I'm hoping someone can help. I have been using and programming PC-DMIS for about a year and my company is thinking of buying a Wenzel, which uses Open DMIS, instead of the B&S that I want. Does anybody know anything about the machine or software? Any help would be appreciated.
CMMTalk is dead forever near as I can tell. I hate to say it, but the real answer is there is no OpenDMIS forum, and not enough users to support one. Support will be difficult to come by for that machine. Good luck convincing your bosses. Make sure your sales representative is involved if you want to stick with PC-DMIS.
there is a site called CMM talk that had some forums for Open Dmis. i just googled it to see if they were still around and says the site is under going maintenance. its been a few years since i have looked at that site, not sure how long it will be down? but might be worth it to check back.
CMMTalk is dead forever near as I can tell. I hate to say it, but the real answer is there is no OpenDMIS forum, and not enough users to support one. Support will be difficult to come by for that machine. Good luck convincing your bosses. Make sure your sales representative is involved if you want to stick with PC-DMIS.
there is a site called CMM talk that had some forums for Open Dmis. i just googled it to see if they were still around and says the site is under going maintenance. its been a few years since i have looked at that site, not sure how long it will be down? but might be worth it to check back.
