Export your stuff from PC-DMIS as a Text file. This is just an example of things you have to put in the Demon Comment/Report .[balloon number]
positions Require a little more info. You can see on the bottom one balloon number identification DF= Diameter feature, Y= axis <the basic number if you want. Z=axis<same as Y
35=Position
[COLOR=#2980b9] COMMENT/REPT,
.[4][/COLOR]
DIM LOC5= LOCATION OF PLANE PLN3 UNITS=IN ,$
GRAPH=OFF TEXT=OFF MULT=20.00 OUTPUT=BOTH HALF ANGLE=NO
AX NOMINAL MEAS +TOL -TOL OUTTOL DEV MAX MIN
Z 0.1130 0.1128 0.0030 0.0030 0.0000 -0.0002 0.1129 0.1126 --------#---------
END OF DIMENSION LOC5
LIN3 =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
THEO/<1.5,0,0.113>,<0,1,0>
ACTL/<1.5001,0,0.1138>,<0.000077,0.9999993,-0.0011755>
CONSTR/LINE,PRTO,CYL2,CYL4,0.69
[COLOR=#2980b9]COMMENT/REPT,
.[17][/COLOR]
DIM LOC6= LOCATION OF LINE LIN3 UNITS=IN ,$
GRAPH=OFF TEXT=OFF MULT=20.00 OUTPUT=BOTH HALF ANGLE=NO
AX NOMINAL MEAS +TOL -TOL OUTTOL DEV MAX MIN
X 1.5000 1.5001 0.0050 0.0050 0.0000 0.0001 1.5002 1.5001 ---------#--------
END OF DIMENSION LOC6
LIN4 =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
THEO/<0,0.69,0.113>,<1,0,0>
ACTL/<0.0001,0.6898,0.1128>,<1,-0.0000652,0.0001404>
CONSTR/LINE,PRTO,CYL3,CYL4,1.5
[COLOR=#2980b9]COMMENT/REPT,
.[9][/COLOR]
DIM LOC7= LOCATION OF LINE LIN4 UNITS=IN ,$
GRAPH=OFF TEXT=OFF MULT=20.00 OUTPUT=BOTH HALF ANGLE=NO
AX NOMINAL MEAS +TOL -TOL OUTTOL DEV MAX MIN
Y 0.6900 0.6897 0.0050 0.0050 0.0000 -0.0003 0.6898 0.6897 --------#---------
END OF DIMENSION LOC7
[COLOR=#2980b9]COMMENT/REPT,
.[34.1,DF]
.[35]
.[41,Y]
.[36,Z][/COLOR]
FCFLOC3 =POSITION : DATUM_B
FEATCTRLFRAME/SHOWNOMS=NO,SHOWPARAMS=NO,SHOWEXPANDED=NO,
SIZE TOLERANCES/1,DIAMETER,0.262,0.005,0.005
PRIMARY DIMENSION/POSITION,DIAMETER,0.003, ,,,A,B1,C
NOTE/FCFLOC3
FEATURES/DATUM_B,,
