Dear everybody!
This is my first post.
has anybody an idea?
my problem is next.:
I got a question about DMIS from one user, and I can not find a solution yet.
The following should be the case. During the test run (animate path) in online version the
graphical display shows the movement of the animation continuously displays the head(wrist) in
a position in which the reality , not programmed , and the animation does not follow the orders of
the head rotation. and shows the rotation, but the following points already feel bad re-animated
shows head position . In offline version, it can not be experienced.
I would ask for help if you can ..
Thanks..
p.s.: my ver.: 2011 mr1
I have this happen quite often. The way to correct it so the probe shows the correct orientation is to "clean" up the vectors in the manual features that are used in the first (manual) alignment. They should all be 0,0,1 as an example or whatever the theoretical of each features is. This does not happen prior to any other alignments. Remember to answer no to updating features with the new alignment when you make a change or your nominals for features after the alignment will change. I am in the habit of always correcting these before I continue any other programming. It makes for cleaner programs and less glitches.
I have this happen quite often. The way to correct it so the probe shows the correct orientation is to "clean" up the vectors in the manual features that are used in the first (manual) alignment. They should all be 0,0,1 as an example or whatever the theoretical of each features is. This does not happen prior to any other alignments. Remember to answer no to updating features with the new alignment when you make a change or your nominals for features after the alignment will change. I am in the habit of always correcting these before I continue any other programming. It makes for cleaner programs and less glitches.