Why can't you write programs like this? Do you understand?

Hello

I tested it with 2023.2 and surprisingly it works well.

            WORKPLANE/YMINUS
            ASSIGN/V_COUNT=8
            MOVE/CLEARPLANE
V1         =LOOP/START,ID=YES,NUMBER=V_COUNT,START=1,SKIP=,
              OFFSET:XAXIS=0,YAXIS=0,ZAXIS=0,ANGLE=45
PNT1         =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
              THEO/<0,0,50>,<0,-1,0>
              ACTL/<0,0,50>,<0,-1,0>
              TARG/<0,0,50>,<0,-1,0>
              SNAP=NO
              SHOW FEATURE PARAMETERS=NO
              SHOW CONTACT PARAMETERS=NO
            LOOP/END
EB1        =FEAT/PLANE,CARTESIAN,OUTLINE,NO,LEAST_SQR
            THEO/<4.419,0,1.831>,<0,-1,0>
            ACTL/<0,0,0>,<0,-1,0>
            CONSTR/PLANE,BF,PNT1[1..V_COUNT],,
            OUTLIER_REMOVAL/OFF,3
            FILTER/OFF,WAVELENGTH=0

the question is about a loop index and not about the points from the element, hence without .hit
I can only assume that ..12 is the wrong number and pkt1[12] does not exist

or buggy in 2024.1

Brother, I saw it

Brother, I saw it