Excel comand in Quindos 2020.1

cris200385 over 3 years ago

Hi everybody .
I Need help for use "Excel" comand in Quindos 2020.1.
Has Someone tried this comand ?
There Is an example for read or write value into a Cell? I dont understand how setting the command .

Thanks.
Cristian

Parents

Hribe85 over 3 years ago

Hello

I have something for you on this subject.
Variable for a shaft that was defined and read via Excel for measuring the shaft via the Y-axis

Excel file

XCO	YCO	ZCO	DIA	LEN	OFS	OT	UT	FORM	GD&T
0,000	0,000	0,000	120,000	-110,000	5,000	0,080	0,050	0,020		Merkmal 1
0,000	-120,000	0,000	140,000	-180,000	5,000	0,080	0,050	0,020		Merkmal 2

!--------------------------------------------------------------
! Quindos 7 Excel input datei
!--------------------------------------------------------------
~WorkBook = F:\Quindos7lib\Programme\5.231592.K\EXCEL DATEN\Variablen_Shaft.xlsx
~WorkSheet = Tabelle1
~Visible = Y
!--------------------------------------------------------------
! open the Excel file
!--------------------------------------------------------------
Excel (ACT=Open, VIS=~Visible, WBK=~WorkBook, SAV=Y)
Excel (ACT=Open, VIS=~Visible, WBK=~WorkBook, WSH=~WorkSheet)
!--------------------------------------------------------------
S=1
!Num=10
!************************************************* ************************************************** *************
!ELE 1 ----------------------------------------------------------------------------------------------------------
DO (NAM=K, BGN=S, END=Num, DLT=1)
If (BXP=REA:S==1)
Excel (ACT=Read, VIS=~Visible, WBK=~WorkBook, WSH=~WorkSheet, RNG=A4, SAV=Y, OBJ=XCO(K))
Excel (ACT=Read, VIS=~Visible, WBK=~WorkBook, WSH=~WorkSheet, RNG=B4, SAV=Y, OBJ=YCO(K))
Excel (ACT=Read, VIS=~Visible, WBK=~WorkBook, WSH=~WorkSheet, RNG=C4, SAV=Y, OBJ=ZCO(K))
Excel (ACT=Read, VIS=~Visible, WBK=~WorkBook, WSH=~WorkSheet, RNG=D4, SAV=Y, OBJ=DIA(K))
Excel (ACT=Read, VIS=~Visible, WBK=~WorkBook, WSH=~WorkSheet, RNG=E4, SAV=Y, OBJ=LEN(K))
Excel (ACT=Read, VIS=~Visible, WBK=~WorkBook, WSH=~WorkSheet, RNG=F4, SAV=Y, OBJ=OFS(K))
Excel (ACT=Read, VIS=~Visible, WBK=~WorkBook, WSH=~WorkSheet, RNG=G4, SAV=Y, OBJ=OT(K))
Excel (ACT=Read, VIS=~Visible, WBK=~WorkBook, WSH=~WorkSheet, RNG=H4, SAV=Y, OBJ=UT(K))
Excel (ACT=Read, VIS=~Visible, WBK=~WorkBook, WSH=~WorkSheet, RNG=I4, SAV=Y, OBJ=FORM(K))
Excel (ACT=Read, VIS=~Visible, WBK=~WorkBook, WSH=~WorkSheet, RNG=J4, SAV=Y, OBJ=GDT(K))
!ELE 2 ----------------------------------------------------------------------------------------------------------
S=2
!DO (NAM=K, BGN=K, END=K, DLT=1)
ElseIf (BXP=REA:S==2)
Excel (ACT=Read, VIS=~Visible, WBK=~WorkBook, WSH=~WorkSheet, RNG=A5, SAV=Y, OBJ=XCO(K))
Excel (ACT=Read, VIS=~Visible, WBK=~WorkBook, WSH=~WorkSheet, RNG=B5, SAV=Y, OBJ=YCO(K))
Excel (ACT=Read, VIS=~Visible, WBK=~WorkBook, WSH=~WorkSheet, RNG=C5, SAV=Y, OBJ=ZCO(K))
Excel (ACT=Read, VIS=~Visible, WBK=~WorkBook, WSH=~WorkSheet, RNG=D5, SAV=Y, OBJ=DIA(K))
Excel (ACT=Read, VIS=~Visible, WBK=~WorkBook, WSH=~WorkSheet, RNG=E5, SAV=Y, OBJ=LEN(K))
Excel (ACT=Read, VIS=~Visible, WBK=~WorkBook, WSH=~WorkSheet, RNG=F5, SAV=Y, OBJ=OFS(K))
Excel (ACT=Read, VIS=~Visible, WBK=~WorkBook, WSH=~WorkSheet, RNG=G5, SAV=Y, OBJ=OT(K))
Excel (ACT=Read, VIS=~Visible, WBK=~WorkBook, WSH=~WorkSheet, RNG=H5, SAV=Y, OBJ=UT(K))
Excel (ACT=Read, VIS=~Visible, WBK=~WorkBook, WSH=~WorkSheet, RNG=I5, SAV=Y, OBJ=FORM(K))
Excel (ACT=Read, VIS=~Visible, WBK=~WorkBook, WSH=~WorkSheet, RNG=J5, SAV=Y, OBJ=GDT(K))
!ELE 3 ----------------------------------------------------------------------------------------------------------
EndIf
ENDDO
!STOP
! close file
Excel (ACT=CloseAll, WBK=~WorkBook)
!--------------------------------------------------------------
!STOP Start der Messung
DO (NAM=I, BGN=1, END=2, DLT=1)
GENCYL (NAM=A(I), XCO=XCO(I), YCO=YCO(I), ZCO=ZCO(I), DIA=DIA(I), NPT=NPT(I), PLA=ZX, INO=O, MIP=MIP, MXP=MXP, PDI=PRBDIA, LEN=LEN(I), NPL=NPL(I), DEL=Y, OFS=OFS(I)+2)
MECYL (NAM=A(I), ITY=CY2)
GetDMEPos (XPO=X, YPO=Y, ZPO=Z)
MOVCMM (TYP=ABS, DST=((DIA(I)/2)+(PRBDIA*2)+20,Y,Z))
ENDDO

Best regards
Michael

Reply

Hribe85 over 3 years ago

Hello

I have something for you on this subject.
Variable for a shaft that was defined and read via Excel for measuring the shaft via the Y-axis

Excel file

XCO	YCO	ZCO	DIA	LEN	OFS	OT	UT	FORM	GD&T
0,000	0,000	0,000	120,000	-110,000	5,000	0,080	0,050	0,020		Merkmal 1
0,000	-120,000	0,000	140,000	-180,000	5,000	0,080	0,050	0,020		Merkmal 2

Children

No Data