hexagon logo
Register Sign in
  • Replies 6 replies
  • Subscribers 221 subscribers
  • Views 105 views
  • Users 0 members are here
Options
Related

Disconnected from PC-DMIS

tdedwards
This is the first time attempting to utilize PC Dmis Gear on our machine. When creating the alignment the Alignment wizard does not pop up as stated in Step 7 (after clicking Measure). I did some looking at the screen & noticed on the Status Bar at the bottom shows that PC DMIS is Disconnected even if I have PC DMIS already up. I think this is the issue. See attachment
I am running PC DMIS 2010 & Gear 2.3. Any help would be greatly appreciated.
Parents
  • Before you can measure you need to
    1 fill in the parameters definition windows, parameters/pitch&runout/profile/helix&lead tabs
    2 create a part alignment. yes check mark generate
    Note watch where this is saved under the alignment file name.
    3 now you can measure. yes check mark generate
    Note the align file is the same file that the align program wrote to ( this is calling back that alignment)


    I have a instruction book I made for me if this may help.
    I might be able to get this in a pdf if needed.

    AL

    I did get my booklet in to a pdf. If you want it PM me your e-mail.
Reply
  • Before you can measure you need to
    1 fill in the parameters definition windows, parameters/pitch&runout/profile/helix&lead tabs
    2 create a part alignment. yes check mark generate
    Note watch where this is saved under the alignment file name.
    3 now you can measure. yes check mark generate
    Note the align file is the same file that the align program wrote to ( this is calling back that alignment)


    I have a instruction book I made for me if this may help.
    I might be able to get this in a pdf if needed.

    AL

    I did get my booklet in to a pdf. If you want it PM me your e-mail.
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement