hexagon logo
Register Sign in
  • Replies 16 replies
  • Subscribers 225 subscribers
  • Views 244 views
  • Users 0 members are here
Options
Related

Calibration - Standard Deviation exceeds limits

mgroll77
I am having a problem getting my 1mmx27.5 probe tip to calibrate.

I have cleaned the 1mm ruby tip and the calibration sphere. I even changed out the 1mm tip with a new one.

Here is the report:

Probe file=T-PROBE_T1X27_M2 Date=6/17/2013 Time=10:05:21 AM

T1A0B0 THEO X 0.000 Y -5.700 Z 124.320 D 1.000
T1A0B0 MEAS X -0.030 Y -5.615 Z 124.425 D 0.895 StdDev 0.013

Why does the diameter keep coming out to 0.895?
Parents
  • yes there is ...F10 / OPTIONAL PROBE TAB

    I know this is old but for the record this does not work with anything except an analog probe. Trigger force is set by the module with a tp20 system and with an MIP head if you rotate to a90 you will see a little Allen screw that is exposed. This affects trigger force and should be adjusted with a calibrated gram gage.
Reply
  • yes there is ...F10 / OPTIONAL PROBE TAB

    I know this is old but for the record this does not work with anything except an analog probe. Trigger force is set by the module with a tp20 system and with an MIP head if you rotate to a90 you will see a little Allen screw that is exposed. This affects trigger force and should be adjusted with a calibrated gram gage.
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement