hexagon logo
Register Sign in
  • Replies 31 replies
  • Subscribers 24 subscribers
  • Views 1144 views
  • Users 0 members are here
Options
Related

More Generic Function Example

Dave Hocum
Construct Features Hits Function

Here is an example on how to use functions to simplify the syntax when typing in the commands for a Constructed Circle from two Auto Circles.

If you have two Auto Circles named CIR1 and CIR2 then you would have to use the syntax CIR1.HIT[1..CIR1.NUMHITS],CIR2.HIT[1..CIR2.NUMHITS] for the Constructed Circle.

With this Function example

ASSIGN/PAR_ALLHITS1=".HIT[1.."
ASSIGN/PAR_ALLHITS2=".NUMHITS]"
ASSIGN/ALLHITS=FUNCTION((IDA),(IDA)+PAR_ALLHITS1+(IDA)+PAR_ALLHITS2)

All you have to type in is ALLHITS("CIR1"),ALLHITS("CIR2")

Code example 
ASSIGN/PAR_ALLHITS1=".HIT[1.."
ASSIGN/PAR_ALLHITS2=".NUMHITS]"
ASSIGN/ALLHITS=FUNCTION((IDA),(IDA)+PAR_ALLHITS1+(IDA)+PAR_ALLHITS2)
CIR1 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<4.291,3.5036,0>,<0,0,1>,0.6457
ACTL/<4.291,3.5036,0>,<0,0,1>,0.6457
TARG/<4.291,3.5036,0>,<0,0,1>
START ANG=0,END ANG=360
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
CIR2 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<4.291,3.5036,-0.7874>,<0,0,1>,0.6457
ACTL/<4.291,3.5036,-0.7874>,<0,0,1>,0.6457
TARG/<4.291,3.5036,-0.7874>,<0,0,1>
START ANG=0,END ANG=360
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
CIR5 =FEAT/CIRCLE,CARTESIAN,IN,LEAST_SQR,NO
THEO/<4.291,3.5036,-0.3937>,<0,0,1>,0.6457
ACTL/<4.291,3.5036,-0.3937>,<0,0,1>,0.6457
CONSTR/CIRCLE,BFRE,2D,ALLHITS("CIR1"),ALLHITS("CIR2"),,
OUTLIER_REMOVAL/OFF,3
FILTER/OFF,UPR=0
CIR3 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<3.1496,2.3622,0>,<0,0,1>,2.3622
ACTL/<3.1496,2.3622,0>,<0,0,1>,2.3622
TARG/<3.1496,2.3622,0>,<0,0,1>
START ANG=0,END ANG=360
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
CIR4 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<3.1496,2.3622,-0.7874>,<0,0,1>,2.3622
ACTL/<3.1496,2.3622,-0.7874>,<0,0,1>,2.3622
TARG/<3.1496,2.3622,-0.7874>,<0,0,1>
START ANG=0,END ANG=360
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
CIR6 =FEAT/CIRCLE,CARTESIAN,IN,LEAST_SQR,NO
THEO/<3.1496,2.3622,-0.3937>,<0,0,1>,2.3622
ACTL/<3.1496,2.3622,-0.3937>,<0,0,1>,2.3622
CONSTR/CIRCLE,BFRE,2D,ALLHITS("CIR3"),ALLHITS("CIR4"),,
OUTLIER_REMOVAL/OFF,3
FILTER/OFF,UPR=0
Parents
  • Construct Features Hits Function

    Here is an example on how to use functions to simplify the syntax when typing in the commands for a Constructed Circle from two Auto Circles.

    If you have two Auto Circles named CIR1 and CIR2 then you would have to use the syntax CIR1.HIT[1..CIR1.NUMHITS],CIR2.HIT[1..CIR2.NUMHITS] for the Constructed Circle.

    With this Function example

    ASSIGN/PAR_ALLHITS1=".HIT[1.."
    ASSIGN/PAR_ALLHITS2=".NUMHITS]"
    ASSIGN/ALLHITS=FUNCTION((IDA),(IDA)+PAR_ALLHITS1+(IDA)+PAR_ALLHITS2)

    All you have to type in is ALLHITS("CIR1"),ALLHITS("CIR2")

