Hey Kirbster26.....Quick question on how you are exporting your data. I was using print command in the report window and then outputting a .TXT file. But seems recently the .TXT is not able to output the feature control frame information. I have attached a snipet of my .TXT file. Wondering if I just have a formatting issue.
Export your stuff from PC-DMIS as a Text file. This is just an example of things you have to put in the Demon Comment/Report .[balloon number] positions Require a little more info. You can see on the bottom one balloon number identification DF= Diameter feature, Y= axis <the basic number if you want. Z=axis<same as Y 35=Position
[COLOR=#2980b9] COMMENT/REPT,
.[4][/COLOR]
DIM LOC5= LOCATION OF PLANE PLN3 UNITS=IN ,$
GRAPH=OFF TEXT=OFF MULT=20.00 OUTPUT=BOTH HALF ANGLE=NO
AX NOMINAL MEAS +TOL -TOL OUTTOL DEV MAX MIN
Z 0.1130 0.1128 0.0030 0.0030 0.0000 -0.0002 0.1129 0.1126 --------#---------
END OF DIMENSION LOC5
LIN3 =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
THEO/<1.5,0,0.113>,<0,1,0>
ACTL/<1.5001,0,0.1138>,<0.000077,0.9999993,-0.0011755>
CONSTR/LINE,PRTO,CYL2,CYL4,0.69
[COLOR=#2980b9]COMMENT/REPT,
.[17][/COLOR]
DIM LOC6= LOCATION OF LINE LIN3 UNITS=IN ,$
GRAPH=OFF TEXT=OFF MULT=20.00 OUTPUT=BOTH HALF ANGLE=NO
AX NOMINAL MEAS +TOL -TOL OUTTOL DEV MAX MIN
X 1.5000 1.5001 0.0050 0.0050 0.0000 0.0001 1.5002 1.5001 ---------#--------
END OF DIMENSION LOC6
LIN4 =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
THEO/<0,0.69,0.113>,<1,0,0>
ACTL/<0.0001,0.6898,0.1128>,<1,-0.0000652,0.0001404>
CONSTR/LINE,PRTO,CYL3,CYL4,1.5
[COLOR=#2980b9]COMMENT/REPT,
.[9][/COLOR]
DIM LOC7= LOCATION OF LINE LIN4 UNITS=IN ,$
GRAPH=OFF TEXT=OFF MULT=20.00 OUTPUT=BOTH HALF ANGLE=NO
AX NOMINAL MEAS +TOL -TOL OUTTOL DEV MAX MIN
Y 0.6900 0.6897 0.0050 0.0050 0.0000 -0.0003 0.6898 0.6897 --------#---------
END OF DIMENSION LOC7
[COLOR=#2980b9]COMMENT/REPT,
.[34.1,DF]
.[35]
.[41,Y]
.[36,Z][/COLOR]
FCFLOC3 =POSITION : DATUM_B
FEATCTRLFRAME/SHOWNOMS=NO,SHOWPARAMS=NO,SHOWEXPANDED=NO,
SIZE TOLERANCES/1,DIAMETER,0.262,0.005,0.005
PRIMARY DIMENSION/POSITION,DIAMETER,0.003, ,,,A,B1,C
NOTE/FCFLOC3
FEATURES/DATUM_B,,
Hey Kirbster26.....Quick question on how you are exporting your data. I was using print command in the report window and then outputting a .TXT file. But seems recently the .TXT is not able to output the feature control frame information. I have attached a snipet of my .TXT file. Wondering if I just have a formatting issue.
Export your stuff from PC-DMIS as a Text file. This is just an example of things you have to put in the Demon Comment/Report .[balloon number] positions Require a little more info. You can see on the bottom one balloon number identification DF= Diameter feature, Y= axis <the basic number if you want. Z=axis<same as Y 35=Position
[COLOR=#2980b9] COMMENT/REPT,
.[4][/COLOR]
DIM LOC5= LOCATION OF PLANE PLN3 UNITS=IN ,$
GRAPH=OFF TEXT=OFF MULT=20.00 OUTPUT=BOTH HALF ANGLE=NO
AX NOMINAL MEAS +TOL -TOL OUTTOL DEV MAX MIN
Z 0.1130 0.1128 0.0030 0.0030 0.0000 -0.0002 0.1129 0.1126 --------#---------
END OF DIMENSION LOC5
LIN3 =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
THEO/<1.5,0,0.113>,<0,1,0>
ACTL/<1.5001,0,0.1138>,<0.000077,0.9999993,-0.0011755>
CONSTR/LINE,PRTO,CYL2,CYL4,0.69
[COLOR=#2980b9]COMMENT/REPT,
.[17][/COLOR]
DIM LOC6= LOCATION OF LINE LIN3 UNITS=IN ,$
GRAPH=OFF TEXT=OFF MULT=20.00 OUTPUT=BOTH HALF ANGLE=NO
AX NOMINAL MEAS +TOL -TOL OUTTOL DEV MAX MIN
X 1.5000 1.5001 0.0050 0.0050 0.0000 0.0001 1.5002 1.5001 ---------#--------
END OF DIMENSION LOC6
LIN4 =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
THEO/<0,0.69,0.113>,<1,0,0>
ACTL/<0.0001,0.6898,0.1128>,<1,-0.0000652,0.0001404>
CONSTR/LINE,PRTO,CYL3,CYL4,1.5
[COLOR=#2980b9]COMMENT/REPT,
.[9][/COLOR]
DIM LOC7= LOCATION OF LINE LIN4 UNITS=IN ,$
GRAPH=OFF TEXT=OFF MULT=20.00 OUTPUT=BOTH HALF ANGLE=NO
AX NOMINAL MEAS +TOL -TOL OUTTOL DEV MAX MIN
Y 0.6900 0.6897 0.0050 0.0050 0.0000 -0.0003 0.6898 0.6897 --------#---------
END OF DIMENSION LOC7
[COLOR=#2980b9]COMMENT/REPT,
.[34.1,DF]
.[35]
.[41,Y]
.[36,Z][/COLOR]
FCFLOC3 =POSITION : DATUM_B
FEATCTRLFRAME/SHOWNOMS=NO,SHOWPARAMS=NO,SHOWEXPANDED=NO,
SIZE TOLERANCES/1,DIAMETER,0.262,0.005,0.005
PRIMARY DIMENSION/POSITION,DIAMETER,0.003, ,,,A,B1,C
NOTE/FCFLOC3
FEATURES/DATUM_B,,
So you must be using 2020R2? Because with the new Geometric Tolerance in your callout. It's not spitting it out correctly in TXT form. You might want to call up XpertInspection and ask them if they are aware of this. I'm using R1, No reason to move forward if all my prints are 2009 and older.
