Problem Rotation

i have this code:

STARTUP    =ALIGNMENT/START,RECALL:,LIST=YES
            ALIGNMENT/END
            MODE/DCC
            FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,OUTTOL, , 
            LOADPROBE/1MM
            ASSIGN/AUX=2
            IF/AUX==1
            ASSIGN/AUX=100
            END_IF/
            IF/AUX==2
            TIP/T1A0B0, SHANKIJK=0, 0, 1, ANGLE=0
            ASSIGN/AUX=200
            END_IF/
            IF/AUX==3
            ASSIGN/AUX=300
            END_IF/
            IF/AUX==4
            TIP/T1A45B0, SHANKIJK=0, 0.707, 0.707, ANGLE=0
            ASSIGN/AUX=400
            END_IF/
C1         =COMMENT/YESNO,NO,AUX

Result:
AUX = 200 OK
TIP = T1A45B0 WHY??
________
N02 VAPORIZER

Parents

dph51 over 14 years ago

This doesn't work:

STARTUP    =ALIGNMENT/START,RECALL:,LIST=YES
            ALIGNMENT/END
            MODE/MANUAL
            PREHIT/ 4
            RETRACT/ 4
            MOVESPEED/ 50
            FLY/ON,3
            FORMAT/TEXT,OPTIONS,ID,HEADINGS, , ;MEAS,NOM,TOL,DEV,OUTTOL, , 
            LOADPROBE/05BY10BYTP2
$$ NO,/*
     ,/* SELECT CASE FOR PROBE ROTATION
     ,/*
C3         =COMMENT/INPUT,NO,'SELECT :   A0B0   -   ENTER '1'
                            ,                   A45B90   -   ENTER '2'
                            ,                   A45B-90   -   ENTER '3'
                            ,                            ANY OTHER NUMBER EXITS LOOP'
$$$$ NO,***************************************************
            SELECT/C3.INPUT
            CASE/1
            TIP/T1A0B0, SHANKIJK=0, 0, 1, ANGLE=0
            END_CASE/
            CASE/2
            TIP/T1A45B90, SHANKIJK=-0.7071, 0, 0.7071, ANGLE=90
            END_CASE/
            CASE/3
            TIP/T1A45B-90, SHANKIJK=0.7071, 0, 0.7071, ANGLE=-90
            END_CASE/
            END_SELECT/

It rotates back to the last probe rotation used. Sorry

Reply

dph51 over 14 years ago

This doesn't work:

STARTUP    =ALIGNMENT/START,RECALL:,LIST=YES
            ALIGNMENT/END
            MODE/MANUAL
            PREHIT/ 4
            RETRACT/ 4
            MOVESPEED/ 50
            FLY/ON,3
            FORMAT/TEXT,OPTIONS,ID,HEADINGS, , ;MEAS,NOM,TOL,DEV,OUTTOL, , 
            LOADPROBE/05BY10BYTP2
$$ NO,/*
     ,/* SELECT CASE FOR PROBE ROTATION
     ,/*
C3         =COMMENT/INPUT,NO,'SELECT :   A0B0   -   ENTER '1'
                            ,                   A45B90   -   ENTER '2'
                            ,                   A45B-90   -   ENTER '3'
                            ,                            ANY OTHER NUMBER EXITS LOOP'
$$$$ NO,***************************************************
            SELECT/C3.INPUT
            CASE/1
            TIP/T1A0B0, SHANKIJK=0, 0, 1, ANGLE=0
            END_CASE/
            CASE/2
            TIP/T1A45B90, SHANKIJK=-0.7071, 0, 0.7071, ANGLE=90
            END_CASE/
            CASE/3
            TIP/T1A45B-90, SHANKIJK=0.7071, 0, 0.7071, ANGLE=-90
            END_CASE/
            END_SELECT/

It rotates back to the last probe rotation used. Sorry

Children

No Data