during change of head angle (A or B) quindos displays message :"Manually remove probe" before which CMM automatically change angle A to 0 ( it is can kill the sensor :blah. I push done on the JB or click on message by mouse. Then quindos displays next message: "Manually mount new probe" after which CMM change angle of head to correctly angle.
How I can solve this problem?
The same problem when I use command USEPRB in the cnc program
I suspect you have a registry setting not set correctly, specifically the 'wrist' registry setting(s)
To assist debugging, you'd have to list your Windows registry settings for HKEY_CURRENT_USER\Software\MTWz\Quindos7\Environments\<your environment>\<your machine>\Wrist
You can contact Hexagon in Europe, or contact us in USA
At same time, Q7.11333 is a 'bit' old (333rd day of 2011).
I suspect you have a registry setting not set correctly, specifically the 'wrist' registry setting(s)
To assist debugging, you'd have to list your Windows registry settings for HKEY_CURRENT_USER\Software\MTWz\Quindos7\Environments\<your environment>\<your machine>\Wrist
You can contact Hexagon in Europe, or contact us in USA
At same time, Q7.11333 is a 'bit' old (333rd day of 2011).