know I have have to create something based off of those points to fill in my measured results in that generic circle. need a little help here. Hope This is something easy. , ,

suggestions?
Parents


  • Out of those four hits, maybe construct a Fixed Radius circle using your V1 measurement as your diameter. Then your Fixed Radius X and Y measured location would be the location of F1.

    Something like this: 

    PNT1 =FEAT/CONTACT/VECTOR POINT/DEFAULT,POLAR
THEO/<6,0,0>,<1,0,0>
ACTL/<6,0,0>,<1,0,0>
TARG/<6,0,0>,<1,0,0>
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
PNT2 =FEAT/CONTACT/VECTOR POINT/DEFAULT,POLAR
THEO/<6,30,0>,<0.8660254,0.5,0>
ACTL/<6,30,0>,<0.8660254,0.5,0>
TARG/<6,30,0>,<0.8660254,0.5,0>
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
PNT3 =FEAT/CONTACT/VECTOR POINT/DEFAULT,POLAR
THEO/<6,60,0>,<0.5,0.8660254,0>
ACTL/<6,60,0>,<0.5,0.8660254,0>
TARG/<6,60,0>,<0.5,0.8660254,0>
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
PNT4 =FEAT/CONTACT/VECTOR POINT/DEFAULT,POLAR
THEO/<6,90,0>,<0,1,0>
ACTL/<6,90,0>,<0,1,0>
TARG/<6,90,0>,<0,1,0>
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
ASSIGN/V1=((PNT1.PR+PNT2.PR+PNT3.PR+PNT4.PR)/4)*2
CIR1 =FEAT/CIRCLE,CARTESIAN,OUT,FIXED_RAD,YES
THEO/<0+0,0+0,0+0>,<0,0,1>,V1
ACTL/<0,0,0>,<0,0,1>,12
CONSTR/CIRCLE,BF,2D,PNT1,PNT2,PNT3,PNT4,,
OUTLIER_REMOVAL/OFF,3
FILTER/OFF,UPR=0
[COLOR=#B22222][B]F1 =GENERIC/CIRCLE,DEPENDENT,CARTESIAN,OUT,$            
NOM/XYZ,<0+0,0+0,0+0>,$            
MEAS/XYZ,<CIR1.X,CIR1.Y,0+0>,$            
NOM/IJK,<0,0,1>,$            
MEAS/IJK,<0,0,1>,$            
RADIUS/6,CIR1.R[/B][/COLOR]


    See above in Red.
  • in reply to bfire85
    Glad to help! Great to see you are still hanging around the forums! Good luck in the playoffs!
Reply Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement