after replacing the computer and install Quindos on it(7.6.11333-RC-8) I have a problem. Can you support me?
e.g: I use cycle for calibration-
AZ_(1)=0
AZ_(2)=90
AZ_(3)=180
AZ_(4)=-90
B_(1)=0
B_(2)=90
B_(3)=180
B_(4)=270
DO (NAM=V, BGN=1, END=4, DLT=1)
QualifyTool (NAM=PRB_SPH_DIA_2_A90_B(B_(V)), DIA=2.000, REF=CER_SPHERE, AZI=AZ_(V), HTY=PH9, SNT=TP2, DEL=N, GEO=SPH, PHA=90.0, PHB=B_(V))
ENDDO
during change of head angle (A or B) quindos displays message :"Manually remove probe" before which CMM automatically change angle A to 0 ( it is can kill the sensor :blah
. I push done on the JB or click on message by mouse. Then quindos displays next message: "Manually mount new probe" after which CMM change angle of head to correctly angle.
How I can solve this problem?
The same problem when I use command USEPRB in the cnc program
CMM : SCIROCCO 210
HEAD: PHC10-2
SENSOR:TP200
NIkolay