    Code example 
    ASSIGN/PAR_ALLHITS1=".HIT[1.."
ASSIGN/PAR_ALLHITS2=".NUMHITS]"
ASSIGN/ALLHITS=FUNCTION((IDA),(IDA)+PAR_ALLHITS1+(IDA)+PAR_ALLHITS2)
CIR1 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<4.291,3.5036,0>,<0,0,1>,0.6457
ACTL/<4.291,3.5036,0>,<0,0,1>,0.6457
TARG/<4.291,3.5036,0>,<0,0,1>
START ANG=0,END ANG=360
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
CIR2 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<4.291,3.5036,-0.7874>,<0,0,1>,0.6457
ACTL/<4.291,3.5036,-0.7874>,<0,0,1>,0.6457
TARG/<4.291,3.5036,-0.7874>,<0,0,1>
START ANG=0,END ANG=360
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
CIR5 =FEAT/CIRCLE,CARTESIAN,IN,LEAST_SQR,NO
THEO/<4.291,3.5036,-0.3937>,<0,0,1>,0.6457
ACTL/<4.291,3.5036,-0.3937>,<0,0,1>,0.6457
CONSTR/CIRCLE,BFRE,2D,ALLHITS("CIR1"),ALLHITS("CIR2"),,
OUTLIER_REMOVAL/OFF,3
FILTER/OFF,UPR=0
CIR3 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<3.1496,2.3622,0>,<0,0,1>,2.3622
ACTL/<3.1496,2.3622,0>,<0,0,1>,2.3622
TARG/<3.1496,2.3622,0>,<0,0,1>
START ANG=0,END ANG=360
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
CIR4 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<3.1496,2.3622,-0.7874>,<0,0,1>,2.3622
ACTL/<3.1496,2.3622,-0.7874>,<0,0,1>,2.3622
TARG/<3.1496,2.3622,-0.7874>,<0,0,1>
START ANG=0,END ANG=360
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
CIR6 =FEAT/CIRCLE,CARTESIAN,IN,LEAST_SQR,NO
THEO/<3.1496,2.3622,-0.3937>,<0,0,1>,2.3622
ACTL/<3.1496,2.3622,-0.3937>,<0,0,1>,2.3622
CONSTR/CIRCLE,BFRE,2D,ALLHITS("CIR3"),ALLHITS("CIR4"),,
OUTLIER_REMOVAL/OFF,3
FILTER/OFF,UPR=0


    Hi Dave, how did you attach the codes? it looks good. Slight smile
Reply
  • Construct Features Hits Function

    Here is an example on how to use functions to simplify the syntax when typing in the commands for a Constructed Circle from two Auto Circles.

    If you have two Auto Circles named CIR1 and CIR2 then you would have to use the syntax CIR1.HIT[1..CIR1.NUMHITS],CIR2.HIT[1..CIR2.NUMHITS] for the Constructed Circle.

    With this Function example

    ASSIGN/PAR_ALLHITS1=".HIT[1.."
    ASSIGN/PAR_ALLHITS2=".NUMHITS]"
    ASSIGN/ALLHITS=FUNCTION((IDA),(IDA)+PAR_ALLHITS1+(IDA)+PAR_ALLHITS2)

    All you have to type in is ALLHITS("CIR1"),ALLHITS("CIR2")

    Code example 
    ASSIGN/PAR_ALLHITS1=".HIT[1.."
ASSIGN/PAR_ALLHITS2=".NUMHITS]"
ASSIGN/ALLHITS=FUNCTION((IDA),(IDA)+PAR_ALLHITS1+(IDA)+PAR_ALLHITS2)
CIR1 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<4.291,3.5036,0>,<0,0,1>,0.6457
ACTL/<4.291,3.5036,0>,<0,0,1>,0.6457
TARG/<4.291,3.5036,0>,<0,0,1>
START ANG=0,END ANG=360
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
CIR2 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<4.291,3.5036,-0.7874>,<0,0,1>,0.6457
ACTL/<4.291,3.5036,-0.7874>,<0,0,1>,0.6457
TARG/<4.291,3.5036,-0.7874>,<0,0,1>
START ANG=0,END ANG=360
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
CIR5 =FEAT/CIRCLE,CARTESIAN,IN,LEAST_SQR,NO
THEO/<4.291,3.5036,-0.3937>,<0,0,1>,0.6457
ACTL/<4.291,3.5036,-0.3937>,<0,0,1>,0.6457
CONSTR/CIRCLE,BFRE,2D,ALLHITS("CIR1"),ALLHITS("CIR2"),,
OUTLIER_REMOVAL/OFF,3
FILTER/OFF,UPR=0
CIR3 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<3.1496,2.3622,0>,<0,0,1>,2.3622
ACTL/<3.1496,2.3622,0>,<0,0,1>,2.3622
TARG/<3.1496,2.3622,0>,<0,0,1>
START ANG=0,END ANG=360
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
CIR4 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<3.1496,2.3622,-0.7874>,<0,0,1>,2.3622
ACTL/<3.1496,2.3622,-0.7874>,<0,0,1>,2.3622
TARG/<3.1496,2.3622,-0.7874>,<0,0,1>
START ANG=0,END ANG=360
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
CIR6 =FEAT/CIRCLE,CARTESIAN,IN,LEAST_SQR,NO
THEO/<3.1496,2.3622,-0.3937>,<0,0,1>,2.3622
ACTL/<3.1496,2.3622,-0.3937>,<0,0,1>,2.3622
CONSTR/CIRCLE,BFRE,2D,ALLHITS("CIR3"),ALLHITS("CIR4"),,
OUTLIER_REMOVAL/OFF,3
FILTER/OFF,UPR=0


    Hi Dave, how did you attach the codes? it looks good. Slight smile
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement