hexagon logo
Register Sign in
  • Replies 3 replies
  • Subscribers 15 subscribers
  • Views 101 views
  • Users 0 members are here
Options
Related

Interpreting Coaxty output

zcases
I am trying to interpret some information from our inspection dept. What I have is the Quindos output for measurements on two bushing ID's. What it boils down to is an X and a Z offset, and a coaxty value that I cannot make any sense of. It is not just the hypotenuse of the X and Z offsets........is it a TIR value based on projection of the two axes to a common point?

Thanks
Scott
Parents
  • Coaxty

    Confused are you asking about Coaxiality, if so it is the same as concentricity only comparing the axles of 2 cylinders enstead of two diameters they are both concerned with two features being on the same axis to a certian tolerance
    TIR is a axis to suface measurement, coaxiality and concentricity are a axis to axis measurement
    I hope this helps and doesn't create more confusion
Reply
  • Coaxty

    Confused are you asking about Coaxiality, if so it is the same as concentricity only comparing the axles of 2 cylinders enstead of two diameters they are both concerned with two features being on the same axis to a certian tolerance
    TIR is a axis to suface measurement, coaxiality and concentricity are a axis to axis measurement
    I hope this helps and doesn't create more confusion
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement