hexagon logo
Register Sign in
  • Replies 5 replies
  • Subscribers 25 subscribers
  • Views 300 views
  • Users 0 members are here
Options
Related

3d curve

Parrish Dial

Can you scan a 3d curve with pc dmis ? 2d linear open or close doesnt follow the cad and i need it to lol...any help would be greatly apreciated

Parents

  • it could be due to the way you are creating the scan.  if it is a flat scan you are needing, then YOU need to do some typing after you click on the cad model.  You need to set the 'height' to all the same value and you need to check (and correct, if needed) the cut plane so that it is flat & square to the path you want, otherwise it will drift away from the model/part.

Reply

  • it could be due to the way you are creating the scan.  if it is a flat scan you are needing, then YOU need to do some typing after you click on the cad model.  You need to set the 'height' to all the same value and you need to check (and correct, if needed) the cut plane so that it is flat & square to the path you want, otherwise it will drift away from the model/part.

Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement